Construction of Barracks building with 50 Nos. of Bed with development works for Armed Reserve Police at AR Kakuppam in Villupuram District.

Amount

E0001: Earth work excavation for foundation in all soils (including refilling) a) 0 to 2m depth.

E0003: Earth work excavation in Soft disintegrated rock (including refilling) a) 0 to 2m depth.

E0005: Earth work excavation for Open Foundation (Excluding Refilling). a) 0 to 2m depth.

E0006: Earth work excavation for Open Foundation for drains in all soils (Excluding Refilling) a) 0 to 2m depth.

RE0006: Providing Pre-Constructional Antitermite treatment

F0040: Supplying and filling in foundation and basement with filling crushed stone sand

F0006: Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials

F0007: Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials

F0026: Filling in foundation and basement and other similar works with Excavated earth

F0015: Supply and filling in foundation and basement with Stone dust (sand and stone dust mixed in the ratio of 1:1) in layers of not more than 10cm thick

F0013: Supply and filling in foundation and basement with gravel

F0043: supplying of 3 to 10mm size HBSJ including conveyance and cost of materials etc

FL0115: Supplying and laying of Rubber molded hydraulic pressed Paver blocks following thick using stone dust with required design & color including cost, conveyance of paver block and labour charges for laying with proper slope and gradient etc b.83mm thick Paver block

CSMP0002: Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer

CSMP0003: Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly)

CSMP0004: Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer

CS0037: supplying and fixing of precast cement concrete slab for cupboard/ward robes shelves, cover slab for chambers, baffle walls side slabs of boxing around windows and other similar works in standardised concrete mix M-20 grade II. 40mm thick a. In In Foundation & Basement

C0065: Providing and Laying in position, standardised concrete mix m-20 grade a. In Foundation and Basement

b. In Stilt/ Ground Floor

c. In First Floor

d. In Second Floor

C0055: Supplying and fixing Monolithic RCC door frames of size 100x75mm with one edge groove size t x 20 mm (t represents the shutter thickness) using standardised Concrete mix M20 without vibrating including cost of steel and fabrication of reinforcement grills a. 1000 x 2100 mm

CSMP0001: Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 used including cost of all materials, moulding, curing, transportation, laying, pointing etc., for approach road,pavement slab and other similar works etc.,

BMP0010 : Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floors b. In Ground Floor

c. In First Floor

BMP0011: Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement

BMP0012: Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors b. In Ground Floor/Stilt floor

c. In First Floor

d. In Second Floor

BMP0013: Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b. In Ground Floor/Stilt floor

c. In First floor

BMP0014 :Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors b. In Ground Floor/Stilt floor

c. In First floor

d. In Second floor

FLMP0001: Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002: Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024: Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

FL0025: Weathering course with concrete broken brick jelly 20mm gauge

FLMP0004: Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005: Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006: Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0010: Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) in cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011:Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0154 : Providing water proofing treatment for the toilet sunken portion with epoxy coat as per the following specification: Surface Preparation: Cleaning and preparation of surface with the help of wire brush. Wash the roof with clean water. Repair and fill cracks. Water proof Coating: Providing and applying 2 coats of acrylic polymer modified cementitious coating Dr.Fixit Pidifin 2K of M/s.Pidilite Industries having elongation at break 50%; 5 Bar resistance to positive water pressure, Adhesive Strength ASTM D 7234-1 N/mm2, and Crack bridging ability two coats coat to dry for 6 to 8 hours.

