CONSTRUCTION OF SPORTS GROUND AND BEAUTIFICATION BY LAND SCAPING AND OTHER WORKS IN AMBEDKAR GOVT. COLLEGE DABWALI IN DISTT. SIRSA (PDG. E.I. STREET LIGHT ONLY).

Amount

a) Main Switches: Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections .HSR 31.12 v) Double pole switch 32 amp. 415 Volts, Cat-B

c) Moulded case Circuit breakers: Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.HSR 31.12 ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. HSR 31.13 ii) Size 40 mm x 40 mm x 6 mm.

M.S.Sheet .HSr 31.14: ) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. HSR 31.17 a) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB of 6 amp. to 32 amp.

iii) SPN MCB of 6 amp. To 32 amp.

x) TPN MCB of 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories. HSR 31.18: vii) Call bell 220 / 230 volts A.C. Bakelite with double coil.

xi) Bakelite angle / straight button holder large size.

xii)Switch 5 amp. On existing sheet.

xiii) Wall socket 5 amp. On existing sheet.

xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick Bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

(O) HSR 31.20 Erection and carriage of fans: (i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

(iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

(v) Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick.

(vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

(P) Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. HSR 31.21. xv) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness on surface.

xvi) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness on surface.

xxvii) Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) c) Size 25 mm dia.

(Q) Earthing HSR 31.22: i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .

Under Ground Cables. HSR 31.25: Supply and erection of under ground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. Make:- Havell's/ Polycab/ KEI/ RR Kable. xxvii) 25 Sq. mm 4 Core Ard. Cable .

xxix) 35 Sq. mm 4 Core Ard. Cable .

xxx) 50 Sq. mm 4 Core Ard. Cable .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . Make:- Havell's/ Polycab/ KEI/ RR Kable HSR 31.26. xIi) 25 Sq. mm 4 Core Ard Cable

xIii) 35 Sq. mm 4 Core Ard Cable .

xIiii) 50 Sq. mm 4 Core Ard Cable.

Supply and erection of suitable compression type brass cable glands for underground Cable. HSR 31.28. iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

Street Light. HSR 31.30: i) Supply and erection of 32 mm dia meter 1.5 meter long bracket ( B-Class ) making an angle of 10 to 15 degree with horizontal plane for mounting street light fitting fixing of GI bracket on wall with 2 Nos. , 32 mm x 3 mm thick MS clamps including the cost of cutting , welding of GI pipe complete with cement sand mixture , bolts and nuts etc. including necessary connections .

Pedestal . (V): M.S.pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embedded in cement concrete block of size 750 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 900 mm x 600 mm x 250 mm below ground level. HSR 31.33

Miscellaneous .HSR 31.35: iii) Supply and erection of caution notice plate in three languages

iv) Supply and erection of shock restoration chart in glass frame

vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of Bakelite sheet

xi) Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S.rod welded / revitted at the top with 10 cm. Dia 5 mm thick G.I.plate inscribed with `cable' world on it , having a cross arm 30 cm. long of the same dia welded at the bottom , in existing trench 45 cm. below ground level.

PVC Insulated wiring in recessed conduit. HSr 31.36: Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. i) Fan Point b) Medium Point

c) Long Point

ii) Light Point a) Short Point

b) Medium Point

c) Long Point

iii) Twin Control Light point with 2 way, 5 amp. Single pole switch a) Short Point

c) Long Point

vi) Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

b) Medium Point

c) Long point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe.HSR 31.40 i) Cable size 1.5 sqm(3/0.81 mm)

iii) Cable size 4 sqm(7/0.85 mm)

v) Cable size 10 sqm(7/1.35 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. HSR 31.41 ii) 8-way, SP&N (Horizontal)

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. HSr 31.44. b) 25mm dia

Supply and errection of double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. HSR. . i) HDPE pipe 63/50 mm outer dia/ inner dia 31.67

Supply and errection of Hot Dip Galavanized octagonal pole 3 thichness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of fundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galanized pole complet of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangments for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. HSr 31.68. i) 7 M long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12mm.

Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. HSr 31.69 ii) 4 Pole MCCB 100 amp

HIGH MAST POLE HSR 31.83: iii) Supply, installation, Testing and commissioning of 20 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 Nos. Luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-Charge.

NON SCHEDULE ITEMS: S/E of 60 W LED street light fitting warm white < 110 Lumens per Watt Philips / Bajaj / Crompton / Havell's/ Surya make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

NON SCHEDULE ITEMS: S/E of 200 W LED Flood light warm white luminaries with high power LED < 110 Lumens per Watt Philips / Havell's / Bajaj/ Surya make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

NON SCHEDULE ITEMS: Supply/ errection/ testing / commissioning of timelight distribution board 65 amp 3 pole / 230 Volts with digital time switch having suitable size of 1 TPN MCB, 1 contactor, 1 HRC fuse , 1 Indicator having IP 52 Degree protection all items should be of same make / manufacturer including padestal, including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-inCharge of the work. (Make:- IndoAsian/ Havell's).

NON SCHEDULE ITEMS: Supply & Erection of Single arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole.

NON SCHEDULE ITEMS: Supply & Erection of double arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole.

NON SCHEDULE ITEMS: Supply of 48” (1200 mm) ceiling fan complete with standard down rod, three blades fitted with double ball bearing ISI marked white/ glossy but without regulator (Orient/ Usha/ Khaitan Make).

NON SCHEDULE ITEMS: Supply of Industrial Heavy duty Exhaust fan 15” (375 mm) (1440 RPM) of Orient/ Usha/ Khaitan Make complete in all respect.

S/E of 20/22 W indoor LED Tube fitting with batten and tube, decorative ultra slim liniare LED lighting fixture with extruded with polycarborate housing/body environmental friendly, energy effiecent completed including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. (Make:- Philips/ Havell's/ Crompton.)

Less cost of existing 2x400 Watt Sodium Flood Light Fitting

Less Cost of existing Street Light fitting 45 Watt

GALAXY ELECTRIC SOLUTIONS

Chopta Offset Printers