Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹31.5 L+₹58,438.01 (1.89%)Rejected-Finance C O BIPIN KUMAR VILL SATNAPUR POST BAHADURGANJ DISTT GHAZIPUR UP 275201 | BAHADURGANJ | GHAZIPUR | UTTAR PRADESH | 275201 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹32.7 L+₹1.8 L (5.75%)Rejected-Finance 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹32.9 L+₹2.0 L (6.50%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹33.3 L+₹2.4 L (7.79%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹37.5 L
EMD Value
₹75,000
Closing Date
28 Apr 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 Sardar Patel Marg, Lucknow Cantt-226002
SPECIAL REPAIR TO BLDG NO T-97 (08 ORs MD ACCN) AT USMAN ROAD UNDER GE (WEST) LUCKNOW
2022_MES_517160_1
GE/W/WLKO/09 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Lucknow
As Per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹75,000
Yes
7 Jun 2022
7 Apr 2022
30 Apr 2022
7 Apr 2022
28 Apr 2022
21 Apr 2022
7 Apr 2022 - 14 Apr 2022
60 days
Amount
Demolition of cement concrete (unreinforced) in ground floor or pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.
Demolition of cement concrete (reinforced) such as beam, roof, shelves, manhole cover, chajjas and similar suspended work complete all as specified and directed.
Demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified and directed.
Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
M & L Brick work, with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls built in CM. 1:4 using old size brick complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Material and Labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed..
Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid seprately.)
M & L for rendering 10 mm thick in CM 1:3 on concrete surface and finishing the surface even and smooth without using extra cement as on ceiling complete all as specified and directed.
Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.
Material and Labour for preparation newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Material and Labour for preparing new plastered surface of walls and applying two coats of distemper oil emulsion over a coat of primer and over a coat of wall care putty 1mm thick complete all as specified and directed.
Material and Labour for preparing newly plastered surface of ceiling & applying three coats of white wash complete all as specified and directed.
Material and Labour for preparing old plastered surface of ceiling & applying two coats of white wash complete all as specified and directed.
Material and Labour for complete removal of existing surface including preparing old treated surfaces of walls and applying two coats of distemper oil emulsion over a coat of wall care putty 1mm thick complete all as specified and directed.
Material and Labour for complete removal of existing surface including preparation old treated surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified.
Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L Pressed steel door frame of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc completeas specified and directed.
M&L Pressed steel door frame of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed.
M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete as specified and directed.
S&F 35mm thick 2nd class hard wood glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a)supplied and fitted to chowkhats all as specified.
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F powder coated (thickness of powder coating not less than 50 micron) Anodised Aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.
S&F powder coated (thickness of powder coating not less than 50 micron) anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified and directed.
S&F factory made Solid PVC door frame of size 50mmx47mm made out of made out of 5mm plain colour PVC sheet reinforced with 19mm M.S. Square tube of 19 gauge and fixed with 100x8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.)
S&F factory made solid panel PVC door shutter 28mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in frame at site as per specification & drawing complete all as specified and directed.
S & F stainless steel Butt hinges "medium weight" steel 100mm size all as specified and directed.
S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.
S & F extruded alumunium alloy handles fabricated type anodised 125mm long complete all as specified and directed.
S & F Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm long complete all as specified and directed.
S & F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pan complete all as specified.and directed.
S & F 4 mm thick figured sheet glass pin headed and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pan complete all as specified.and directed.
S & F 300 mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed.
S&F Stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed.
Material and Labour for Cutting chases, pining in making to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 20 cm girth in brick walls etc complete all as specified and directed.
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair Stop valves, cast copper alloy fancy type, chromium plated with long shank and cup (concealed type),screwed down high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.
Supply and Fixing in repair PVC connection pipe 15mm bore, 450mm long with PTMT nuts complete all as specified and directed.
Supply and Fixing in repair long body CP bib taps, 15mm bore, fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified.
Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply & Fixing in repair CP shower rose fancy type125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed.
Supply and Fixing in repairs rotational moulded triple layered white coloured polyethylene water storage tank, cylindrical, hoisted & fixed in position all as specified, capacity 500 ltrs including dismantling old water tanks of same capacity complete all as specified and directed.
Supply and Fixing 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball and fixed complete all as specified and directed.
S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and directed.
Supply and Fixing in repair vitreous china squatting pan, Orissa pattern, long pan size 580 x 440mm with 'P' or 'S' trap with integral foot rest & fixing incl making good floor to match complete all as specified and directed.
S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make : Jaguar Cat No 7771 or equivalent of Marc/ESS
Supply and Fixing in repair CP brass tubular towel rail 20 mm dia 'D' type, 60 cm long between flange complete all as specified and directed.
S & F in repair Glass corner self fancy type 250x250 and 10mm thick fixed its brass bracket and screwed complete all as specified and directed. Make : Jaguar Cat No 7771 or equivalent of Marc/ESS
Supply & Fixing in repair sink without drainage board size 560x410x200 mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed.
Supply and Fixing in repair 25mm dia fancy type drapery curtain rod made out of stainless steel side brackets and other necessary fittings complete all as specified and directed.
Supply and Fixing in repair WHB vitreous China white flat back size 550 x 400mm incl brackets, brass CP waste coupling and PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed
S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed
S&F in repairs PVC (SWR) bends of any radius, suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.
S&F in repairs PVC (SWR) bends of any radius, suitable for 75mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.
S&F PVC (SWR) branch piece, single (single Y), equal or unequal suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.
S&F PVC (SWR) branch piece, single (single Y), equal or unequal suitable for 75mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.
S&F PVC (SWR) vent cowls suitable for 110mm bore pipes complete all as specified and directed.
