PROVN OF GUEST ROOM AT HQ COMD OFFR MESS AREA OF AGE BR I UNDER GE EAST LUCKNOW

Amount

Execavtion in trenches n.exc. 1.5 mtr wide & n. exc. 1.5 mtr deep in soft/loose soil & getting out complete all as specified and directed

M & L for PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in foundataion fiiling & mass concrete complete all as specified and directed .

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6complete all as specified and directed .

M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Returning, filling in including spreading, levelling watering & well ramming in layers n.exc. 25CM thick in soft/loose soil complete all as specified and directed.

Spreading & levelling in layers n.exc. 25 CM thick well ramming including watering as required. complete all as specified and directed.

Removing excavated mtrl n.exc.50 Mtr & depositing where directed at a level n.exc.1.5Mtr above the starting point. complete all as specified and directed.

M & L for 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone agg as in sub base of flooring complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M & L for 40mm thick DPC in PCC (1:2:4) type B-0 with WPC @3% by wt to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M & L for rendering 15mm thick in CM(1:6) on other than fair faces of brick/concrete work finishing even & smooth without using extra cement. complete all as specified and directed.

-Ditto- as item no 11 above but in CM (1:4) on fair faces of brick work. complete all as specified and directed.

-Ditto- as item no 11 above but 5mm thick in CM(1:3) on ceiling complete all as specified and directed.

M & L for RCC M-25 as in slab supported on walls beams & columns in floors, roofs, landing using 20mm graded stone agg complete all as specified and directed by Engr-in-Charge

M&L for RCC design mix (M-25) using 20 mm graded stone aggregate for foundation footings plinth beams, cloumns etc all as specified and directed by Engineer -in-charge. Note Reinforement shall be measured and paid seperately under relevent item. complete all as specified and directed.

M&L for M-25 RCC for Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

M & L for M-25 for RCC type B-1 as in lintels, beam etc. over 1.5mtr span. complete all as specified and directed.

M & L for RCC (1:2:4) type B-1 as in Chajjas complete all as specified and directed.

M & L for TMT bars 10mm dia & over cut to length bent to shape required including, cranking binding with & including MS wire not less than 0.90m dia or securing clips. complete all as specified and directed.

-Ditto- as per item no-19 above but MS bar as in stirrups, spacers & binders etc. 5 mm dia and over up to and including 10 mm dia bar. complete all as specified and directed.

M & L for steel formwork to sofits of suspended slabs as roof slabs, floor slabs & similar work n.exc. 250mm thick on rough finished surface of concrete. complete all as specified and directed.

-Ditto- as item 21 above but to sides and soffits of beams , lintels etc. complete all as specified and directed.

-Ditto- as item 21 above but to chajjas including edges complete all as specified and directed.

M & L for steel Formwork to edges of concrete flats n.exc. 10cm wide complete all as specified and directed.

M&L for steel formwork to rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Ditto as per item No 25 above but to sides of rectangular pillars, posts, columns etc. complete all as specified and directed.

M & L for applying two coats of plastic emulsion paint over a coat of Birla putty over a coat of primer on new plastered surface including preparation complete all as specified and directed.

M & L for applying two coats of plastic emulsion paint on ceiling over a coat of Birla putty over a coat of primer on new plastered surface including preparation complete all as specified and directed.

M & L for mechanical sander (having mechanical vaccum mechanism) with sandindg pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour including applying minimum 1mm thick wall care putty over prepared surface to achive the even and smooth surface for paniting including applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over putty complete all as specified and directed. (Note: Primer and emulsion to be carried out through airless spray machine) complete all as specified and directed.

M & L for Hardcore of guage n.exc. 63mm, deposited spread & levelled in layers n.exc.15CM thick, waterd & rammed to a true surface using broken bricks 50 MM thick. complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using extra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). complete all as specified and directed.

