Construction of RW Sub Division office Kishorenagar at Kishorenagar

Earthwork in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed of the foundation including cost of all labour required for the work etc. complete with all other T &P required for the work and stacking the excavated materials away from the working area as directed by the Engineer-in-Charge including 1% Cess.

Supplying and filling foundation and plinth with sand well watered & rammed with cost, conveyance, royalty and taxes of all materials labour required for the work as per specification and direction of the Engineer-in-Charge including royalty of materials including 1% Cess.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid.

R.C.C. M-20 having a minimum compressive strength(in work test) 200 Kg/cm.2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with I.S. 456 and I.S.516 using 20mm & down graded size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering laying and compacting concrete, watering and curing for 28days centering, shuttering, finishing the exposed surfacs inculding ceiling, smooth, providing grooves beads where necessary and providing, required No of fan Hooks as directed including, cost, conveyance, royalities and taxes of all materials and cost, of all labour and T & P required for the work etc. complete in all respect including 1% cess as per direction of the Engineer-in-Charge but excluding the cost of M.S.Rods or Tor steel and binding wire and labour charges for bending, binding and tying grills.

a) Column Base

b) Column & Beam(Ground Floor)

c) Column & Beam(First floor)

d) Plinth Band

e) Lintel Band

Ground Floor

First floor

f) Chajja(Ground floor)

g) Chajja(first floor)

f) Roof Slab(Ground Floor)

h) Roof Slab(First floor)

i) Stair case

Cutting, streightening the bent up M.S./TS Rods bending, binding, welding, jointing if necessary and tying the grills and placing in position, as required for R.C.C work and for providing required No. of Fan Hooks hoisting, lowering, laying including, cost, conveyance, taxes of all M.S. Rods or Tor steel and binding wires of 118 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) including 1% cess as per direction of the Engineer-in-Charge

a) Ground floor

For Head Room (1st Floor)

Fly Ash bricks masonary (1:6) using 25cm x 12cm x 8 cm size bricks having crushing strength not less than 75 kg/cm2 including splays cutting, circular, moulding and corbelling, champhering and similar such type of works watering and curing etc. complete, including, cost, conveyance, royalities and taxes of all materials and cost of all labour and T & P required for the work etc. complete including 1% cess and as per the specification as directed by the Engineer-in-Charge

a) In Foundation & Plinth(Ground floor)

b) In Superstructure(Ground Floor)

b) In Superstructure(First floor)

Cement concrete work(1:2:4) using 12mm to 20mm size black hard crusher broken granite chips of approved quality and from approved chips of approved quality and from approved quarry including hoisting, lowering laying and compacting concrete, watering and curing for 28days including finishing the exposed surfacs including, cost, conveyance, royalities and taxes of all materials and cost, of all labour and T & P required for the work etc. complete in all respect including 1% CESS as per direction of the Engineer-in-Charge

12 mm thick cement plaster(1:6) over brick massonary finished smooth, after racking out the joints including watering, and curing with cost, conveyance, royalities and taxes of all materials, and cost of all labour and T & P required for the work complete including 1% cess as directed by the Engineer-in-Charge

a)Ground floor

b) First Floor

16 mm thick cement plaster(1:6) over brick massonary finished smooth, after racking out the joints including watering, and curing with cost, conveyance, royalities and taxes of all materials, and cost of all labour and T & P required for the work complete including 1% cess as directed by the Engineer-in-Charge

a)Ground floor

b) First Floor

20 mm thick C.P in CM ( 1:4) in grading plaster over roof slab including cost of all labour , material etc complete including 1 % cess & as per direction of Engineer-in-charge

Providing and fixing Ceramic tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge.

Providing and fixing Ceramic tiles in dados, skirtings and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. .

Cement washing one coat with cement over new plaster surface including all cost , conveyance , royalties, taxes of all labour , material etc complete including 1% cess as per direction of the Engineer-in-Charge

Ground Floor

First floor

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge.

Ground Floor

First floor

Priming one coat with approved Water Bound Wall cement Primer on Plastered Surface.

Ground Floor

First floor

Distempering two coats to wall with approved distemper of approved shade including cost, conveyance & taxes of all material, labour etc complete including 1% cess and as per specification and direction of the EIC.

Ground Floor

First floor

Finishing walls with weather coat of approved shade on new work two coat over acoat of primer to give an even shade including cost of all materials, labour charges, T&P etc required for the work complete. including 1 % cess. as per direction of the Engineer-in-charge.

Ground Floor

First floor

Providing and fixing of WPC door frames with rebate cuts and finished cross section size 75mm x 45mm or 90mm x 50mm, including cost of all materials, cost of all labour conveyance, taxes, loading, unloading scaffolding, slaging watering and curing, T&P, etc, complete as per the direction of the Engineer-in-charge.

Supplying , fitting & fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thk laminate on both side of approved design and quality including cost of all door fittings and fixtures etc, complete.

Supplying, fitting & fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD.). Ventilator/ Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM, weathering seal resistant accessories, like clipping Jocking system tone including cost and conveyance of all materials, accessories, labour charges, materials Nuotiosoite pine thermobninstalled at the nonaktsmeners, silicon rubber sealant, easy glazing/deglazing at site etc..and product conforming to ASTM D 638-14.EN-477-95 and other applicable codes and standards.

Providing , fitting & fixing Steel Angle Iron doors & windows frame with M.S grill manufactured from standard rolled steel angle section 50 mm X 50 mm X 6 mm cornered of the frame duly metered and electrically welded with fish tail hold fasts made out of M.S flats of size 200 mm X 50 mm X 30 mm wide & 5 mm thick at the rate of 4 nos per frame with M.S hinges of size 75 mm & 14 SWG thick at the rate of 3 nos for each single leaf shutter tower bolt ring & M.S Grills made out of 19 mm x 5 mm flat properly welded to the window frame with one coat of anti corrosive red oxide zinc chrome primere as per direction of Engineer - in - Charge including 1 % cess .

Labour for fitting and fixing of M.S. grill door, window as per approved design etc complete as per direction of Engineer-in-charge.

Providing supplying fitting fixing of 5cm thick Precast RCC jally in ventilators/ Skylights with all cost labour T&P etc complete as per the direction of the E.I.C.

Supplying fitting and fixing of Stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90 Mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and spections.

Painting two coats with approved paint over a coat of primer of any approved shade with cost, conveyance, taxes of all materials, all labour and T&P required for the work including the cost of primer all other materials aetc complete including 1% cess as per direction of the Engineer-in-Charge.

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M40 grade of approved make, design, colour and size made by Blocking machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63-2018.