Construction of Permanent building for Kanchipuram Fire and Rescue Service Station and District office at Kanchipuram District under CM announcement scheme for the year 2021-22

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 m

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 m

2.6) Supply and filling of 40 mm HBSJ

2.7) Supply and filling of 20 mm HBSJ

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3m

b. T.W. below 2 m length.

23.3) Supply and fixing of Magnetic door catches

25) M.S.Holdfast

30) Ellispattern

31) Weathering course

37.1) White washing 3 coats (slaked)

39) M.s Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

46) Supplying and fixing of 20mm dia aluminium hanger rod

47) Supplying and fixing of aluminium towel rails of 75cm long

48) Supply and fixing of 5 pin Coat stand

49) Supply and fixing of chromium plated 8 guage Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

52) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 a. 32mm dia Astm D schedule 40 threaded PVC pipe with necessary PVC/GI specials

b) 25mm dia Astm D schedule 40 threaded PVC pipe with necessary PVC/GI specials

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

55.2) Flat Back Urinal

61.2) Stoneware pipe dry condition a. 100 mm dia

63) 32 mm dia PVC waste pipe

Electrical arrangemnt 69) Supplying and fixing 15Amps 3 pin plug type socket on a suitable MS box 16g

72) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

74) Charges for assembling and fixing of ceiling fan

76) Supplying and laying of 8 SWG GI wire on wall below ground levels

77.3) Supplying, fixing and concealing of TV/Telephone line Socket

77.4) Supplying, laying and concealing of 20mm dia PVC pipe for TV/Telephone line

78) Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe(Type-I)

86) Providing pre-constructional Antitermite treatment

112) Supply and fixing of of Exsaust Fan 300 mm dia

Annexure 1.9.3.1)Bored cast sit piles installation of vertical cast in Situ Bored piles of following dia (using Standardised concrete mix M30 Grade) data a.450mm dia pile

1.9.4) Chipping of RCC pile head of following dia pile a.450mm dia pile

1.9.5) Mobilization charges inclusive of transportation to site assembling and dismantling the rotary pile equipment employed for the works for piles

1.9.6) Conducting Routine vertical compression load test for bored cast in situ RCC piles of following dia a.450mm dia pile

1.14.1) Prviding Augering 30 cm dia for compound wall (M20)

2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works

3.3.3) P.C.C. 1:8:16 using 20 mm broken brick jelly

3.8.1) P.C.C. 1:4:8 using 40mm hard broken stone jelly

6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.3.2) Standardised concrete Mix M20 Grade Concrete a. In Foundation and basement

b. Stilt / Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

f.In fourth floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/Stilt floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

10.2.2) Brick partition work in C.M.1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) a. In Foundation and basement

b. In Ground Floor/stilt floor

c. In First Floor

d. In Second Floor

e. In Third Floor

11.2.2) Brick work in C.M.1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

14.1) Precast Cupboard slab 20 mm tk.using standardised concrete mix M20 (annexure) a. In Stilt / Ground Floor

b. In First floor

c. In Second floor

d. In Third floor

14.II)Precast cupboard slab 40 mm tkusing standardised concrete mix M20 (annexure) b. In Stilt / Ground Floor

c. In First floor

d. In Second floor

e. In Third floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

18.9.1) Providing Form work and centering for portico area (Double stage) for reinforced cement concrete works having roof height 6m(or) above from floor level

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

21.7.3) Supplying and fixing of solid core flush door shutter of thickness 35mm a). door size 1.000 m x 2.100m (Single Leaf)

b) door size 0.900 m x 2.100m (Single Leaf)

22.3.2) Supplying and fixing of 5.5mm thick plain sheet Glass panels with, TW beading of size 35 x 12mm with aluminium bolts and nuts

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

22.3.4)Providing T.W.double leaf shutters with 9mm thick BWR Ply wood for cupboard/ward robes shutters

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound

33.2.1) Plastering in C.M. 1:5, 12 mm tk.

34.2.1) Plastering in C.M. 1:4, 12 mm tk.

