Maintenance and Repairs of Subordinate Quarter no.3 at Sidlaghatta Town ,Chikkaballapur Dist. (Others Category)

Maintenance and Repairs of Subordinate Quarter no.3 at Sidlaghatta Town ,Chikkaballapur Dist.

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- including the cost and conveyance of all materials, Curing, cost of labour hi...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per direction...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and ...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and ...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm ---- including the cost and conveyance of all ma...

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm ---- including the cost and conveyance of all materials...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...

Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and...

Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 122mm long, weighing not less than 99 g ---- including the cost and conveyance of all materials, Curing, cost of...

Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- including the cost a...

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- including the cost and conveyance of all mat...

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 20 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hire charge...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges a...

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations inclu...

Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs,Machine/NF...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -6A One Way Switch (PWD Electrical SR 2023-24 Volume-6 Item No: 3.6.1 P.No.9...