S&F PVC (SWR) vent cowls suitable for 75mm bore pipes complete all as specified and directed.
Supply and fixed in repair 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
M&L providing and injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. in apron complete all as specified and directed.
Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 15 mm thick screed bed in cement morter (1:6) complete all as specified and directed.
Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting etc set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick screed bed in cement morter (1:4) complete all as specified and directed.
Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 15 mm thick screed bed in cement morter (1:6) complete all as specified and directed.
Material and Labour for coloured glazed ceramic tiles 450 x 350 x 7mm thick on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM (1:4) complete all as specified and directed.
M & L for Machine cut kota stone slab 20-25mm thick in risers of steps, skirting, dado and pillar etc over and including 10 mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry and pointed in grey cement mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.
M & L for Machine cut kota stone slab 20-25mm thick in floors over cement screed base 15mm thick in cement mortar 1:6 laid and jointed with grey cement slurry and pointed in grey cement mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) all as specified and directed..
M&L plain cement concrete cast in situ 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings ,hold fast, lintels upto 1.5 m clear span, shelves, RCC parapets and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed
Material and Labour 8mm dia mild steel TMT bar, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.
M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght,and window cills bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-1 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.
S&F kitchen PVC cabinet in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick PVC sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirementand as per make and specification mentioned as per drawing and all as specified and directed by Engineer-in-charge on site.
S & F auto concealed hinges SS size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed
S&F ball catches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed.
S&F 100mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.
M&L plain Cement Concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as in filling in pressed steel frames complete all as specified and directed.
M & L for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of aluminium paint @ 0.10 litre/Sqm (each coat) on membrane surface all as specified and directed. Note :- PCC padding or rendering shall be measured and paid seperately for filling dipression on roof surface. Wherever PCC padding is provided rendering shall not be provided.
Taking down existing water proofing treatment and cleaning floor surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. M & L for providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface.
M&L 10mm thick screed bed or bedding layer in CM 1:4 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with 3% integral water proofing compound complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate. (ii) Wherever screed bed shall be provided, PCC padding shall not be provided.
M&L PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs /benching or mud stops, rounded,chamfered on edges including necessary use and waste of form work etc complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per item no 94 above but for one 5 pin 5 Amp socket outlet point on an independent board.
All as per item no 94 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per item no 94 above but for one Call bell / buzzer point controlled by one bell push
All as per item no 94 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.
S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.
S&F bell push single pole one way 5 Amp 230 volts complete all as specified and directed.
S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.
S&F Call bell (Ding dong) AC single pole 230 Volts complete all as specified and as directed at site.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed at site.
S&F double door VTPN 4 way double door suitable for 4 pole MCCB 63-100A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed by Engr-in-charge. ( Note: MCCB & MCB to be measured and paid seprately) Make: Legrand/Hager/Schneider
S&F MCCB 63-100 Amps 415 volts, 4 pole 16 KA breaking capacity complete as directed. Make: Legrand/Hager/Schneider
S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole & neutral 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
Supply and fixing modular type AC box with socket plug top and MCBs with four pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified. Make: ABB/Havells/C & S.
M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
M&L for two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW
S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or / Havells decorative model Floretine WL 1LS B22 SS PPCP cat no LHFOAJE1TN1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)
S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat noBRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt LED cat no ENXT P 24L WH CR PC SD/ Eveready Mini might cat no LED SL025157-02
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code : WT140W LED7S NW PSU S1 PC./ Bajaj wee plus cat no BIBWP 6W LED
Supply and fixing in repairs LED lamp 9 watt, complete all as specified and as directed.Make: HAVELLS with cat Part No. LHLDEUEEML8R007,Make: Surya with cat Part No.9 W NEO MAX LED LAMP ,Make: C&S Chandra Series with cat Part No.LTHPLEDLAMP7WB22BULB
S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs to operate on 230 volt AC, 2000 watt vertical type including 2/4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed. Make:- Usha Misty/Racold CDR DLX/ Bajaj Montage/ Havells Monja DX NOTE:- Product must have 2 years warranty on heating element & 5 years warranty on inner tank.
S & F of ceiling fan 1200 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed. Make:- Havells ES 40 /Usha Technix plus/Orient energy star
S&F heavy duty metal body exhaust fan 300mm sweep, copper wound, AC single phase, 230/240 volts, fancy type complete with fan motor, blade, bracket, ring and louvers including and provn of grouting 4 nos anchor bolts with nut and washer and making good to disturbed surfaces to match the existing and provn of connection with with three core flexible copper wire cable of size 0.75sqmm from ceiling rose to fan complete all as specified and directed. Make: Orient (Heavy duty) / Usha (Turbo heavy duty metal body)/ Havells (Turbo Force HP)/ Khaitan (heavy duty metal body).
Taking down carefully electric meter of any capacity from wall or any position by disconnecting all connection and refixing the same including all electric connection and acessories as required including new wooden board of suitable size complete all as specified and directed.
Supply and fixing exhaust/fresh air fan 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed. Make: Crompton Ventilus /Havells Ventil Air Dx / Usha Crisp Air Lx
Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 25 Sq mm 4 core stranded conductor nominal cross section all as directed by Engr - in - Charge.
Excavating in trenches in soft/loose soil n.exc 1.5m wide and n. exc. 1.5m depth for foundation etc. and getting out in soft/ loose soil complete all as specified and directed.
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.
Removing surplus excavated material soils exc 50m but n. exc 100m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M & L for sand cushioning to under ground cable 8cm deep before laying and 15cm deep after laying cable complete all as specified and directed
Supply and laying of sub class 'B' bricks old size laid flat over the cable as protection of cable complete all as specified and directed.
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .