COMPREHENSIVE MAINT OF B/R WORKS AND CERTAIN REPAIR AND ASSOSIATED WORK OF PETTY NATURE IN AOR OF AFSSR UNDER AFSSR GURGAON UNDER GE (AF) GURGAON

Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition)

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc.

Demolition of Cement Concrete in sunken floors and pavings exc 15 cm thickness above ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed

Dismantling Floor, Paver Tiles, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed.

Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed. NOTE: WPC will be Measured and Paid under appropriate Item. Area includes in this items upto 2 stories of building.

M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts in patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L preparing newly wall / Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface.

M&L for One coats of white wash on old plaster surface of ceiling including prepration of surface.

M & L for 1.5mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparing Old plastered surface of walls and Scrapping down by Mechenically and applying two coat of oil emulsion distemper white or any tint etc complete as specified and directed

M&L for preparing Old plastered surface of walls and Scrapping down by Mechenically and applying One coat of oil emulsion distemper white or any tint etc complete as specified and directed

M&L preparing old Decorated/Treated Plastered surfaces of Walls upto two storey by brooming down or steel wire brushing and scraping down with Mechenically and repair with putty wherever required and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing newly Plastered surfaces of Walls upto two storey , rubbing to obtained a Smooth Surface and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M & L for Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sq

M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed.

S&F in repair Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick of 150g/cm an colour having tensile strength of 550 Mpa as in Roof Covering/ Cladding to Wall, fixed with self-tapping Screws, complete all as specified and as directed

M&L Vitirified Ceramic Tiles 7-8mm thick (Square/Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Vitirified Ceramic Tiles 7-8mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Mortar shall deem to be include in the Quoted Unit Rate.

Vitrified Ceramic tiles light shade 7-8 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L for non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 300mmx300 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Rendering Cement Mortar shall deem to be include in the Quoted Unit Rate.

M&L Coloured Glazed Ceramic Tiles 300x600x8mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Rendering Cement Mortar shall deem to be include in the Quoted Unit Rate.

M&L Floor (Paver) Tiles 300x300x8.0 to 10mm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:6, complete all as specified and as directed.

M&L Exterior (Matte Finish) Coloured Ceramic Tile 300x450x7.0 to 8.0mm thick in Vertical Surface i.e on exterior wall, facade, outer gate etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed

M&L for granite (Black) stone slab 15-18mm thick machine cut and machine polised, in skirting, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge.

M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately

M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent as approved by Engrineer-In-Charge as in Roof portion where leakage and seepage are noticed and as directed by approved applicater.

M&L for preparation of new steel surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, roof padding, Rounded & chamferd on edges, staging of water tank, benching etc and similar nature of works mixed with water liquid proofing admixture as per manufacturer's instruction including finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and directed by Engineer-in-Charge. Note :- (i) WPC shall be measured and paid separately. (ii) Rates include to carried out the work on roof slab upto 4th stories building & nothing extra shall be admissible on this account).

M&L for dismantling of existing Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking tiles any shape and size of 60/80mm thickness and refixing the same after excavating/levelling the ground surface etc complete all as specified and directed. Note : If any PCC required for subbase , sand cushion will be paid seperately in appropriate item.

M&L for Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking coloured paving block of glass fibre reinforced vibro compacted any shape and size conforming to IS-15658:2006 of 60mm thickness made with M-35 grade concrete match with grey cement and pigment etc complete all as specified and directed.

M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) in sub base of floor complete all as specified and as directed .

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base (Levelling course for laying Tiles in Flooring), complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Fibre Glass Reinforced Translucent Plain Sheeting 2.0mm thick with 20 Cm Side Lap and 15 Cm End Lap, fixed with Coach Screw and Washer in Roof, Walls, MS Gates etc., complete all as specified and as directed.

Material & Labour preparing old Decorated/Treated Plastered surfaces of Walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm

M&L for 16-20 mm thick dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm x 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including taking down old stones, silicon treatment, including including backing coat 15 mm thick in cement mortar 1:4 complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each

S&F in repairs Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall becovered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail. Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site at each door complete all as spd and directed as per specification & drawing.

S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening incl taking down old frame as per specification and drawing.

S&F 30 mm thick 2nd class Hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securiing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats.

S & F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as spd and directed.

Supply only 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cup for iron pipe or for brass ferrule complete all as specified and directed

Supply only 15mm bore Stop valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and complete all as specified and directed.

Supply only 15mm bore angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and complete all as specified and directed.

Supply only Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe complete all as specified and as directed.

Supply only 15mm bore brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting & wall flange fancy type, cast copper alloy,chromium complete all as specified and directed.

Supply only 15mm bore brass CP WHB mixer with provision for oconnecting & wall flange fancy type, cast copper alloy,chromium complete all as specified and directed.

