Loading
Loading…
Loading…
Tender Value
₹4.2 Cr
EMD Value
₹6.3 L
Closing Date
29 Jun 2026, 9:30 pm
Karnataka State Road Transport Corporation
Construction of seizing yard at Tumakur
301472
KSRTC/2026-27/OW/WORK_INDENT176
Open
Other Works
KSRTC Divisional Controller Office Tumakuru
5 documents required · 5 mandatory
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To Qualify for award of this contract the tenderer must have valid Class -I Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification. Scan Copy of Valid contractors Registration Certificate.
To Qualify for award of this contract the tenderer, as a prime contractor, should have in his name Satisfactorily completed at least Similar Nature of Work /Pavement Concrete Work Costing not less than Rs 210.75 Lakhs. The work should have been commenced and completed in any year during the last five financial years (i.e from 01-04-2021 till date of submission) i.e the work must have commenced on or after 01-04-2021 and completed till the date of submission of tender. Note: The work done certificate shall clearly mention the date of commencement & date of completion. Scanned copy of the Work done Completion Certificate, Certified by an Officer not below the rank of Executive Engineer in case of works done in Govt/Public Sector under taking Only.
To Qualify for award of this contract the Tenderer Executed in any one Financial year during the last 5 years (i.e, during the years years 2021-22 , 2022-23 , 2023-24 2024-25 & 2025-26 the following minimum quantities of work in any of the Government / Public Sector Undertaking. To Qualify for award of this contract the Tenderer, as a prime contractor, should have in his name Executed in any one financial year during last five years i.e. years 2021-22 , 2022-23 , 2023-24 ,2024-25 & 2025-26 the quantities of works mentioned below1.Pavment Concrete M30 and above 1136.00 cum2. TMT/Mild Reinforcement Steel 58.90 Tonne3. RCC M20and above 192.00Cum4. Embankment 5200.00Cum5. Dry Lean Concrete(DLC) /Wet Mix macadam 1704.00Cum Scanned copy of the Work done Certificate, Certified by an Officer not below the rank of Executive Engineer in case of works done in Govt. Out of the total quantity executed in a single work, only the quantities executed in a particular financial year will be considered for evaluation.
To Qualify for award of this contract the tenderer in his name should have, in the last five financial years ( i.e. during the years 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26) achieved in at least two financial years a minimum average financial turnover of Rs 843.02 Lakhs (in all classes of civil engineering construction works only ).Scanned copy of audited profit / loss statement of at least two financial years in which minimum financial turnover of Rs. 843.02 Lakhs. is achieved . (Certified by Chartered Accountant along with UDIN and membership number only. Statement issued by others will not qualify for eligibility).
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity ( (Ax N x 1.5) B) WhereA Maximum value of Civil Engineering works, (updated to the financial year of Tender invited), executed in any one year during the last five years. (Completed as well as works in progress).B Value at price level (updated to the financial year of tender invited) of existing commitments and ongoing works to be completed during the next two years.N Number of years prescribed for completion of the work for which tender is invited.1.5 Multiplying factor for assessing the available tender capacity for works costing above Rs.100.00Lakhs.The bidder/Contractor must submit details of existing commitments and on going works to be completed in the Prescribed format only (Annexure - B) Details of the works which have been completed and final bill is yet to be settled should also be provided .In case the bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format duly signed by the bidder Details submitted in any other format or other format or submission of document in which the bidder himself has calculated the bid capacity will not be considered and will not qualify for eligibility.
Liquid assets and or availability of credit facilities of not less than Rs. 126.45 Lakhs (credit lines /letters of credit /certificates from Banks) for meeting the fund requirement etc.Scanned Copy of the Letter of Credit/From any nationalized Bank /Schedule bank (excluding Co-operative banks), clearly specifying name of the work (as per the prescribed format) (Annexure-A) LOC Note :The certificate should contains Name of the work, and address to the Executive Engineer, KSRTC, CE Division, Tumakuru with Valid dates and amount etc.
₹5,000
₹6.3 L
28 May 2026
28 May 2026
1 Jul 2026
19 Jun 2026
15 Jun 2026
Construction of seizing yard at Tumakur
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work(SRP-2023-24/V-3/3.1/15)
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISC...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction.(SR 2023-24 V1-P 7...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing, laying, spreading and compacting graded stoneaggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanical mixplant carriage of mixed Material b...
Construction of dry lean cement concrete Sub- base over aprepared sub-grade with coarse and fine aggregate conformingo IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement ratio ...
Construction of M40 Grade un-reinforced, dowel jointed,plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...
Providing and spreading non metalic floor hardner for concrete surface at 2.50 kg/sqm
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, screed vibratory, power floater, blade an...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 10cm thick patti as per specification.
Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 l/10 m² complete including cost of Priming...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing Size Stone masonry with hard stone in foundation & plinthwith Cement mortar 1:6 (1 cement : 6 coarse sand)(SR 2023-24 SRP-V-2/9/5.4)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Providing Mathi/Nandi wood frames of doors, windows, clerestorywindows, ventilators and other frames, wrought, framed or assembledincluding making plaster groves (excluding cost of cement concrete and...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) tobrick/stone masonary including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, includin...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
KSRB15-7 : Providing lime rendering for plastering to wall and ceiling, including cost of materials, labour, curing complete as per specifications.(SRP-2018-19/PG.NO-15.33/117)
Wall painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar drops and ...
