Provn of garbage bins, parking shed, shed for tradesman and other sanctioned works at Mil Stn Abohar

Amount

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed by Engineer - in – Charge.

S&F anodized aluminium frame for doors, windows, ventilators, partitions etc., with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer-in-Charge.

S&F Anodised aluminium door shutters with Powder Coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engineer - in - Charge .

S&F anodised aluminium grill diamond shape 100mmx100mm aperture of 6mm dia round bars including necessary joining cleats, clips, anodised aluminium snap beading, screws, complete all as specified and as directed by Engineer-in-Charge.

S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in - Charge .

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

S&F door closer hydraulically regulated, aluminium (Die cast) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width complete all as specified and as directed by Engineer-in-Charge.

S & F double action hydraulic floor springs of approved brand and manufacturer (Conforming to IS) for aluminium doors including cutting and making good the floor as required at site complete all as specified and directed by Engineer - in - Charge .

S & F aluminium mortice lock with four levers vertical type, size 75mm with necessary screws etc complete all as specified and directed by Engineer - in - Charge.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed by Engineer - in - Charge .

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance not exceeding 50m and making good surface all as specified and directed by Engineer - in - Charge.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed by Engineer - in – Charge.

M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed by Engineer - in - Charge

Removal of excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by Engineer - in - Charge.

M&L for Hardcore of gauge n exc. 63 mm of broken stone, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Engineer - in - Charge.

M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge.

M & L machine pressed precast concrete interlocking paver blocks any size and shape factory casted with grey cement and no pigment and conforming to IS 15658-2006 of 80mm thickness, M-40 Grade and laid over and including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed by Engineer - in - Charge.

S & F structural steel in roof trusses Fe 410-W (Gde E- 250 ), quality-A, (framed), trussed, purlins, rails and fastenings and heavy bracket framing including distance pieces, cleats etc all as specified and directed by Engineer - in - Charge.

M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M & L three coats of white wash including preparing new plastered or unplastered surfaces of walls complete all as specified and directed by Engineer - in - Charge.

M&L rolled mild steel plates (Plain or chequered) Fe 410-W (Gde E- 250 ), quality-A, channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment complete all as specified and as directed by Engineer-in-Charge.

M & L providing two coats of synthetic enamel paint and a coat of red oxide primer on new steel surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge .

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engineer - in - Charge.

S & F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each scre-wed end to be fitted with washers and one hexagonal or square nut, exc 30cm long all as specified and directed by Engineer - in - Charge.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or manholes, cesspits, pipes and cables etc. not exc 10 Sqm on plan and getting out in soft / loose soil all as specified and directed by Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers of soft / loose soil not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.

M & L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, seismic and other similar bands, benching, coping, bed blocks, apex stones and kerbs etc including use of necessary form work all as specified and directed by Engineer - in - Charge .

M & L applying one coat of cement base paint on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of painted surfaces complete all as specified and directed by Engineer - in – Charge

Providing precast cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregates as in louvers and jallies, 40mm thick (measured solid) including all mouldings set in cement mortar 1:4 all as specified and directed by Engineer - in - Charge.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M & L two coats of distemper oil emulsion over chalk whiting, preparatory to distempering, on newly plastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge.

M & L two coats of cement paint on plastered wall surfaces including preparation of surface after complete removal of existing treatment complete all as specified and directed by Engineer - in - Charge .

M & L Reinforced cement concrete M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5mtr clear span etc complete all as specified and directed by Engineer - in - Charge .

Form work to sides and soffits of floor or roof beams, lintels cantilevers, shelves including supports, over hangs and the like for rough finished surfaces complete all as specified and directed by Engineer – in – Charge.

M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge .

Supply and fixing drapery curtain rod 25mm dia, fancy type, fabricated out of mild steel sheet not less than 20 guage, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated powder coated natural color complete all as specified & directed by Engineer-in-charge.

S & F mild steel as in framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive for steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer - in - Charge.

M & L providing two coats of synthetic enamel paint and a coat of red oxide primer on new steel surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge .

S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 300mm all as specified and directed by Engineer - in - Charge.

S & F MS butt hinges, medium weight cold rolled 100mm size all as specified and directed by Engineer - in - Charge .

S & F mild steel pressed handles oval type, stove enamelled black 150mm size all as specified and directed by Engineer - in - Charge .

Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge.

M & L for glazed ceramic coloured tiles 7mm thick 300 x 200mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified and directed by Engineer - in – Charge.

M & L for non skid ceramic coloured tiles with matt finish, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4) complete all as specified and directed by Engineer - in - Charge.

M & L for non skid ceramic coloured tiles with matt finish, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 10mm thick cement and sand screed (1:3) complete all as specified and directed by Engineer - in - Charge.

S & F Steel rolling shutters, having thickness of laths 1.25mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer-in-Charge.

S & F Ball bearing for rolling shutters complete all as specified and directed by Engineer-in-Charge.

S & F PVC pipes (SWR) single socketed with rubber ring joints 110mm dia laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge .

M&L PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benches for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm internal dia for pipe all as specified and directed by Engineer - in - Charge.

M & L 40 mm thick Cement Concrete 1:2:4 type B–1 using 20mm graded stone aggregates flooring finished even and smooth without using extra cement all as specified and directed by Engineer - in – Charge .

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with waste pipe PVC 40mm dia all as specified and directed by Engineer-in-Charge . (ISI Marked)

S & F rotational moulded polythene water storage tanks, white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .

S & F ball brass valve 20mm bore dia high pressure with polythene float and fly nuts complete screwed with iron pipe or brass ferrule and fixed all as specified and directed by Engineer - in - Charge .

S & F gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 20mm bore complete all as specified and directed by Engineer – in – Charge.

S & F 15mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .

S & F 20mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .

S&F bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed by Engineer – in – Charge .

S & F PVC pipes (SWR) single socketed with rubber ring joints 75mm dia laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge .

S&F PVC waste pipe 32mm dia 90cm long all as specified and directed by Engineer - in - Charge .

M & L for 75mm thick cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in plinth protection etc all as specified and directed by Engineer - in - Charge.

S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work for water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge.

S & F aluminium handle cast type anodised, 150mm long all as specified and directed by Engineer - in - Charge.

S&F Welded steel wire fabric not exc 4 kg weight per square metre supplied and fixed complete to wood or steel members all as specified and directed by Engineer - in - Charge.

S & F mild steel, 300mm, ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer - in - Charge.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20mm screed bed or bedding layer of cement mortar in cement mortar 1:6 as in floors, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl grinding/rubbing and polishing complete all as specified and directed by Engineer - in - Charge .

S&F 0.63mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed by Engineer - in - Charge .

M&L rendering 10mm thick in CM 1:6 on fair face of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .

M&L for glazed ceramic coloured tiles 7mm thick 450x300 mm size in vertical surface set and jointed in neat cement slurry and pointed n white cement paste pigment to the shade over 15mm thick cement sand sand screed(1:4) complete all as specified and directed by Engineer - in - Charge .

M&L for two coat of oil bound distemper over a coat of clearcolle primer on newly plastered surface of wall incl preparation of surface complete all as specified and directed by Engineer-in-charge.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engineer-in-charge.

M&L PCC 1:3:6 type C-2(40mm Graded aggregate) 75mm thick as in Subbase to floors, subbase even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

S&F 40mm bore dia Waste coupling of PTMT (half of full threaded), (Minimum weight 32mm-45gms/40mm-60gms) all as specified and directed by Engineer-in-charge.

PAREEK AND COMPANY

SUDESH ENTREPRISES