FW0004: Providing Form work and centering for reinforced cement concrete works a. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c.For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d.For vertical walls (sump)

f.Curved surface

PLMP0001: Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002: Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003: Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0004: Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

PLMP0005: Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0022: Painting the new wood work with two coats of approved first class synthetic enamel

PA0026: Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0032: Supplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037: Painting two coats with ready mixed PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade including a priming coat on cement

PA0042: Painting two coats with ready mixed EXTERIOR EMULSION PAINT

PA0037.a: Painting the ceiling with one coat plastic emulsion paint incl. primer

PA0027: Providing wooden ( Melamen Door ) Polish for new wood by removing by blade scrapping the exisiting dirt

J0001: Supplying and fixing of Teak Wood wrought and put up for frames of doors a) Teak wood over 2.00 metre and below 3 metre length

b) Teak wood below 2.00 metre length

J0021: Supply and fixing of best approved superior variety Magnetic door catches

JW0007: Supplying and fixing of best Indian Teak wood openable French window of following size having single bay openable with frame made up of TW scantling 75 mm x 37.50 mm (verticals- 2 nos. and horizontals – 2 nos. top & bottom) shutters with styles, glass panels using frosted glass 4 /5.5 mm thick fixed with T.W. beading of size 15 mm x 12 mm including cost of all materials, labour charges for wrought and putup and fixing in position and brass furniture fitting such as 3 nos of 5" butt hinges, 2 Nos of 6"/12 Tower bolt, 1 No handle, 1 No nylon bush and with required Brass screws etc., c) 1.00x1.95m

J0029: Supplying of Mild steel hold fasts horizontally twisted of size 230x40x4mm

JV0022: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators

JW0042: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type

JW0044: Supplying & Fixing in position of UPVC Sliding windows

JD0095: Supply and Fixing of 25mm (+/- 1mm) thick WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is suggested to be hinged to the WPC frame of size 75 x 50mm with minimum of 5 inch butt hinges of SS including cost of WPC door frame, shutter, SS cylindrical lock and door closer and labour charges etc., complete complying with standard specifications and as directed by department officers. (The brand should be got approved from the Executive Engineer before use.)

JD0098: Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters with brass fittings a) Double leaf suitable for door size 1800mm x 2100mm

JD0059: Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size c) 1000 x 2100 mm

GR0001: Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure

RE0005: Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

CS0012: Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard (a) In Ground Floor

(b) In First Floor

CS0015: Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard a. In Ground floor

b. In First floor

JD0094: Providing T.W. double leaf shutters for Cupboard/ward robes with 9mm thick phenol Bonded BWR grade ply wood

FLMP0018: Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6

WS0002: Supplying and fixing of 110mm dia PVC SWR pipe Rain water downfall pipe

MS0050) C.I Steps 5kg

WS0033: Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036: Supplying and fixing of half turn C.P short body Tap of 15mm dia

MS0053) Supplying and fixing of C.I Manhole cover 60 x 60 cm (50 kgweight)

WS0006: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0007: Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line

WS0276: Supplying, laying, fixing and jointing the following PVC pipes as per ASTM a) 20mm ASTM D schedule 40 threaded PVC pipe with necessary UPVC specials

WS0107: Supplying and fixing of 32mm dia PVC Tee with end cap of best approved quality with IS

EL0337: Supplying and delivery of following PVC aluminium armoured LTUGcable (PVC aluminium armoured LTUG 1100v grade) with isi mark including cost of cable and conveying to the site of work etc., all complete and as directed by the departmental officers. [the brand and quality of the UG cable should be got approved from the executive engineer before use]. h). 3.5 core 50 sq.mm.

EL0343: Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip h). 3.5 core 50 sq.mm.

EL0346: Supply and laying of PVC insulated and sheathed following core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor etc., b) 3 core 2.5 sq.mm flat type copper cable

EL0548: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 25 Sq.mm and 2, 3, 3 1/2 , 4 core (AGL)

EL0549: Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level

WS0236: Drilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC a) Upto 150m depth ending below Ground level

b) From 151m upto 180m depth ending below Ground level

c) From 181m upto 210m depth ending from Ground level

d) From 211m upto 240m depth ending from Ground level

e) From 241m upto 250m depth ending from Ground level

WS0162: Labour charges for the erection of three phase Upto 5 HP submersible pumpset in borewell / openwell

