REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION FITTINGS FIXTURES IN MAP ACCN OFFRS MD ACCN OFFRS MESS AND OLD BUILDINGS OF BOWENPALLY AND BOLARUM AREA UNDER AGE E M N OF GE N SECUNDERABAD

Amount

Taking down the existing unserviceable point wiring of any description, type, size of light or fan or power or two way or bell etc on TW batten or conduit including removal of batten or conduit or gutters or wooden boards or switches or sockets or regulators or light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall or ceiling to match with the existing surfaces complete all as specified and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked on surface etc., with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed. for the following :- (a) One light / bell point controlled by one, one way switch 5 amps, single pole.

All as per Sr item No. 2 above, but one ceiling fan/exhaust fan point controlled by one, one way switch 5 amps, single pole and regulator

All as per Sr item No. 2 above, but one 3 pin 5 amps switch socket out let point controlled by one switch on independent board

All as per Sr item No. 2 above, but one 3 pin 5 amps switch socket out let point controlled by one switch on same board

All as per Sr item No. 2 above, but one light point controlled by two, two way switch 5 amps, single pole

All as per item No. 2.00 here in before, but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade FRLS confirming to IS-694 for 3 pin 15 amps switch socket combination point on independent board and running of 2.5 Sqmm copper conductor PVC insulated cable FRLS as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

Supply and fix in replacement Modular switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and as directed

Supply and fix in replacement MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix in replacement MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and as directed.

Supply and fix in replacement electronic ceiling fan regulator MODULAR 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.

Supply and fix in replacement Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and directed.

Supply and fix in replacement Switch MODULAR 1 WAY 16 amps, 230 Volts on existing board including taking down complete all as specified and as directed.

Supply and fix in replacement Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.

Supply and fix Lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks complete all as specified and as directed.

Supply and fix Ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed.

Supply and fix wall mounted Indus plus LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with necessary mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and LED Tube 20W including taking down existing unserviceable tube light fitting complete all as specified and as directed. Make : Havells Cat No-REGALBATTENT8UPTO 1X22WSSBSWH incl Tube Rod cat No-PHOTONULTRA 2.01213T8SSTL20WLED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE, Philips Cat No - TMC501P1xT-LED22WP3241 incl tube rod 20w.

Supply anf fix in replacement LED security light luminaire fitting of 1x25 watts with deep drawn housing including all accessories complete all as specified and as directed. Make: Havells Cat No - ENDURAPEARLSL25WLED 757SASYTOPCMP, Wipro Cat No LLR06-311-XXX-57-XX, Philips Cat No - BRP046LED30CWMRS 1PSVGR.

Supply and fix in replacement recess mounting ultra slim flat panel 2'x2' made of extruded aluminium frame with electronic driver luminaire 36 watts LED glare free opal diffuser series mounted in ceiling surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make - Havells Cat No - STARTO2X2PLR36WLED840MOD incl driver LED DRIVER36V36WS, Wipro Cat No - CRCO23R036HP65G3, Philips Cat No - RC383B LED36S-6500 PSU OD WH PIR.

Supply and fix wall mounted LED Batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x10W, 230 Volts, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as specified and as directed. MAKE: Havells Cat No- LUMILINEPLUSBS10WLED865 SPCSS, Wipro Cat No - LL20-111-XXX-65NE3, Philips Cat No - BNO21LED10S-6500PSUGRS1.

Supply and fix vertical type TPN distribution board of 4 way double door with incoming MCCB TPN 415 volts AC, 3 phase, 50 Hz, 25 KA Breaking Capacity with fixed magnetic setting for current rating of capacity 100 Amps including MCCB 4P conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommodated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement and taking down old unserviceable DB complete all as specified and as directed. Make : Havells-Cat Part No VTPN_DHDLVDRWGOF O04 & MCCB Cat No - IHLGHF0100, Standard Cat No - DSDLVDRBAOFO01 & MCCB Cat No - ISLASF0100, C&S Cat No - CSDBMCCB100DD041P43S & MCCB Cat No - CSC3S4100.

Supply and fix sheet metal enclosure MCB DB SPN 12 Way with 200 Amps rated bus bar of 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed.