Supply only 15mm bore brass CP sink mixer with provision for , connecting & wall flange fancy type, cast copper alloy,chromium complete all as specified and directed.

Supply only PVC hand shower (health faucet) with 8mm dia 1.20 mm lonf flexible tube and wall hook complete all as specified and directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) size 350x460x390 with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed.

Supply only Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) size 350x460x390 with Trap and Fixing Bolts complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 500x400mm in size, White (Flat Back type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

Supply only Vitreous China Wash Hand Basin 500x400mm in size, White (Flat Back type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/Erecting Stand complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x400mm, 'Orissa' Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed.

Supply only Vitreous China White Squatting Pan of size 580x400mm, 'Orissa' Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity twin flush type White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

Supply only PVC Flushing Cistern 10 Litre capacity twin flush type White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, complete all as specified and as directed.

Supply only sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply only PVC Cabinet mirror size 330 x 430mm white and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.

Supply only Looking Mirror 4/5 mm thick of size 450x600mm having all side covered with aluminum strips , and moutnted on 6mm thick AC building board / comerical board complete all as specified and as directed.

S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr.

Supply only rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted incl tank cover complete all as spd and directed.

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr.

Supply only rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted incl tank cover complete all as spd and directed.

S&F in repair polythene water storage tank 200 Ltr capacity as approved by engr-in-Charge, closed top hoisted incl 15mm float valve,socket and fixed in position incl Dismantling of existing water tanks n.exc 250 Ltr complete all as specified and as directed.

Supply only rotational moulded polythene, , water storage tank 200 Ltr capacity (Rectangular shape), closed top, cylindrical, hoisted incl tank cover complete all as spd and directed.

Supply only ( All following items are for Supply only . Samples are kept in AGE BR office. Note : All items to be supplied as per specification as specifed in SSR Part I and Part II. Make and desgin as approved by accepting officer before procurement of below items :-

Alum door handle 100mm

Alum door handle 150mm

Alum door stopper

Alum Sliding Door bolt 300mm

Alum tower bolt 125mm

Alum tower bolt 250mm

Bracket for washbasin (350 to 400mm long)

Brass Spindle for 15mm stop/bib/ wall mixer valve

Corner Shelf 300mm

CP Connection 15mm x 450mm (Geyser)

CP Health Faucet

CP Paper holder

CP Towel Rail 600mm

CP Towel Rail Rack 900mm

CP Towel Ring

CP Waste coupling 100mm (sink)

CP Waste coupling 32mm

Curtain Rod 20mm

Curtain Rod Bracket

Curtain Rod Knobs

Flush Cistern fitting Kit for low level

GI Union 15mm

GI Elbow 15mm

GI Elbow reducer 20mm x 15mm

GI Nipple 15x100mm

GI Nipple 15x150mm

GI Nipple 15x50mm

GI Nipple 20x100mm

GI Nipple 20x150mm

GI Nipple 20x50mm

GI Plug 15mm

GI Plug 20mm

GI Socket 15mm

GI Socket 20mm

GI Socket Reducer 20x15mm

GI Socket Reducer 20x25mm/Elbow

GI Socket reducer 25x15mm

GI Tee 15mm

GI Tee 20mm

GI Tubing 15mm

GI Tubing 20mm

GI Union 20mm

GI Tank Nipple 15mm

GI Tank Nipple 20mm

Glass pan 4mm thick

Hydraulic Door closer

PVC Jet Spray with 1 m tube

M Seal in kg Pkt

SS Butt Hinges 100mm

SS Butt Hinges 75mm

Nails 15mm

Nails 30mm

Nails 40mm

Nails 50mm

Nails 65mm

Particle Board 18mm/19MM 8FT X 4 FT

Plywood 8'x4'x19mm

Plywood 8'x4'x4mm

PTMT Ball cock 15mm with Rod

PTMT ball cock 20mm with Rod

PTMT shower 15mm

PTMT shower arm with flange

PTMT soap dish

Putty for glass/oil putty

PVC connection 450mm

PVC connection 600mm

PVC pipe with bend for cistern

PVC Seat cover W/C

PVC waste coupling 32mm dia

PVC waste pipe 32mm

Wire Mesh Stainless Steel 1.40mm

Synthetic Enamel Paint Black in 1 ltr packing

Synthetic Enamel Paint White 1 ltr packing

Tank lid cover for 500L/1000 PVC tank

Thinner (1 Ltr packing)

Wood Screw 15mm

Wood Screw 20mm

Wood Screw 25mm

Wood Screw 30mm

Wood Screw 35mm

Wood Screw 40mm

Wood Screw 75mm

Please Enable Macros to View BoQ information