WS0265: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply For 3 HP Motor

WS0266: THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply For 5 HP Motor

WS0278: Supply and delivery of clear water vertical wet type submersible pump suitable for 100mm/150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes o. 50 lpm x 175 m

WS0279: Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star q) 100 lpm x 50m

WS0017: Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark including cost and conveyence and fixing in position d) 25mm dia GI Pipe `B` class

WS0020 : Labour charges for the following dia gi pipe below ground level including earth work excavation, cutting, threading, jointing, lowering, laying to proper grade and alignment and refilling the trench with excavated earth etc., c) 25 MM DIA GI PIPE

SA0123: Supplying, laying and jointing the following dia of UPVC Pipes with ISI mark of best approved quality including labour charges for cutting, threading jointing the pipes wherever necessary wrapping the pipes with teflon tape and fixing the same with clamps and screws etc. a. 32mm dia UPVC Pipe

b. 50mm dia UPVC Pipe

WS0234 : Labour charges for the following dia PVC/UPVC pipe below ground level including earth work excavation, cutting, threading, jointing, lowering, laying to proper grade alignment and refilling the trench with excavated earth etc. a) 50MM DIA PVC PIPE

c) 32MM DIA PVC PIPE

WS0018: Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark including cost and conveyence and fixing in position WS0018.X.a. 50mm GM non return valve

WS0018.VI.a : 50mm dia GI Union

WS0018.I.a: 32mm dia GI coupling

WS0018.V.c : 32mm dia GI Elbow

WS0018.VII.c. 32mm dia G.I Hex Nipple

WS0018.X: 32 GM non return valve

WS0018.IX.c : 32mm dia Gun Metal Gate valve

WS0280: Supplying and fixing of following dia UPVC specials of best approved quality including cost of specials and labour charges for fixing etc., WS0280.III.a : 50 mm Dia UNION

WS0280.II.a : 50 mm Dia Tee

WS0280.I.a : 50 mm Dia Elbow

WS0280.IX.a : 50 mm Dia HEX NIPPLE

WS0280.V.a : 50 mm Dia COUPLER

WS0280.I.c : 32 mm Dia Elbow

WS0280.III.c : 32 mm Dia UNION

WS00280.V.c: 32 mm Dia COUPLING

WS0280.X.c : 32 mm Dia MTA

WS0280.XI.c : 32 mm Dia FTA

WS0280.X.a : 50 mm Dia MTA

WS0280.XI.a : 50 mm Dia FTA

WS0280.VII.a :50 mm x 40 mm Dia REDUCER TEE

WS0243: Supplying of following dia UPVC Column pipe for borewell a) 32mm dia UPVC Column Pipe

WS0235: Supply and delivery of nylon rope of best appred quality.

WS0239: supply and erection of 150mm dia of pvc casing pipes (6kg/cm2) without as per is 12818/2010 of approved quality for bore wells

WS0240: supplying and fixing of 160mm dia pvc end cap for borewell casing pipe of approved brand etc., all complete and as directed by the departmental officers (the quality and brand of pvc end cap should be got approved by the executive engineer before use)

NL0006: Supplying and fixing of following size aluminium die casting lettering and numbering with approved coloured powder coated in matt finishing a) 9" dia aluminium dye casting letters

c) 12' dia aluminium dye casting letters

NL0005 : Supplying and fixing in position of following size aluminium diecasting TNPHC Logo / Emblem with approved coloured powder coated in matt finishing including drawing model letters on the paper, preparing the design, moulding, casting, filing, colouring to the requirement by spraying the paint, transporting to site and labour for scaffolding drilling and fixing the letters by using projected rod fevicol quick fix and cement slurry and redoing the damaged area and colouring etc., a) 2' (24") height TNPHC Emblem