Supply and fix sheet metal enclosure MCB DB SPN 8 Way with 200 Amps rated bus bar of 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed.

Supply and fix sheet metal enclosure MCB DB SPN 4 Way with 200 Amps rated bus bar of, 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed.

Supply and fix MCB SPN 40 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed. Make : Havells Cat No DHMGCSNF040, Standard Cat No - DSMGCNF040, C&S Cat No - CSMBS1C40N.

Supply and fix MCB SP 6 to 32 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed.

Material and labour for sub main wiring with two runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 6 square mm and drawing through PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Material and labour for sub main wiring with two runs of single core FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 2.5 square mm and drawing through PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 2.5 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 2.5 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Supply and fix in replacement MCB SPN 40 amps 240 volts suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fix in replacement MCB SP 6 to 32 amps 240 volts suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fix in replacement MCB TP 63 amps 415 volts suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fix in replacement MCB TPN 63 amps 415 volts suitable for fixing in MCB DB complete all as specified and as directed.

Supply and fix in replacement Rigid PVC conduit 20 mm dia with necessary accessories complete all as specified and as directed.

Supply and fix in replacement Rigid PVC conduit 25 mm dia with necessary accessories complete all as specified and as directed.

Supply and fix in replacement Switch piano 5 Amps capacity flush type single pole one way 230Volts complete all as specified and directed

Supply and fix in replacement Switch piano 15 Amps capacity flush type single pole one way 230Volts complete all as specified and directed

Supply and fix in replacement socket outlet flush type multipurpose 3/5 pin 5 amps, 230 Volts complete all as specified and as directed.

Supply and fix in replacement socket outlet flush type multipurpose 6 pin 15 amps, 230 Volts complete all as specified and as directed.

Supply and fix in replacement socket combination 2 in 1, multipurpose 3/5 pin 5 amps, flush type, 230 Volts complete all as specified and as directed.

Supply and fix in replacement socket combination 2 in 1, multipurpose 6 pin 15 amps, flush type, 230 Volts complete all as specified and as directed.

Supply and fix in replacement Modular switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and as directed.

Supply and fix in replacement Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.

Supply and fix in replacement Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and directed.

Supply and fix in replacement MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix in replacement MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and as directed.

Supply and fix in replacement Switch MODULAR 1 WAY 16 amps, 230 Volts on existing board including taking down complete all as specified and as directed. Make - HAUSMANN or equivalent.

Supply and fix in replacement electronic ceiling fan regulator MODULAR 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.

Supply and fix in replacement electronic ceiling fan regulator 5 stepped type heavy duty switch/socket type suitable to work on 230 volts complete all as specified and as directed

Supply and fix in replacement Lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed on PVC round blocks complete all as specified and as directed.

Supply and fix in replacement ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed

Supply and fix in replacement Call bell ding dong type 230 Volts AC complete all as specified and as directed.

Supply and fix in replacement PVC rectangular junction box (gang box) with piano type switch socket combination for 5 pin, 6 amp, 240 volts AC for fixing in surface including taking down complete all as specified and as directed.

S& F in replacement PVC rectangular junction box (gang box) with piano type switch socket combination for 5 pin, 16 amp, 240 volts AC for fixing in surface including taking down complete all as specified and as directed.

Supply and fix in replacement MODULAR plate for 2 & 3 module, regular white for fixing on existing metal box complete all as specified and as directed.

Supply and fix in replacement MODULAR cover plate for 4 & 6 module, regular white for fixing on existing metal box complete all as specified and as directed.

Supply and fix in replacement MODULAR cover plate for 8 module, regular white for fixing on existing metal box complete all as specified and as directed.

Supply and fix in replacement of batten for light fitting T5 & T8 tube light complete all as specified and directed. Make: Havells cat No REGALBATTEN8UPTO 1X22 WDSBSWH, Wipro Cat No - LL13-181-65SE, Philips Cat No - TMC501P1XT-LED22WP3241.

Supply and fix in replacement Ultra bright LED polycarbonate tube light 20 watt with very high efficiency suited for installation in existing T8 fitting with G13 lamp holders (single side connection) complete all as specified and directed. Make: Havells cat No PHOTONULTRA2.012 13T8SSTL20WLED865SPC, Wipro Cat No - WI0922208, Philips Cat No - 1200MM20w865 T8INDI.

