C/O Health Institute level-II (PHC) with Doctors residence at Deori Khanety, Tehsil Kotkhai, Distt. Shimla, H.P.

Amount

Cutting in earth work in all heights and depths in heights and depths, in all kinds of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling and wedging out of rock (where blasting is prohibited) including cutting and trimming of side slopes and disposing of excavated earth lift upto all heights and all leads as directed by the Engineer-in-Charge, in conformity with the requirement of technical specification of rural roads clause 1603.1. Minimum quantity of useful material such as stones, shingles, aggregates and slates etc. i.e 260.87 cubic metre, shall be sorted out and stacked along the road side properly, otherwise recovery @ Rs. 170/- per cubic metre shall be effected from the bills of the contractor. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases.

Excavation in foundation trenches etc. earth work in all heights and depths in all kinds of soil, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiselling and wedging out of rocks (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site., according to the HP.PWD. specification 1990 (One thousand Nine hundred Ninety) volume-I (One) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanucal means along with its leveling fine dressing and with all kinds of labour (if required). All useful material such as stones, shingles and slates shall be properly stacked at site other wise recovery to the maximum possible extent in all lesds and lifts through all modes of transportation and sued/removed as per the direction of the Engineer-in-Charge. Any loss to the public and private properity during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in drain and channels in all heights and depths in all kinds of soil, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiselling and wedging out of rocks (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site., according to the HP.PWD. specification 1990 (One thousand Nine hundred Ninety) volume-I (One) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanucal means along with its leveling fine dressing and with all kinds of labour (if required). All useful material such as stones, shingles and slates shall be properly stacked at site other wise recovery to the maximum possible extent in all lesds and lifts through all modes of transportation and sued/removed as per the direction of the Engineer-in-Charge. Any loss to the public and private properity during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Foundation, footing basis of columns etc and mass concrete.

Columns, Pillars, Posts and struts. Square rectangular or polygonal in plan.

Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 Mtr. In depth in all heights from floor.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floor upto 200 mm in thickness up to floor all level

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Stair cases with sloping or stepped of soffits excluding landing

Edges of slabs and breaks in floors and walls. up to floor all level.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete including cost of form work in foundation and plinth. including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete including cost of form work in foundation and plinth. including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete including cost of form work in foundation and plinth. including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. Moulder as in cornices,window sill etc.Not exceeding 15 cm in girth.

Providing and laying mechanically mixed and vibrated cement concrete 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) mixed with bibrated mechanically so as to give a compressive strength corresponding to grade M-20 and curing completed excluding cost of form work and re-inforcement for reinforced concrete work in all floor height and carriage of material in all leads and lifts. including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Foundations, footings, basis of columns and the like and mass concrete

Column pillars post and struts up to floor two level.

Suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers up to floor all levels

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Stair cases except spiral staircases excluding landing but including preparing of top surface and finishing of nosing up to floor all levels

Providing mild / tor steel reinforced cement for RCC. Work including bending binding and placing in position complete up to floor all level. including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Brick work using common brunt clay building 2nd class conventional bricks in cement mortar 1:3 (1 cement :3 sand) super structure above plinth level and up to floor two level including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Brick work using common brunt clay building 2nd class conventional bricks in cement mortar 1:6 (1 cement :6 sand) super structure above plinth level and up to floor two level including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Half brick masonry in common brunt clay building 2nd class conventional bricks in cement mortar 1:4 (1 cement :4 sand) super structure above plinth level and up to floor two level including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Supplying cast iron cover without frame for main hold A) for frame of internal dimension 455 mm x 610 mm rectangular C.I cover (light duty single seal pattern -I ) the weight of cover to be not less than 23 kg. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and layinf filter media with granular material behind retaining wall/breast wall as per specification 1204.3.8 jin a width of 600mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications of clauses 702,704,1202 and 1203. Square Rubble masonry in cement mortar 1:6 including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying in weep holes of retaining walls/ breast walls 100mm dia PVC(D-Plast) pipes of working pressure not less than 4.5 Kg per sqm. as per drawing and H.P.P.W.D. technical specifications. including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position in 2nd class deodar wood including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame. sq.m and as per direction of Engineer-in-charge.