NL0007) Supplying and fixing of following size plastic foam plate of 3mm thick with 3' height vinyl cutting numbers with approved colours etc., complete and as directed by the departmental officers. (The quality of the material should be got approved from Executive Engineer before use) d) 18'' x 4" Plastic Foam Plate

MS0058: supplying and delivery of nav-tal 7 levers hardened (4 keys)-7169 (5002) including cost of materials and labour charges for fixing in position etc., all complete and as directed by the departmental officers. (the brand should be got approved by the executive engineer before use in work)

SA0002: Supplying and fixing of Porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm

SA0036: Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type `A` with PVC cowl and relevant specials confirming to IS

SAMP0006: Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 110 mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cm 1:5 (One of cement and five of crushed stone sand) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag

SAMP0003: Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

SAMP0004: Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SAMP0005: Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag). (Other than ground floor)

SA0025: Supplying and fixing EWC superior variety (White) 500mm with PVC SWR grade ‘P’ or ‘S’ trap

SA0031: Supplying and fixing the following dia PVC (SWR) pipe and relevant specials including packing the joints with rubber lubricant a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035: Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048: Supplying, laying and jointing the following dia UPVC Non Pressure pipe a) 110 mm dia UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

SA0053: Supplying and fixing of the following dia PVC Equal Tee as per IS 10124/1982 b) 160 mm dia PVC Equal tee (BIS 7834/1975).

SA0155: Supplying and fixing of CP Two Way Bib Cock with Health Faucet

MS0002: Supplying and fixing of 20mm dia aluminium hanger rods

MS0003: Supplying and fixing of Aluminium Towel Rail of 75cm

MS0006: Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007: Providing and fixing iron Chromium plated 8 gauge Picture hooks

MS0008: supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of size 500x400x5.5mm

L0001: Supplying and planting of Avenue Trees

L0004: Supplying and fixing of Triangular shape chicken mesh Tree Guard using 8cm dia

EL0002: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026: Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034: Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041: Supplying and fixing 15 Amps 3 pin plug type socket with switch

EL0214: EARTHING AND EARTH CONNECTIONS: Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm dia GI pipe

EL0074: Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075: Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0312: Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

EL0078: Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

EL0085: Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI Quality including necessary wall opening, fixing and finishing the wall opening and making good including cost of materials, labour for fixing, chipping and redoing necessary inter connection, scaffolding, hire charges for tools and plants etc.,

EL0070: Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 Watts LED Bulb

EL0047: Supply and fixing of 18 watts LED tube light with fitting of four feet long

EL0252: Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) including cost of materials and labour charges etc., all complete as directed by the departmental officers. (The brand and quality should be got approved by the Executive Engineer before use).

EL0045: Supplying and fixing of water tight bulk head fitting with guard suitable for 12W LED lamp

EL0100: Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode) lower end lamp with heavy gauge aluminium sheet fabricated canopy treated primered and painted with stove enameled CRCA sheet steel contact gear cum reflector tray duly finished glossy white for optimum reflection with clear ribbed acrylic bowl fixed to aluminium frame with gasket lining secured to canopy by means of hinges for one side and foggle a.25W LED Street Light Fitting with LED

EL0298: Supply and fixing of Electro Mechanically Operated Three phase earth leakage circuit breaker/residual current circuit breaker

EL0190: Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191: Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0202: Supply and Run off main with 4 wires of 4 sq.mm PVC insulated single core multi strand fire

EL0174: Supplying and laying of 8 SWG GI wire for earth connection on wall

EL0227: Supplying and fixing 3 nos of 63 amps 500 volts grade

NL0002: Supplying Fabrication and Erection in position of M.S. scheme name and layout board

EL0165 : Supply and fixing of 63 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection,cost of all materials etc.,

EL0434: Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame (Angle iron frame 38 mm x 38 mm x 6 mm) work with MS cable entry boxes with Earth connection only

R.SURESH BABU (BID ID -1513129)

dp constructions (BID ID -1519811)

SSV DEVELOPERS (BID ID -1515957)