Providing and laying Polished Glazed Vitrified tiles in floor with differentsizes (thickness to be specified by the manufacturer), with waterabsorption less than 0.08% and conforming to IS:15622, of a...
Providing and fixing flush door shutter made out of solid core blockboard type, well seasoned , chemicaly treated hard wood battens andinternal frame with minimum 45 mm wide wooden frame alrounddoor s...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including primingcoat with approved steel primer all complete. Fixed to opening...
Constructing brick masonry chamber of internal dimension 600x600mmand depth of 600mm (inner dimensions) with modular bricks of CD 75in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plasterin...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle g...
Providing and fixing brass bib cock of approved quality :15 mm nominal bore (P-117/13.2.1)V-II
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 58x440mm: (P-134/14.3.2)V-II
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (P-136/14....
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box (BESCOM Part-III/P-5/2.2.2)
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box (BESCOM Part-III/P-5/2.2.3)
Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and run...
25mm dia 2mm thick(BESCOM Part-III/P-2/1.2.2)
Open Conduit System :Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...
do. 10-12Way(BESCOM Part-III/P-8/3.3.6)
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
do. 10-12Way (BESCOM Part-III/P-8/3.4.6)
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Do- 10-12 Module (BESCOM Part-III/P-8/3.5.6)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch(BESCOM Part-III/P-9/3.6.1 )
Do- 6Amps 3way socket (BESCOM Part-III/P-9/3.6.3)
Do- Stepped Fan Regulator. (BESCOM Part-III/P-9/3.6.4)
Do- TV/Telephone socket (BESCOM Part-III/P-9/3.6.11)
Do-RJ45/I.O.outlet Cat-6 (BESCOM Part-III/P-9/3.6.12)
Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...
Do- 32mm(BESCOM Part-III/P-3/1.9.3)
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Do-2.5 sqmm(BESCOM Part-III/P-5/2.3.3)
Do- 4 sqmm (BESCOM Part-III/P-5/2.3.4)
Supplying and drawing UTP-CAT 6E LAN cable.(BESCOM Part-III/P-36/8.6)
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc , and fixing on existing wooden or metal box using N.F. screws.(BESCOM Part-III/P-9/3.8)
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Po...
LED Street light : .Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Inj...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...
Fixing all types and all capacities fluorescent / CFL / false ceiling fixtures indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round...
Supplying and fixing 32mm dia class A GI pipe bracket upto 2.7 meters long for fixing MV/SV/MH/FTL street light fitting of all capacities on wall using suitable clamps, bolts and nuts and wiring using...
Fixing a ceiling / wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 ampers ceiling rose, necessary length of 23/0.0076 inch PVC insulated...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
6-32Amps DP (BESCOM Part-III/P-17/5.18.4)
40Amps DP(BESCOM Part-III/P-17/5.18.5)
6-32Amps TPN(BESCOM Part-III/P-17/5.18.7)
40 Amps TPN((BESCOM Part-III/P-17/5.18.8)
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 ...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (BESCOM Part-III/P-19/5.34)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (BESCOM Part-III/P-19/5.38)
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Do-50x50x6mm (BESCOM Part-III/P-20/5.41.2)
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit shou...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip (BESCOM Part-III/P-54/12.58.2)
Do- 600x600x3mm Copper plate(BESCOM Part-III/P-54/12.58.11)
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Do- 3.5 core 25 sqmm(BESCOM Part-II/P-13/32.07)
Do- 3.5 core 50 sqmm (BESCOM Part-II/P-13/32.11)
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm(BESCOM/P-52/ 21.05)
Do- 35 to 95 Sqmm(BESCOM /P-52/ 31.06)
Providing and laying in position 100mm dia stone ware pipe in existing trench.((6.8) (As per 2019-20 PWD Ele SR)
Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wir...
Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries 60 /65 AH capacity.(BESCOM Part-II/P39/9.5.5)
Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R41...
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.(BESCOM PART-I/6.22/P32)
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable A ngle Iron support upto 3.0 Ton split/cassette type A/C.(BESCOM ...
SupplyofLEDfloodlight luminairewithpressurediecast aluminium housing
body for optimal thermal dissipation.Lamp compartment comprising ofanti
glare clear diffuserwithInjectionmoulded polycarbonate/clea...
Fabricating, supplyinganderectionof ...ms longhotdipGalvanized
OctagonalhotdipPolewithBSEN10025gradeS355JOsteelplate
for shaft, IS2062 for base platewithdoor opening arrangements,
including suitable b...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
annexure a_letter of credit.doc
Others - Letter of Credit • 0.03 MB
Tender notification seizing yard.doc
Others - Tender Notification • 0.73 MB
annexure b_bid capacity.doc
Others - Bid Cpacity - Annexure-B • 0.03 MB
kw4 seizing yard final.doc
Others - Bid Document • 0.98 MB
Download all tender documents and submit your bid