12/SE/EWC/AYO/2024-25

Amount

Safe Loading, Carriage and then safe unloading of the following material from Store Centres Under the jurisdiction of EEESD Ayodhaya to dump at site proper stacking of materials.

STP 11 Mtr.

PCC 8.5 Mtr.

11 KV Cable 3x300 sq. mm XLPE

11 KV cable jointing kit outdoor 3x300 sq.mm. XLPE

11 KV S/T cable jointing kit 3x185 sq.mm. XLPE

M.S.Angle iron 65x65x6 bracing 2700 mm

11 KV Top channel 100X50X 2240 mm

11 KV V-Type X- Arm 100X50 mm

M.S.Angle For Guarding iron 65x65x6

GI Wire 6 SWG

GI Wire 8 SWG

Stay wire 7/10

11 KV Pin Insulator polymer type

11 KV Polymer Disc insulator Extra

ACSR WEASEL CONDUCTOR (10x3+5%)

T-off Channel (100x50) mm Extra

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Sectional Double pole for 11 KV Line on 8.5 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 2700 mm , Bracing angle 1 set.,11 Kv , Disc insulator 6 No. and 3 No. Pin insulator as per norms. (Contractor shall provide , E- Bracket , necessary clamps, Disc Fitting, Nut - Bolts etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 11 KV Line on 11.0 Mtr STP Pole with fitting of necessary clamp & other acessories like 1 no X Cross Arm, 3 No. polymer Pin insulator as per norms. (Contractor shall provide , necessary clamps, F-brackets, Nut - Bolts, Washers etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 11 KV Line on 8.5.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 no X Cross Arm, 3 No. polymer Pin insulator as per norms. (Contractor shall provide , necessary clamps, F-brackets, Nut - Bolts, Washers etc.)

Erection of single stud pole support on PCC Pole 8.5 Mtr long with fixing of necessary clamps and other accessories required for erection. (Contractor shall provide necessary clamps, Nut - Bolts, Washers etc)

Earthing of Pole STP /PCC by 6 SWG Wire by providing and fixing of 20 mm dia' earthing rod 2.550 Mtr. long as per norms complete in all respect. (Contractor shall provide all the material Like Earthing rod, Earthing clamps and nut & bolt etc.)

Nozeling and grouting of stay set extra at angle locations (All materials will be arranged by the contractor except stay wire)

High Pressure testing to which 11 KV Line & cable to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR Dog conductor. ( Testing equipment will be arranged by the contractor)

Cradle Guarding of 11 KV line at road crossing, 11 KV line crossing, canal/telephone line crossing by fixing Guarding Angle 65x65x6 mm, 2500 mm at double pole and 1600 mm long at single pole by stringing and sagging of 2 No. G.I.wire with lacing and tightening with mounting. (Contractor shall provide Necessary clamps for fitting of guarding angle and 6 No. Eye Bolt 12x110 mm etc.)

Stringing, sagging, binding and Jumpering of ACSR Dog conductor. 3 Phase (each phase includes 10 km conductor) of 11 KV Line including fixing, mounting of P.G.clamp suitable for Weasal Conductor at sectional point. (Contractor shall provide necessary PG clamps etc & quality of conductor include extra 5% of jumerping, sagging, cutting etc)

Laying & Dressing of 3x185 sq. mm XLPE Cable underground .(D/C) Laying of 3x185 sq .mm XLPE Cable in normal soil by digging of trench 900 mm deep, 450 mm wide including supply of required materials, as 1st class Bricks, and fine sand. Providing 150 mm fine sand cusion beneath, and 150 mm sand cusion above the cable. The cable shall be duly protected by Bricks sand as per RESPO norms .After laying the cable refilling and ramming of the left out soil,closing the trench and leveling.

Installation of Heat Shrinkable Type cable jointing kits of following types/sizes for 11 KV XLPE Cable.

(a) Fixing of 11 KV 3x185 sq. mm Outdoor End Terminations (jointing kit supplied by dept.)

(a) Fixing of 11 KV 3x185 sq.S/T Jointing kit (jointing kit supplied by dept.)

Hoisting of 11 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x185 sq mm cable fixing of proper support and its clamping, providing long barral lugs 3 nos and P.G. Clamps for weasal conductor & "Y" shape jumpering properly and 02 nos. supporting angle 65X65X6, 2240 mm long and making connection including supply of jumpering cable ,mounting clamps as per RESSPO Norms. (All material will be supplied by the contractor like M.S Pipe , P.G. Clamps, Al. Lug And Supporting Angle 65x65x6, 2240 mm).

Grouting of structure by digging of pit 1.83 Mtr deep for 11/9 Mtr STP/PCC , foundation is provided with help of steel or wooden formers, groutung with 1:4:8 Ratio cement, sand & first class brick ballast 0.285 cu mtr for 11/9 Mtr STP/PCC, plinthing 0.3 Mtr above G/L and proper plastering.

11 Mtr ST Poles

8.5 Mtr PCC Poles

Supply and fixing of a stone pad of size 300x300x75 mm at PCC/STP Bottom of the pit ( Contractor shall provide all materials)

Fixing of barbed wire on pole Supply and fixing of barbed wire on the pole above 2750 mm ground level. Barbed wire wrapped for a distance of 0.9 mtr. with a pitch of 13.mm at a height. (All materials supplied by the contractor)

Fixing of Danger board . Supply and fitting of Danger board of size 250x200x2 mm 3650 mm above ground level as per Respo norms.RESPO Drawing No-55 (Provided by contractor)

Nozeling and grouting of stay set complete for sectional double Pole (All materials will be arranged by the contractor except stay wire 7/10)

Number Plate With Clamps and Nuts & Bolts above ground level as per Respo norms.RESPO Drawing. (Provided by contractor)

fixing 9 No. 11 KV Disc Insulator polymer 45 KN & Disc fitting.( Disc fitting provided by the contractor)

fixing 6 No. 11 KV Pin Insulator polymer At turning of 11 Kv line/ section of 11 KV line with all necessary clamps Nut Bol& washers (All material will be supplied by the contractor)

Providing and fixing 10 No. Tee-off chanel

Painting of poles Painting of 11 Mtr S.T. pole with one coat of red oxide, two coats of enamel paint ISI mark. (All required material will be supplied by the contractor)

Hindustan Electric Work

M/S INDIA ELECTRICALS