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 40mm thik with 2nd class deodar wood including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing brass curtainrail with rollers stop ends and brackets in pelmets instead ofwooden curtain rod 25 mm dia andbrackets of first class deodarwood (actuallenght) of rails of be measured. and as per direction of Engineer-in-charge.

Providing and fixing wire gauge shutters using galvanised M.S. gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors and windows : 40 mm thick 2nd class deodar wood including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing 40x3 mm flat iron holdfast 40cm. Long including fixing to frame with 10mm diameter bolts & nutsand wooden plugs and embeding incement concrete block30x10x15cm. 1:3:6 ( 1 cement : 3 sand:6 graded stone aggregate 20mmnominal size)as per direction of Engineer-in-charge.

Providing and fixing 19mm thick commercial water proof shutter for cup board including fixing with nickle plated piano hinges with screws etc complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing M.S. grills of required pattern in steel frame of windows etc. with M.S. flats, square or round bars with round headed bolts and nuts or by screws : Plain grills including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing 0.60mm thickprepainted steel sheet in roofing withhot dipped metallic zinc coated sheetwith top coat of regular modifiedpolyster (RNP) organic coating of 20microns over 5 microns primercoating to back coat of polyster of 5microns over 5 microns primercoating i/c fixing with prepainted iron Jor L hooks, bolts and nuts 6mm diametre with prepainted limpet andrubber washers complete with allaccesoriees as required as per thedirection of Engineer-in-charge.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing withhot dipped metalic zinc coated sheetswith top coat of regular modifiedpolyster organic coating of 20 micronsover 5 microns primer coating + backcoat of polyster of 5 microns over 5microns primer coating i/c fixing withprepainted iron J or L hooks, bolts &nuts 6mm dia & prepainted G.I. limpetand bitumen washers complete withall accessories as required as per the direction of Engineer in Charges

Providing and fixing valley 60 cmoverall 0.60mm thick prepainted steelsheet in roofing with hot dippedmetalic zinc coated sheet with topcoat of regular modified polysterorganic coating of back coat of polyster of 5 microns over 5 micronsprimer coating i/c fixing with prepainted iron J or L hooks, bolts andnuts 6mm dia with prepainted G.I.limpet and bitumen washers completewith all accessories asrequired as perthe direction of Engineer-in-charge

Providing and fixing flushing 38cmoverall with 0.60mm thick prepaintedsheet in roofing with hot dippedmetalic zinc coated sheet with topcoat of regular modified polysterorganic coating of 20 microns over 5microns primer coating + back coat ofpolyster of 5 microns over 5 micronsprimer coating i/c fixing withprepainted iron J or L hooks, bolts andnuts 6mm dia meter & prepainted G.I.limpet & bitumen washers completewith all accessories as required as per the direction of Engineer-in-Charge.

Providing and fixing 15 cm.wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. includingmaking necessary conections with rain water pipe complete as perdesign.63mm thick. completewith all accessories as required as perthe direction of Engineer-in-Charge.

Supplying and fixing glasspanes with putty and nailsincludinremoval of brokenglass panes wherevernecessary:-Plate Glass5.5mm thick. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing square edgescover fillets (beading) 19mmx6mm section i/c mitring at junctions withwood screws and nails complete 1st class deodar wood. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. 2nd class deodar wood.