M & L for rendering 20mm thick in CM(1:4) on fair faces of brick/concrete work with WPC and finishing the surfaceeven & smooth without using extra cement. complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

S&F glazed ceramic coloured tiles 7 to 8 mm thick 900 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in colour cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceedubg 0.18 Sqm but not exceeding 0.36 Sqm , in floors etc set in on 15 mm thick in net cement screed (1:4) slurry and pointed incl white or colour cement to match complete all as specified and directed.

M& L for Virified Ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm,n.exc 1 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

All as per above item No. 36 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 complete all as specified. complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

S&F PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and as directed.

S & F fancy type chromium plated cast copper alloy fancy type bib taps long shank with capstan head & cup 15 mm dia bore complete all as specified and as directed.

S & F 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed.

S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed..

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.

S&F PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed .

S&F CP grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed.

S&F single lever Basin mixer without popup waste with 450 mm long peraidal etc complete all as specified and directed.

S&F 15 mm bore 2-way bib cock with flange etc complete all as specified and directed.

S&F 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with capston head sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F vitreous china wall hung WC, UF seat close seat cover, hinges, accessories set of size 360 x 580 x 360 mm fixed to wall/floor with P/S trap complete all as specified and ditected.

S&F single piece slim concealed cistern body with installation kit & s type, drain pipe, connection set for wall hung WC complete including connection with GI pipes or connection pipe with flush control plate complete all as specified and ditected

S&F vitreous china table top Wash Hand Basin of size 500 x 425 x 130 mm with bottle trap complete all as per manufacturer's instruction. complete all as specified and directed.

S&F health faucet (ABS Body) with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed.

S&F brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type complete all as specified and directed.

S&F towel ring 200mm dia superior quality fixed all as approved complete all as specified and directed.

S&F PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed

S&F chromoium plated box type toilet paper holder fancy complete all as specified and directed.

S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed long body for kitchen sink complete all as specified and directed.

S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S&F CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed.

S&F CP shop dish fancy type etc fixed on wall surfaces etc complete all as specified and directed.

S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed.

Supply & fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. complete all as specified and directed.

M&L Applying two coat of melamine wood polish on new wooden surface surfaces incl prep and applying sealer/filler etc to have smooth and glossy finish surface to the entire satisfaction of GE. complete all as specified and directed.

S&F 18/19 mm thick block baord grade 1 quality exterior grade, decorative type with decorative face veneer on one face and other front face is laminated with 0.90 mm decorative lamination type I with approved by Engr-in-Charge. complete all as specified and directed.

S&F IInd class hard wood plain, soild chowkhats and frames wrought,framed rebated on the solid rounded or chamfered put together with glue pined at jints complete all as specified and directed. at site

S&F 35 mm thick second class hard wood locally fabricated glazd and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with palin chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels. Commercial type on both sides incl 4.00 mm thick MDF board on both sides of flush shutter with adhesive and necessary fixtures including 0.9 mm thick decorative laminate type B-1 both of surface finish, colour and pettern approved, fixed with approvedadhesive complete all as specified and directed. by Engr-in-charge.

S&F auto hinges of 3"X2"X1" size SS body complete all as specified and directed.

S&F continous piano hinges of brass with width 30mm of flap . complete all as specified and directed.

S&F 125mm butt hinges extruded brass with mild steel hinge pin,bright polished and fixed, type B - 11 complete all as specified and directed.

S&F brass handle ,extruded, fabricated type polished 150mm long. complete all as specified and directed.

S&F brass sliding door bolt 300mm long with sand or die-cast brass hasp & staple(bolt type) and fixing bolts and sliding bolt with rolled or drawn brass bolt . complete all as specified and directed.

S&F 200 mm long brass barrel tower bolts with barrel of extruded section. complete all as specified and directed.