Supply and fix in replacement LED driver for LED light fitting 1x36Watt, complete all as specified and as directed. Make: Havells cat No LEDDRIVER36V36WS, C&S Cat No - LTCFC0066 & Wipro.

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete.

M & L for cutting chases, pining to making good to facing where ever required and pointing in cement motor 1:3 to ends or edges of endings, steps, cills etc and cutting chases for concealed wiring making good and cutting not exceeding 10 cm girth complete all as specified and as directed.

Taking down ceiling fans 48"/56" sweep, cleaning the dust properly, oiling and greasing of bolts and bearings including refixing and connecting up complete all as specified and as directed . Note : Defective/worn out parts if required shall be measured and paid separately under relevant items as supply & fix in this schedule.

Supply and fix in replacement Fan condenser of capacity 2.00/2.50 Mfd complete all as specified and as directed.

Supply and fix in replacement sealed ball bearing suitable for ceiling fan of size 1200/1400mm sweep complete all as specified and as directed.

Supply and fix in replacement Flexible copper wire/ cable three core of size 23/76" complete all as specified and as directed.

Supply and fix in replacement Rubber bushes with 'U' type MS clamp, bolt, nut and split pins of heavy duty suitable to existing fan complete all as specified and as directed.

Supply and fix in replacement Mild steel rod for ceiling fans of 3ft long duly screwed threads with check nuts & pin for ceiling fan complete all as specified and as directed

Supply and fix in replacement Nut and bolts washers for fan blades fixing of ceiling fan of any make/size/type (6 Nos for each set) complete all as specified and as directed .

Material and labour for rewinding the burnt ceiling fan motor with super enamelled copper wire of suitable size for 1200 to 1400 mm sweep of any make, type, model including necessary transportation complete all as specified and as directed.

Supply and fix fan blade of size 1200mm sweep of any make, type, model including necessary transportation complete all as specified and as directed.

Taking down the geysers of capacity 25/35 from its mounting position by removing all water and electric connections and de-assembling the geyser and carrying out the following works, (a) Descaling, cleaning the inner tank thoroughly and there should not be any bad taste of water. (b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the Geyser and making electric connections, inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers. Note : Defective /worn out parts if required shall be measured and paid separately under relevant items in this schedule.

Supply and fix in replacement rubber PVC gasket to ensure water tightness for 25 Litres capacity complete all as specified and as directed

Supply and fix in replacement mild steel base plate cup of any type with screws of suitable size complete all as specified and as directed

Supply and fix in replacement heating element of the 1.5/2 KW rating including rubber washers of any make and type complete all as specified and as directed.

Supply and fix in replacement thermostat for the geyser of 25/50 litres capacity complete all as specified and as directed

Supply and fix in replacement of PVC insulated multistranded copper conductor, 1100 Volts grade, un sheathed, 3 core of 2.5 square mm size complete all as specified and as directed.

Supply and fix in replacement industrial type plug top 2 pole with earth plug of 20 Amps of 240 volts capacity complete all as specified and as directed.

Supply and fix in replacement single pole and neutral sheet metal enclosure with a two pin and earth plug and socket with single pole MCB 20 Amps 240 volts complete all as specified and as directed.

Supply and fix in replacement PVC connecting tube of 600mm long with two brass adopters suitable for hot water of 15mm dia pipe superior quality complete all as specified and as directed.

Supply and fix in replacement steel inner tank for 25 litres capacity geyser complete all as specified and as directed.

Dismantling/taking down old/UNSV distribution panel and supply, fixing and testing of indoor 3 phase LT distribution panel board factory, made out of 2mm thick CRCA sheet CPRI approved of size not less than 600x450x200mm duly powder coated wall mounted/semi grouted in wall with locking arrangement single door type, compartmentalised and provision for tapping incoming & outgoing electric connections with suitable size of copper nut bolts & lugs, glands, one MCCB will be pre fitted/mounted on proper din rails and with earth link at top/bottom detachable plates and suitable for accommodating the following items :- (a) Copper bus bar strips for TPN of 200 amps rating (min length of 300mm) and connected with MCCB by spreader terminals. (Set of 4 strips). (b) Phase indicating lamp LED type - one set of 3. (c) MCCB 4 pole, 100 Amps rating 25/26 KA breaking capacity, 415 volts - 01 No. (Make: Havells/C&S/Standard) (d) MCB SPN 10 Amps 240 Volts 'C' curve - 01 No.