Providing 50x50x50mm woodenplugs including cutting bricks/stone work and fixing in cement mortar 1:3(1 cement : 3 sand) and making good the walls etc.2nd class deodar wood. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing anodized aluminium sliding door bolts anodized to required colour and shade and screws etc. including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing anodized aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with necessary screws etc. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

200 X 10mm size

100 X 10mm size

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete. including carriage of materials in all leads and lifts and as per directions of Engineer – in – Charge complete

Providing & fixing oxidized M.S hasps and stapples (safety type)with necessary screws including carriage of materials in all leads and lifts as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing MS single acting spring hinges bright finished with necessary screws etc complete. 150 mm including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing & fixing 100 mm bright finished Aluinium floor door stopper with rubber cushion screws etc. to suit shutter thicknesscomplete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. -

Providing and fixing bright finished hard drawn hooks and eyes.200mm complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing bright finished brass ball catcher 10 mm dia complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Precast terrazzo tiles hydraulic compressed 20 mm thick withmarble chips of specifiedsizes laid in floors, treads ofsteps and landings on a bed of 25mm average thickness of cementmortar 1:6 (1 cement :6 sand)jointed with neat cement slurrymixed with pigment to match theshade of tiles (wherever required)incliding rubbing and polishing complete with tiles of following shades:-white

Precast terrazzo tiles hydraulic compressed 20 mm thick withmarble chips of specifiedsizes laid in floors, treads ofsteps and landings on a bed of 25mm average thickness of cementmortar 1:3 (1 cement :3sand)jointed with neat cement slurrymixed with pigment to match theshade of tiles (wherever required)incliding rubbing and polishing complete with tiles of following shades:- complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. white

White glazed tiles 6 mm thick inskirting risers of steps and dado12 mm thick cement mortar 1:3(1 cement :3 sand) and jointed with cement slurry. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

(Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand)including jointing with cementmortar 1:2(1 white cement:2 marbledust) with an admixure of pigment to match the shade of the marble. 20 mm thick White makrana marble. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Cement concrete flooring 1:2:4 (1cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. 40 mm thick

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third & fifth courses of blown or resideual bitumen applied at 1.45 kg 1.20 and 1.45 kg persq.mof area respectively second and fourth course of roofing felt type 3 grade (hessain bese finished bitumen felt ) sixth and final course of stone girt 6 mm and down size or pea sized gravel spread at 6 cu.dm or (0.006 cu.m) per sq.m including preparation of surface excluding grading complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing embeding sand cast iron water 100 mm dia rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesivecomplete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. 100 mm dia

Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cement :2 sand) complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

C.I plain bend. 100 mm diametre

C.I.head flat or corner type bend

C.I. branch (plain)

Providiing lesd caulked joints to sand cast/cast iron(spun)iron pipes fittings including testing of joints including carriage of material within all leads and lifts and as per a)100 mm(one hundred millimetres dia) complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Steel work welded in built upsections,trusses and framed work,including cutting ,hoistingfixing in position and applying a priming coat of red lead paint.In trusses and trussed purlins in buildings. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

In gratings framed guardbars,ladders,railling,brackets and similar works complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing in positioncollapsible steel shutters with vertical channels 20 mm X10 mmX2mmand braced with flat irondiagonals20 mm X5 mm size with top andbottom rails of T.iron 40 mm X40 mmX6 mm with 38 mm dia steel pulleycomplete with bolts and nutslocking arrangements,stoppers,handles,including applyinga priming coat of red lead paint.

Providing and fixing mouldedhand rail of M.S. hollow pipe welded in straightlenght over M.S. flat at top of vertical balusters including onecoat of red oxide priming coat complete (M.S. flat & balustersof railings shall be mesaured & paid separetely. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing M.S.roundholding down or anchor bolts with nuts and washer plates complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Applying priming coat on externalsurface of new rain water soil waste and fittings with readymixedpriming paint brushing red lead including preparing the surface bythoroughly cleaning oil grease dirt,and other foreign matter andscoured with wire brushes,fine steel wool scrapers and sand paper 100 mm dia complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Painting two coats (excludingpriming coat)on external faces of new rain water soil,waste and ventpipes and fitting with aluminium paint,brushing to give an evenshade including cleaning of all dirt,dust and other foreign matter complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Wall painting (two coats) with acrylicemulsion paint of approved brand andmanufacture for interior grade on undecorated concrete/stone/plastered wallsurfaces to give an even shadeincluding t horoughly brushing thesurface free from mortar droppingand other foreign matter and sandpapered smooth including applying ofputty a required for metling the surface complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Finishing wall with weather proofexterior grade emulsion ofapproved design (Apexultima) or its equarliedon undecorated wall surfaces (twocoats) to give an even shade and final finish after throughly cleaning thesurface to remove all dirt, dust andother foreign matter etc includingsand paper smooth complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