35.2.1) Special ceiling plastering in cement mortar 1:3, 10mm thick

36.1) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M20)

b) Augering 30cm dia

44.6) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe

47.2) Supply and fixing of SS Towel rail (75cm length)

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 with fibre

52.4) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

52.9) Supply and fixing of 50mm dia MS clamp set

53.4) Supplying and fixing of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm

54.1.1) Supplying and fixing of of 15mm dia half turn CP long body tap

54.2.1) Supplying and fixing of of 15mm dia half turn CP short body tap

56.4.1) Supply and fixing of of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) Supply and fixing of of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5) PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1)PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with fitting

74.1) Supply and fixing of 19mm dia steam pipe for down rod of fan

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.8) Supplying and fixing 3 no of 32 Amps 500 volts grade porcelain fuse unit

80.2) Supplying and fixing of 1 no of 450x375x20mm thick TW plank

82.3.1)Supply and fixing of LED Street lighting luminaries suitable for fixing 30 watts LED lamp

84.3) Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1) Supplying and Fixing of three phase ELCB

93.1) Plastering with CM 1:3, 12mm with WPC

96.7)Supplying and laying of Rubber moulded hydraulic pressed Paver blocks 83mm thick

98.5.1) TW panelled door double leaves shutter with brass fittings of size . 1200X2100mm.

105.1) Run off 4 wires of 4 Sq mm. PVC insulated unsheathed single core multi strand fire retardant flexible copper cable for 3 phase EB service connection

105.3) Run off 4 Wires of 6 sqmm PVC insulated single core multi strand

108.7.1) Run off 4 Wires of 10 sqmm PVC insulated single core multi strand

144.2.2) Supplying and fixing of 100watts LED flood light fitting

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 C x 120 sq.mm. PVC LTUG aluminium armoured cable

b) 3.5 C x 185 sq.mm. PVC LTUG aluminium armoured cable From DG panel to the common panel

155.1) Supply and erection of 200 Amps capacity floor mounting type metering cubical type panel board

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 C x 120sq.mm. PVC LTUG aluminium armoured cable

b) 3.5 C x 185 sq.mm. PVC LTUG aluminium armoured cable

161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cable a) 3.5 C x 120 sqmm PVC LTUG aluminium armoured cable

b) 3.5 C x 185 sqmm PVC LTUG aluminium armoured cable

162.2.1) Supplying and clamping of PVC armoured LTUG cable(Above GL) a) 3.5 C x 120 sq.mm. PVC LTUG aluminium armoured cable(above GL)

c) 4 C 2.5sqmm. PVC LTUG aluminium armoured cable from alternator to the proposed DG panel on wall

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS 8034 without Panel Board of 3H.P capacity electric motor pump set with accessories at bore well for Single phase operation etc.. 20lpmx150mm

171.2.9) Supply and delivery of 3 HP Openwell submersible Pumpset 100 LPM x 75 M

171.5.2) Supply and fixing of horizontal three phase distribution board (DB) with MCBS 6 way triple pole and neutral MCB sheet

171.5.3) Supply and fixing of horizontal three phase distribution board (DB) with MCBS 4 way triple pole and neutral MCB

178) Earthing as per the ISI specification with an earth electrode of 2.1 m class 'B' GI pipe

179) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification

179.1) Supply and run of 25mm x 3mm tinned coated copper flat on surface

179.2) Supply and run of 25mm x 6mm copper strip on surface

180)Supply and run of 2 of No.8 copper wire for earth connections

207.3.1) Providing two coats of Plastic Emulsion PAINT including primer for inner walls

207.4.1) Providing two coats of Exterior Emulsion PAINT including primer for outer walls

213.1) Supplying and fixing of SRFC cover slab a.60cm x 60cm

b.30cm x 30cm

255)Providing plaster of paris cornice of shape

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder a) 9watts LED bulb

b) 12 watts LED bulb

255.6) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

255.8.3) Supply and fixing of 24 W LED 4000K 2'x2' square type Recessed fititing with LED

344.2) Supply and fixing of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.1) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3

362.2.2) Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm Flooring in C.M 1:3, 20mm thick

366.3.1) Supplying & fixing of Stainless steel Hand Rails for Staircase

367.1) Providing wooden Melamine polish for new wood work

379.8.3) Supply and fixing of Granite tiles 10mm thk Ruby red for flooring in CM 1:3, 20mm thk

379.8.5) Granite Tile wall cladding using 10mmtk (Ruby red) tile in C.M 1:2, 10mm tk .

