SMART PERIODICAL SERVICES IN MD ACCN UNDER AGE B/R II, GE BABINA CANTT.

Amount

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats not less than 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

Note for item No. 1 to 4 :- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

Removal of plant/ treas/ Shrubs from roof tops/ sides, external walls of bldg, chajjas, wall junctions, junctions of rain water pipe/ CI soil/ waste pipe junctions including taking out the roots entered in wall/ slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement morter (1:2) including repairing the GI/CI/PVC pipe joint which were damaged during cutting/ taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/ staging and formwork upto a height of 15.00 m from the ground level complete all as specified.

M&L for preparation of old painted surface fo brick, stone, concrete, asbestos sheet or plastered surface of any description over 10cm width or girth and applying one coat of Apex paint exterior grade, complete all as specified and as directed.

M&L for a coat of JK/Birla wall care putty 1mm thick including prepration of surface complete all as specified and as directed.

M&L for preparation old treated surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation old treated surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on old treated surface of wall ect complete all as specified and directed.

M & L for preparation of surfaces and applying one coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed.

M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on new surface of wall with Primer etc. complete all as specified and directed.

M&L for preparation of New surfaces and applying two coats of cement base paint with primer on New Surface complete all as specified and directed.

M&L preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed. Note : All grass, trees should be removed from the chajjas, and wall during the time of white wash, No extra payment shall be paid to the contracotrs.

Description same as per item No.15 above but on ceiling in lieu of walls complete all as spedified and as directed.

M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as spedified and as directed.

M & L Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as spedified and as directed.

M & L Preparing newly plastered surfaces of Ceiling and applying three coats of white wash complete all as spedified and as directed.

M&L preparation of old decorated surfaces and writting letters n.exc 30cm high including back ground n.exc 450mm dia complete all as specified and directed

M&L for repeairing of RCC projection, Chajjas, columns, beams, Parapet wall etc. by necessary preparation i.e scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surfaces of damaged/loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3), reinforced with welded or fixed wire mesh and make good by 15mm thick plaster with cm (1:4) and item including scaffolding/ formwork etc upto triple story height complete all as specified and directed by Engr-In-charge.

Demolition of cement concrete (unreinfored) in ground floor and paving n,exc 15cm thickness (below or above ground level) and in any position complete all as specified and as directed.

M & L PCC 1:2:4 type B-0 using 12.5 mm graded store aggregate as in coping, kneelers, bed plates, kerbs etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as spedified and as directed.

M&L for 15mm thick rendering in CM (1:6) on brick/solid block masonry wall/ concrete surfaces finished even and smooth without using extra cement complete all as spedified and as directed.

M & L 5mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling complete all as specified and a directed.

Demolition of cement concrete (unreinforced) in any description and in any position not other wise specifically provided for complete all as specified at site complete all as spedified and as directed.

M&L for rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note :- WPC shall be measured and paid seprately)

M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian pant Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type D-2 (using 40mm graded bricks bats) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base, floors and pavings etc. complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as spedified and as directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spedified and as directed.

M&L for colour printed glazed ceramic tiles 600x300 mm x 6-7mm thick as in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed.

Taking down 15 mm bore steel tubing and connection including cleaning and removal to store etc complete all as specified and directed.

Taking down 20 mm bore steel tubing and connection including cleaning and or removal to store etc complete all as specified and directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.

S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.

S&F in repairs Brass 15mm bore bib taps fency type cast copper alloy Chromium plated with crutch handle screwed with long body for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/) complete all as specified and as directed.

S&F in repair 15 mm stop valve cast copper alloy screwed down high pressure with crutch handle (concealed type) screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.

S&F in repairs 15mm dia bore Fency type cast copper alloy chromium plated angle cock with long shank & cup complete all as specified and as directed.

S&F in repair two way angle valves with wall flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

S&F as in repair hand shower (health faucet) (ABS Chrome palted) with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge.

S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls including taking down old PVC /CI/Concrete pipe complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls including taking down old PVC /CI/Concrete pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm bore complete all as specified and as directed.

RAHUL ASSOCIATES (BID ID -3064563)