S&F providing and fixing factory made UPVC white colour slinding window three track made of extruded profiles with wall thickness of 2.3 mm (+ 0.2 mm). Window profile with hallow section with multi chamber. Frame (88 mm x 52mm) sliding sash (42 mm x67 mm). sliding mesh sash (42 mm x 57 mm) sliding interlock (one verticale length in each shutters) (45.5 mm x28mm), Glazing bead (24.5 mm x 16 mm) will be mitred cut and fusin welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arragement for fixing of hardware. EPDM gasket1.2+- 0.2 mm thick galvanise steel frame 30 mm x18 mm) 2 Nos, slinding sash (30mmx18 mm), sliding mess sash (26 mm x10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x100 mm long fasteners (Hardware : Touch Lock of zinc zlloyed (white powder coated) steel rollersystem. stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and required accessories. area exceeding 2.00 sq.m each complete all as specified and directed.

Supply and Fixing sheet glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

S& F white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including all necessary fittings for connecting with pipe line, metal lockable cover. complete all as specified and directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hidesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete. complete all as specified and directed.

S&F in repair gun metal gate valves with iron wheel head 20mm complete all as specified and directed.

S&F for SGSW pipe of 150mm bore including jointing with cement joints with PCC bed and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore SWG pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line , complete all as specified and directed.

M&L for LLDPE septic tank 10 user complete all as specified and directed by Engr-in-Charge.

M&L for construction of soakage well of size 1.8 m dia and 3.00 m deep complete all as shown in CELZ TD drawing complete all as specifed and directed by Engr-in-Charge.

S&F providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets or metal frame work and reinforced with GI wire mess including cornices GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI plate and steel expansion tasteners with and including ceiling section (n. exc 1.2m length) of 0.55mm thickness having kurved web of 50mm and flange of 26mm each with lips of 10.5mm thick to the intermediate channel with connection clips across the intermediate channel at 457mm centre to centre etc complete all as specified and directed by Engineer – in – Charge .

M&L for GI wire netting 0.91 mm dia and 12mm mesh lathing to mettal studing in ceiling including all laps and cutting waste etc complete all as specified and directed by Engineer – in – Charge .

M&L for ATT, treatiy the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for treadiy top surfaces of filled earth at the rate of 5 litres of emulsion per Sqm of surface the soil under plinth protection at the rate of 5 litre of emulsion per square of surface area complete all as specified and directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc curtain rods 22 - 25 mm dia including Knobs and brackets complete all as specified and directed.

S&F PVC cabinate shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination and other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings (handle, magnet, autohinge etc )as per site requirmented as per make and specification mentioned as per drawing and all are specified and directed. Note:- Density of PVC soild sheet should not be less than 575 Kg/cum. complete all as specified and directed.

S&F 8 mm thick toughened glass door shutter/partition of opening size less than 4.00 Sqm in single leaf with necessary eatching including and pivot at top fance type glass handle of size not less than 300 mm on both sides of shutter to match with colour of glass shutter top and bottom aluminium CP rail with suitable locking arrangement and all necessary fitting complete all as specified and directed.

S & F anti finger print stainless steel body shower panel of size 1600 x 200 cm including inbuilt ABS top shower with 60 nozzles + shower, ABS body massage jets, chrome plated ABS hand shower, Brass spout, embedded shelf, brass faucet body with thermostat mixer, multifunction water diverter for top shower, waterfall, hand shower, body jets spout, 40cm stainless steel branded hose, 1.5cm stainless steel double locked flexible hoses complete all as specified and directed.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified and directed..

All as per Item No 93 hereinbefore but for One 5 A socket outlet on independent Board complete all as specified and directed.

All as per Item No 93 hereinbefore but for One 5 A socket outlet on same Board complete all as specified and directed.

All as per Item No 93 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and directed.

Supply and fix frame plate with match cover one module plate complete all as specified and directed.

All as per item No.97 above but two module complete all as specified and directed.

All as per item No.97 above but three module complete all as specified and directed.

All as per item No.97 above but four module complete all as specified and directed.

All as per item No.97 above but six module complete all as specified and directed.