379.7.1.1) Supplying and fixing of PVC Trims (Beading) suitable colour in toilet wall cladding

383.1) Providing single nosing to the edges of Granite slab at entrance steps

451.2) Supplying and fixing of Brass chromium plated Soap Tray of size 150 x100mm

451.3.2) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings a) CP two Way bib cock with health faucet

b) CP Shower Arm with Overhead Shower Rose

c) CP Angle cock tap

451.3.3) Supplying and fixing of best approved quality of following Stainless steel water supply/Sanitary fittings a) Stainless steel Health faucet

452.1) Supplying and fixing of 1000W/230W 50 c/s AC supply Automatic electric water heater with copper container with Glass wool / puf insulation, 3 core flex wire wilth M.S powder coated shell of 25 litres capacity

503.1) Supply and laying of required dia of Nylon rope

532.2) Providing one coat of Wallputty for new plastered surface

540.1.6.1) Supply ,delivery and installation of Hi - wall split Air Conditioner with copper coil ( 3 star rated) a) For 1.50 Tr Hi wall (3 star) mounting split type

b) For 2.00 Tr Hi wall (3 star) mounting split type

540.1.8.1) Supply, delivery and fixing of PVC water drain pipe 25mm with specials (For AC)

540.1.9.1) Supply and installation of following KVA capacity Automatic Voltage Stabilizer with time delay relay a. 5 KVA

540.2.1) Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3m supplied with AC unit)

608) Supply and fixing of PVC water supply (ASTM) (below GL) a.32mm dia

b.50mm dia

609.6) Supply and delivery of 150mm OD of PVC casing pipes (6kglcm2) as per IS 12818/ 2010

609.6.1) Supply and delivery of 150mm dia of Ribbed screen PVC casing pipes (6Kg/cm2) as per IS 12818/2010

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole a. 150mm dia casing pipes assembly

615.2.1)Labour charges for the erection of submersible pumpset in borewell/openwell a) Upto 5HP

615.3.1) Supplying and delivery of MS fabricated DOL panel control board 3 HP with ISI mark for three phase

616.4.1) Supply of following HDPE pipes for Submerssible pump in Borewell class 5 a) 32mm dia

619.2) Supplying and fixing of GM gate valves ISI mark a.32mm GM Gate valves

b.50mm GM Gate valves

619.2.1) Supplying and fixing of following dia GM Non return Valve a.50mm dia GM Non-Return valve

707.2.1) Supply and laying of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable

741.1.1) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in Flush with wall with earth connection ( For AC Plug )

778.2.4) Supplying and fixing in position of 8 mm thick Calcium Silicate Board Designed and Perforated for False Ceiling using GI perimeter channel

799.1) Drilling of borewell anywhere including transportation from one place to another place in alluvial soil or sedimentary starta mud circulation method 150mm dia a) Drilling of borewell in upto 76m

b) Drilling of borewell in 77m to 91m

c) Drilling of borewell in 92m to 106m

d) Drilling of borewell in 107m to 121m

e) Drilling of borewell in 122m to 136m

f) Drilling of borewell in 137m to 151m

799.1.2) Reaming of borewell from 150mm dia pilot bore up to 300mm dia bore a) Drilling of borewell in upto 60m

b) Drilling of borewell in 60m to 90m

c) Drilling of borewell in 90m to 120m

d) Drilling of borewell in 120m to 150m

799.3) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

799.3.1) Supply and fixing of 160 mm dia PVC endcap for borewell bottam and top cover including all cost.

832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

911.3.1) Supplying and laying of 1000 x 1000 x 300mm size ms 16 swg powder coated cable terminal box with two compartment with necessary bus bar connected with TNEB etc.,

931.8) Providing and fixing 4kg capacity ABC Stored Pressure type fire extinguisher ISI marked under IS:15683 complete with MAP 90 suitable for all classes of fire.

931.9Supply and fixing of Carbon-di-Oxide Gas Type 2kg capacity Fire Extinguisher

958.4) Design, Manufacture, supply, delivery, installation, testing and commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS / equivalent) of capacity 13 persons / 884 kgs

959.2)Supply, erection, testing and commissioning of 62.5 KVA Diesel Generator set of approved makes like (Kirloskar / equivalent)

959.3) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

959.4) Supply and installation of M.S. cable adopter box

959.5) Supply and installation of MS exhaust pipe

959.6) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia

959.7) Supply and insulation of exhaust pipe thermal insulation lagging

959.8) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe

959.9) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval

960.4.2) Numbering & lettering arrangements Supply and fixing of Aluminium TNPHC Emblem of 18" height

960.4.3) Supply and Fixing of 12" Height Aluminium letter s

960.4.4) Supply and fixing of 9" Height Aluminium letters

960.4.5) Supply and fixing of 20"x5" size plastic foam name plate

960.4.6) Supply and fixing of 24"x8" plastic foam name plate with vinyl cutting letter RWH Board

Britto Dhanasekaran

chendur construction company

Udayam Engineers and Builders Pvt Ltd

Haarine Associates

P GANGADARAN

Bidder Name

K BASKARAN

P GANGADARAN

Haarine Associates

chendur construction company

Britto Dhanasekaran

Udayam Engineers and Builders Pvt Ltd