Supply and fix in replacement of Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete with all accessories all as specified and as directed. Make Havells RUGBYGENXFTS10WLED865SSYMBOPC, Wipro Cat No - LW07-141-XXX-57-XX, Philips Cat No - WT202W LED6S NW PSU S2 PC.

Supply and fix wall mounted light fitting suitable for and including 1x10 Watt LED Bulb including taking down existing unserviceable light fitting complete with all accessories all as specified and as directed. MAKE: Havells Cat No CITY 3/LHDL07150099, Philips & Wipro.

Supply and fix in replacement Ultra bright 18 watt LED lamp PL-L with very high efficacy suited for installation in existing 2G11 lamp holders powered by an integral electronic driver and rearranging the existing wiring in the fitting including taking down the unserviceable lamp complete all as specified and as directed. Make: Havells Cat No LHLDEJNEUL8Z018, Wipro Cat No - LL18-161-65PL1, Philips Cat No - LED PL-L18W, 6500K 2G11.

Supply and fix in replacement of MCCB 3 pole 415 volts, 100 amps with breaking capacity 25KA and including taking down the existing UNSV MCCB all as specified and directed.

Supply and fix in repairs of wall mounted colour changing 20 watt LED batten with options 3000K, 4000K & 6500K all in one fixture including taking down existing unserviceable fitting complete all as specified and as directed. Make: Havells, Wipro & Philips.

S & F in repair concealed modular box (metal) of 2 & 3 module for mounting modular plate including taking down existing unserviceable concealed box and making good complete all as specified and directed.

S & F in repair concealed modular box (metal) of 4 & 6 module for mounting modular plate including taking down existing unserviceable concealed box and making good complete all as specified and directed.

S & F in repair concealed modular box (metal) of 8 module for mounting modular plate including taking down existing unserviceable concealed box and making good complete all as specified and directed.

S & F in repair concealed modular box (metal) of 12 module for mounting modular plate including taking down existing unserviceable concealed box and making good complete all as specified and directed.

S & F in repair MODULAR cover plate for 12 module, regular white for fixing on existing metal box complete all as specified and as directed.

S & F in repair Ballast electronic suitable for 1x28 T-5 Watts FTL fitting complete all as specified and as directed.

S & F in repair Tube rod suitable for 1x28 T-5 Watts FTL fitting.

S & F in repair blade set of four with coupling for 230/300 mm sweep of exhaust fan of any make all as directed

S & F in replacement of PVC body for exhaust fan of size 230mm sweep including fan blade complete all as specified and directed.

S & F in repair motor kit for fresh air fan of size 200mm sweep, 35 watts, RPM 1290 complete all as specified and directed.

S & F in repair motor kit for heavy duty exhaust fan of size 230mm sweep, 35 watts, RPM 1400 complete all as specified and directed.

S & F in repair motor kit for heavy duty exhaust fan of size 300mm sweep, 35 watts, RPM 1400 complete all as specified and directed.

Material and labour for sub main wiring with three runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 10 square mm and drawing through PVC conduit of 40MM dia with accessories on surface in wall/roof along with one run of 10 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 5 runs of 10 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

S & F in replacement GI bracket 40 mm dia 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts including taking down existing unserviceable bracket complete all specified and directed.

Supply and fix TPN distribution board of 4 way double door with incoming MCB TPN 415 volts AC, 3 phase, 50 Hz, 25 KA Breaking Capacity with fixed magnetic setting for current rating of capacity 63 Amps including MCB 4P conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommodated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement and taking down old unserviceable DB complete all as specified and as directed.

Brite electricals

gsrinivasarao

Universal refrigeration and Engineering Company

M/S P UDAY RAJ CONSTRUCTION