All as per item No.97 above but eight module complete all as specified and directed.

All as per item No.97 above but twelve module complete all as specified and directed.

Supply and fix terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

Supply and fix terminal box suitable two modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 105 above but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 105. above but four modular plat of size 128X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 105. above but six modular plat of size 210X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 105. above but eight modular plat of including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 105. above but twelve modular plat of including cutting, grooving and plastering etc. complete all as specified and directed..

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed.

Supply and fix Modular Regulator 230V AC 50 HZ SP two module complete all as specified and directed.

S&F modular bell push single pole 1 module6 Amp, 240 volt complete all as specified and directed.

S&f call bell , ding dong / musical AC single phase 230 volts complete all as specified and directed.

Supply and fix of MCCB DB SPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified and directed.

Supply and fix of MCCB DB VTPN 4 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified and directed.

Supply and fix MCB SP 230V, 6-32 Amps capacity complete all as specified and directed.

Supply and fix MCB SPN 230V, 32 to 63 Amp capacity complete all as specified and directed.

Supply and fix MCCB FP 415V, 63-100 Amp 17K capacity complete all as specified and directed.

S&F Ceiling rose PVC polycarbonate complete all as specified and directed.

S&F LED tube light fittings 20/22 W extruded aluminium housing abs end cap PC diffuser voltage protection 140v-270v cct-6500k, surge protection 2.5 kv cri>80, 100lm/w lumen 2400 complete all as specified and directed.

S&F 600mm, 10 watt LED Mirror light fitting complete all as specified & directed.

S&F surface/ceiling mounting LED down lighter of 9-15 watt warm white/white colour square shape white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover complete all as specified and directed

S&F surface/ceiling mounting LED down lighter of 6-9 watt warm white/white colour square shape white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover complete all as specified and directed

S&F LED building security light with bracket 36W IP 65 including one number MS clamps made of 25X3 mm flat iron with bracket of GI pipe light grade 25mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete all as specified and directed

S&F of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed.

S&F LED bed side fitting 3 Watt 3000K 150lm complete all as specified and directed. .

S&F decorative wall mounted fancy light fitting made up of brass rubi lamp brand double handed item code 119598240 including of thred type bulb of 9-15 watts covered by glass complete all as specified and directed.Note:- All old light fittings from item No 33 to 40 will be handover to MES store.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB complete all as specified and directed.

Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. complete all as specified and directed. including testing on completion.

S& F of ceiling fan 26V,1200 mm sweep, BEE 5 star rated incl. all accessories including electrical connection with required wire complete all as specified and directed.

Supply and fixing Wall fan 400 mm sweep single phase 230 V complete all as specified and directed.

Supply and fixing of of stationery storage type electric water heater storage ,capacity 25 ltrs ,BEE 5 star rated operated on 230 volts AC Vertical type working pressure 0.8 Mpa with multi funtion saftry valve and PUF installation including 4 Nos full threaded fastener of size 100x10 mm with two washer water connection with two no flexible steel hose pipe of size 15 mm 450 mm lengh and suitable plug top of 16 Amp capacity including required pipe connection with the pipe line of internal water supply complete all as specified and directed.

Supply and fixing Exhaust fan 300 mm sweep steel body fix existing wall complete all as specified and directed.

Supply and fixing Exhaust fan 250 mm sweep PVC body incl cutting wall for hole of exhaust fan and making good the surface finishing and maching with the existing wall complete all as specified and directed.

Supply and fix PVC pipe 25 mm dia for protection of cables complete all as specified and directed.by Eng-in-Charge

Supply and fix PVC pipe 80 mm dia for protection of cables complete all as specified and directed.by Eng-in-Charge

Supply and fix TV Socket 1 Module Modular complete all as specified and directed.by Eng-in-Charge

M/S S S A ASSOCIATES

M/S KAUSHIK CONSTRUCTION

QUALITY CONSTRUCTIONS CO

KUMAR ENTERPRISES