6mm cement plaster to ceiling in cement mortar 1:4 (1 cement : 4 sand) including carriage of materials within all leads and lifts in all floor levels complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. Cement mortar 1:6 (1 cement : 6 sand)

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal / external rounded angles, chamfers and/or rounded angles not exceeding 80cm in girth and finished even and smooth .Cement mortar 1:3 (1 cement : 3 sand) complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal / external rounded angles, chamfers and/or rounded angles not exceeding 80cm in girth and finished even and smooth .Cement mortar 1:6 (1 cement : 6 sand) complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

20mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal / external rounded angles, chamfers and/or rounded angles not exceeding 80cm in girth and finished even and smooth .Cement mortar 1:6 (1 cement : 6 sand) complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

White washing with lime on undecorated ceilling surface (two or more coats) to give and even shade including thoroughly brooming the surface to remove all dirt, dust, mortar and other foreign matter including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel white paint including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and including preparing, the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting Ready mixed brushing wood primer pink including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Painting two costs (excludingpriming cost on new steel and other metal surfaces eith enamel paintbrushin to give an even shade including cleaning the surface ofall dirt,dust and other foregin matters :-- complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. Enamel white paint

Providing under layer for plinth protection of 75mm thick (un-consolidated) bed of dry brick/ stone aggregate 40mm nominal size well rammed and consolidated, grouted with fine sand including preparation of ground including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 ( 1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) including curing and finishing the top surface of the concrete smooth including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying trenches galvanised mild steel tubes (Medium grade), tube fittings (Earth work in tranches to be measured and paid for separately)25 mm nominal bore : complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. -

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade)tube fittings and clamps including making good the wall ceiling and floor including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete. 20mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Making connection of GMS steel distributuiion branch with GMS tube 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing P.V.C storage tank complete with 40mm (forty millimetres) nominal bore galvanised mild steel over flow tubes with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen millimetres) nominal bore ball valve and mosquito proof galvanised mild steel cover with locking arrangements including providing pads of sizes as required for inlet and out let tubes 1000 litters ( One thousand litters) net capacities storage tankcomplete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing sand cast iron spigot and socket waste siol waste and ventillating pipe lead caulked including fixing with approved adhasive etc complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

100mm dia

75mm dia

Providing and fixing sand cast iron pipe fitting including testing of joints complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

100mm dia

75mm dia

Providing and fixing single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

100 mm dia

75 mm dia

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete

100 mm dia

75 mm dia

Providing and fixing single equal branch plain ISI marked including fixing with approved adhesive etc complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

100 mm dia

75 mm dia

P/F M.S stay and clamps for C.I pipes. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Offset with 76mm projection complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing plain bends complete in all respect including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

100 mm dia

75mm dia

Providing and fixing double equal branch with access door complete in all respect including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

100 mm dia

75mm dia

Providing and fixing collers complete in all respect including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

100 mm dia

75mm dia

Providing and fixing cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the wall and floors including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing 100 mm dia Cast iron cowl including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing 100 mm dia C.I grating for gully trap including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing viterious china water closet squatting pain Indian type W.C. pain of approved make and shade and size 580mm ( earth work, bed concrete, foot rest and trap to be measured and paid for separately) Indian type including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing sand cast iron 100mm size P or S trap for water closet (squatting pan) including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and coveto be paid for separately. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing PTMT coloured/white high density polythene 10.00 ltr.capacity(full flush) european standred control low level flushing cistern with a pair of brackets with fittings such as lead valve, less syphon, 15mm nominal size PVC ball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40 mm dia PVC flush bend with cistern and closet & over flow pipe to be paid for separately) complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing first quality of white shade viterous China bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp(waste pipe to be measured and paid for separately) including carriage of materials within all leads and lifts :-(Flat back type size 430x260x350mm)

Providing and fixing 5 ltrs PTMT low level flushing cistern with a pair of C.I. or mild steel brackets complete with fittings such as lead valve less syphon 15mm (fifteen milli metre) nominal size brash wall valve with polythene float C.P. brass handles, unions and couplings for connection with inlet, outlet complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing .C.P brass flush pipe/ spreaders for urinal with all fittings in C.P.brass including cutting hole and making goog the same complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing G.I.inlet connection for flush pipe with W.C.pan complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing stainless steel wash basin with single hole for pillar tap with C.I.or M.S. brackets painted white including cutting holes and making good the same but excluding fittings : Flat back 610mm x 450 mm bore complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing stain less steel sink with single hole for pillar tap with C.I.or M.S. brackets painted white including cutting holes and making good the same but excluding fittings : Flat back 680mm x 450 mm bore complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing CP brass waste for wash basin or sink 32mm dia including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing M.I. union for wash basin or sink 32mm dia including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing P{VC waste pipe for wash basin and sink 20mm dia 45 cm all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing 600 X 450 mm (six hundred into four hundred fifty millimetres) bevelled edge mirror of superior glass mounted on 6mm (six millimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing charomium plated brass towel rail with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete. 600x20mm including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing charomium plated.brass soap dish complete fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing toilet paper holder including carriage of materials within all leads and lifts :-C.P. brass :- complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing stop cock of Prayag with flange of approved quality and colour 15mm dia.

Providing and fixing C.P. brass bib tap of approved make with capstan head 15mm ( fifteen millimetres ) dia including carriage of materials in all leads and lifts as per direction of Engineer – in – Charge complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing 15 mm mixer for kitchen simk with top / bottem swinging spout complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing brass full way valve with wheel complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. - 15 mm

Providing and laying to (level or slope ) and jointg with stiff mixture of cement mortar 1:1 ( 1 cement :1 sand ) 1) stoneware pipe grading A 2) 250 mm nominal dia

Providng and fixing C.P steel grating for wash basin an sink including carriage of material witjin all leads and lift by all means & other including carriage of material within all leads and lift incident 1) complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge. 100 mm dia

Providng and fixing rubber plug for sink and wash wash basin of 32 mm including carriage of material within all leads and lift

Cutting chase in stone /brick masonry walls for fixing sand cast iron /cast iron spun pipes and fifting i/c making good the same with stone / brick work in cement 1:3 (1 cement :3 sand ) including carriage of material within all leads and lift by all means & other incidentals. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

75 mm nominal size

100 mm nominal size

P/F Vetrious china division plate for urinal 600 x 330 complete in all respect including carriage of material in all leads and lift complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

P/F extension piece of G.I pipes 1) 15 mm. complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing Vitreous China padestal for wash basin complete recessed at the back for receiption pipe anf fittings. . complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

P/F to wall , celling and floor polythenal Aluminium polythen composite pressure pipe IS 15450 2004 of kitech or ots equivlent , tube fiiting including carriage of material within all leads and lift . 15 mm nominal bore

Providing and fixing C.P. brass pillar tap of approved make capstan head 15mm ( fifteen millimetres ) dia complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing C.P. stop cocks : of approved make 15mm ( fifteen millimetres ) dia complete including carriage of material within all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Pankaj Chauhan

Akshay Dhillon