New construction of cremation ground soil filling construction work of cremation ground in village Garhi Kataiya.

Cleaning jungle including of rank vegetation, grass,bush wood,trees and samplings of girth up to 30cm measured at heigt of 1m above ground level and remval of rubbish uoto a distance of 50moutside the peripherry of the area cleared D.S.R 2.31

Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well as 10sqm on plan including getting out and disposal of excavated earth upto 50m and lift upto 1.5m,as directed by Engineer Incharge in cartage DSR 2.8.1.

P/Laying IN position cement concrete of 1:4:8 ( 1cement:4coarse sand: 8 graded stone aggrgate 40mm nominal size derved from natural sourse DSR NO 4.1.8.

Brick work with common burnt clay (non modular) bricks of class desination 7.5 in foundation in cement mortar 1:4( 1 cement :4 coarse sand ) DSR NO6.1.1

Reinforced cement concrete work in beams, suspended floors ,roofs, having slope upto 15 degree landing, balconies, shelves, chajjas , lintels bands.plain window sills, above plinth level.upto floor level five .excluding the cost of centering and shuttering,finishing and reinforcement with 1:1.5:3 drived from natural source DSR N05.3

Steel reinforcement for R C C work including strainthening, cutting, bending,placing in position and binding all complete Fe 500 D .DSR NO 5.22.6

Filling availble excavated earth in trenches ,plinth,sides of foundation etc. in layers not exceeding 20cm in depth consoliding of each deposited layers by ramming and watering lead upto 50m lead and cartage 8th km DSR 2.25+1.1.2

Construction Of Granular Sub Base By Providing well Graded Material Spreading In Uniform Layers With Tractor mount Grader On Prepared Surface, Mixing by Mix In Place Method Tractor With Rotavator at OMC, and Compacting With Three wheel 80-100 KN Static Roller To Achieve The Desire Density, Complete as per Clause 401. As per MORD Analysis.

Supply of 80 mm thick precast cement concrete I shape / Zigzag interlocking paver blocks confirming to IS Code: 15658-2006 with top layer of minimum 8mm thickness having plan dimension 200mm x (160mm +120mm) with minimum 5mm thick topping of O.P. cement, smooth high gloss finish, skid resistant, manufatured from rubber molds vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 30 Mpa (M- 30) and weight 5.00 Kg per No. including cost of material and with a blanket layer of 4 cm thick fine sand, labour, tools and Plants etc. requared for proper complition of the work directed by the Engineer-in-incharge. S.I.No. New Item (i) Grey colour

12 mm thick plaster over wall of 1:4 cement & coarse sand mortar over even surface including supply of all materials, labour and T&P etc. as per DSR NO13.4.1

Cutting groove in plaster 1 cm wide and 1 cm deep by using special tools including supply of all material, labour, tools and plants etc required for proper completion of the work.S.I.No-21.20 New Item

Providing wall putty 1mm thick over new surface of approved quality and brand like Berger/j.k./Birla or similar two coats as per DSR 13.80.

Finishing of wall with two coat of water proofing cement paint of approved quality and make as per DSR NO13.45.1.

steel work in builtup tubular(round,square or rectangular hollow tubesetc) trussesetc. Inclding cutting,hoisting,fixing in position and applying a prming coat of approved steel primer.including welding and bolted with special shaped washer etc.complete DSR NO 10.16.1

painting Steel work with Deluxe multi suface paint to give an evenshade.two or more coat applied @0.9ltr/10sqm over an under coat of primer applied @0.8ltr/10sqm of approved brand and manufacture DSR NO 13.48.3

providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks,bolts and nuts 8mm diametre with bitumen and G I. limpet washer filled with white lead, including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete vertical or curved surfaces, excluding the cost of purlin rafters and trusses and including cutting to size and shape wherever required. 1mm thick with zink coating not less than 275gm/m2. DSR NO 12.1.2

providing ridge hips of width 60cm over all width plain G S. sheet fixed with polymer coated Jor L hooks.bolts and nuts 8mm dia G.I. limpet and bitumen washesrs complete. DSR NO 12.4.1

Supply and fixing of M.S sign board.of prescribed size 1.20m *2.75 m with angle 40*40*6 mm iron angle and 1 mm thick ms iron sheet including painting and letter writing complete.approved rate as per S.E.R.E.D. Meerut.

Deduction-5% for Competitive Price Efficiency

Add GST 18% Rs