Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.1 LAccepted-AOC BIRWAN BRIDGE UDHAMPUR J K 182104 | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182104 | L1 | Accepted-AOC L1 | |
| 2 | L2₹66.5 L+₹4.4 L (7.02%)Rejected-Finance A 128 GOVINDPURAM GAZIABAD UTTAR PRADESH 201013 | GHAZIABAD | UTTAR PRADESH | 201013 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹70.8 L+₹8.6 L (13.9%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹75.1 L+₹12.9 L (20.7%)Rejected-Finance 135 CHAKRANA TIWARI CHAKA NAINI PRAYAGRAJ 211008 UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211008 | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹75.4 L+₹13.2 L (21.3%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L5 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | NATIONAL ROAD BUILDERS L1 | SINGH CONST CO L6 | vijay builders L4 | s s construction L5 | M/S GURU DEV BUILDERS L3 | M/S MRIGASYA INFRA L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dirt and mud of water sunken surface in roads, paths etc. cutting around edges to at least 25mm in depth making good by appling tack coat on bituminous surface with cationic bitumen emulsion RS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre, putting in Pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm complete, all as specified and as directed | 30 | Ten Square metre | 2,000 ₹60,000 | 1,200 ₹36,000 | 500 ₹15,000 Lowest | 3,000 ₹90,000 | 3,400 ₹1,02,000 | 2,500 ₹75,000 |
| 2.00 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing black top surfaces with paving bitumen primer using paving bitumen VG-10 grade @ 5 Kg per Ten Square Metre and including Bituminous premix asphaltic semi dense concrete 30mm (consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix with hydrostatic sensor paver finisher rolled and compacted to required camber and gradient using power roller 8 to 12 tonne, complete, all as specified and as directed. | 1,900 | Ten Square metre | 2,950 ₹56,05,000 Lowest | 3,600 ₹68,40,000 | 3,600 ₹68,40,000 | 3,600 ₹68,40,000 | 3,340 ₹63,46,000 | 3,100 ₹58,90,000 |
| 3.00 | Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed by the Engineer-in-Charge.
Note: Repair to pot holes any depth not exc 1 sqm each depression in patch over 50mm, shall also be carried out under this item. | 40 | Cubic metre | 5,000 ₹2,00,000 Lowest | 6,000 ₹2,40,000 | 7,300 ₹2,92,000 | 5,000 ₹2,00,000 Lowest | 7,200 ₹2,88,000 | 6,000 ₹2,40,000 |
| 4.00Note for item No. 1 to 3 : (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made. | |||||||||
| 5.00 | Preparation of butuminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on road/pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machineall as per manufacturer's instruction, complete all as specified and directed.
Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm. | 3,018 | Running metre | 40 ₹1,20,720 Lowest | 60 ₹1,81,080 | 50 ₹1,50,900 | 50 ₹1,50,900 | 50 ₹1,50,900 | 40 ₹1,20,720 Lowest |
| 6.00 | Convex mirror of 1000mm dia, made of polycorbonate material provided with 75mm dia mild steel medium weight pipe post of 108m high, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60 cm in repair including earth work & removing excavated soil to a distance not exceeding 50m, complete all as specified as directed | 4 | Each | 4,000 ₹16,000 | 8,000 ₹32,000 | 3,345 ₹13,380 Lowest | 5,000 ₹20,000 | 5,200 ₹20,800 | 15,000 ₹60,000 |
| 7.00 | S&F in replacement Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. | 25 | Each | 400 ₹10,000 | 799 ₹19,975 | 450 ₹11,250 | 600 ₹15,000 | 372 ₹9,300 Lowest | 1,200 ₹30,000 |
| 8.00 | Cat eye of size 110 mm x 120mmx20mm made of Aluminium, two reflectors fitted in the body, weight of cat eye 130 gm approx, designed for dynamic loads, fixed in repairs, complete all as specified and as directed. | 150 | Each | 300 ₹45,000 | 300 ₹45,000 | 325 ₹48,750 | 300 ₹45,000 | 320 ₹48,000 | 250 ₹37,500 Lowest |
| 9.00 | S&F in replacement Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tones water resistant. | 100 | Each | 1,600 ₹1,60,000 | 2,000 ₹2,00,000 | 1,350 ₹1,35,000 | 1,800 ₹1,80,000 | 1,160 ₹1,16,000 Lowest | 2,000 ₹2,00,000 |
Tender Value
₹93 L
EMD Value
₹1.6 L
Closing Date
30 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Udhampur
HQ CWE Udhampur
Spl repairs to road of 5071 ASC BN and 5171 ASC Bn (MT) area Loc under GE (North) Udhampur
2025_MES_742443_1
CWE/U(N)-73/2025-26
Open Tender
Civil Works
Item Rate
180 days
Udhampur
As per NIT
7 documents required · 7 mandatory
₹1,000
GE (North) Udhampur
₹1.6 L
4 Feb 2026
2 Dec 2025
1 Jan 2026
2 Dec 2025
30 Dec 2025
23 Dec 2025
Amount
Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dirt and mud of water sunken surface in roads, paths etc. cutting around edges to at least 25mm in depth making good by appling tack coat on bituminous surface with cationic bitumen emulsion RS-1 grade conforming to IS:8887 @ 5 Kg per Ten Square Metre, putting in Pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm complete, all as specified and as directed
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing black top surfaces with paving bitumen primer using paving bitumen VG-10 grade @ 5 Kg per Ten Square Metre and including Bituminous premix asphaltic semi dense concrete 30mm (consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix with hydrostatic sensor paver finisher rolled and compacted to required camber and gradient using power roller 8 to 12 tonne, complete, all as specified and as directed.
Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed by the Engineer-in-Charge. Note: Repair to pot holes any depth not exc 1 sqm each depression in patch over 50mm, shall also be carried out under this item.
Note for item No. 1 to 3 : (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.
Preparation of butuminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on road/pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machineall as per manufacturer's instruction, complete all as specified and directed. Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm.
Convex mirror of 1000mm dia, made of polycorbonate material provided with 75mm dia mild steel medium weight pipe post of 108m high, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60 cm in repair including earth work & removing excavated soil to a distance not exceeding 50m, complete all as specified as directed
S&F in replacement Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.
Cat eye of size 110 mm x 120mmx20mm made of Aluminium, two reflectors fitted in the body, weight of cat eye 130 gm approx, designed for dynamic loads, fixed in repairs, complete all as specified and as directed.
S&F in replacement Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tones water resistant.
M/S MRIGASYA INFRA (BID ID -3517736)
M/S GURU DEV BUILDERS (BID ID -3511703)
vijay builders (BID ID -3510623)
s s construction (BID ID -3517416)
SINGH CONST CO (BID ID -3510202)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
BOQ_831396.xls
BOQ • 0.43 MB
Tend.pdf
Tender Documents • 1.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .