Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.4 L+₹1.0 L (3.11%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹35.0 L+₹1.7 L (5.06%)Rejected-Finance RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹35.1 L+₹1.8 L (5.27%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹35.2 L+₹1.9 L (5.72%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹32.5 L
EMD Value
₹65,000
Closing Date
9 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS C/o 99 APO Pin-913869
PROVN OF TOILET BLOCKS, PROVN OF STORGAE ACCN AND ADDN/ALTN TO BLDG NO T-636 AT LMS AND ADDN/ALTN TO ECHS POLYCLINIC TOILET AT KOIRENGEI
2022_MES_554726_3
8440/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹65,000
Yes
4 Feb 2023
24 Dec 2022
10 Jan 2023
24 Dec 2022
9 Jan 2023
2 Jan 2023
Amount
Schedule 'A'
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in hard/dense soil complete all as specified and directed.
M & L for PCC (1:4:8) Type D2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S & F for Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.complete all as specified and as directed.
S&F Structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
S&F MS roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
M & L for expanded metal n. exe 4Kg/Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members concrete complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed.
M&L for prepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.
M&L for providing cement concrete Type C1 1:3:6 PCC Type C1 ( using 20mm graded crushed stone aggregate) as in coping incl necessary formwork complete all as specified and directed.
M & L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
M&L rendering 15mm thick on other than fair faces of brick work in cement mortar(1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. Note: WPC will be measured and paid separately)
Supply of Integral water proofing Compound ISI marked complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operatinh single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on surface complete all as specified and directed. Note :- (a) Sanding of surface to be done by mechinical sander with 1500-2700 rpm, with internal dust extraction system for cleaning environment certified by paint manufacturer. Proper mixing to be carried out before primer and paint application. (b) The work pertaining to periodical services & water proofing shall be excuted as per manufacturer instructions of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by contractor and approved by Garrison Engineer. (c) Cost of scaffolding as per requirement of building height is included in this item.
M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram / litere as per the LEEDS specification. Anti Algal properties in two coats @ 1.79 ltr (undiluted) / 10sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimun 1 ltr per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note :- (a) The work pertaining to periodical services & water proofing shall be excuted as per manufacturer instructions of which the materials i.e Paint, Distemper, Putty etc is proposed to be used by contractor and approved by Garrison Engineer. (b) Cost of scaffolding as per requirement of building height is included in this item.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.
M&L 25mm thick cement concrete Type B1 1:2:4 grade (using 20mm graded crushed stone aggregate) in floor, finishes even and rough to receive floor tiles complete all as specified and directed.
M&L joint free coloured jointfree non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L for joint free coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick cement rendering (1:4) for receiving vertical dado tiling complete all as specified and directed.
M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in cement mortar (1:4) complete all as specified and directed.
M&L for 75mm thick cement concrete Type C2 (1:3:6) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm and fixed with 30mm laps complete all as specified and directed
S&F 500 litre capacity Multi layered ISI Marked rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) hoisted and fixed in position including 20mm bore Ball brass valve , high pressure , with polythene float and fly nut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified in SSR Pt-I and directed.
S&F 1000 litre capacity Multi layered ISI Marked rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) hoisted and fixed in position including 20mm bore Ball brass valve , high pressure , with polythene float and fly nut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified in SSR Pt-I and directed.
S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F Gun metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe for 20 mm bore dia of pipe and fixed complete all as specified and directed.
S&F Gun metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe for 15mm bore dia of pipe and fixed complete all as specified and directed.
S & F bore bib taps(ISI marked) ,cast copper alloy, chromium plated long shank with capstan head fancy type , screwed down, screwed for iron pipe for 15 mm bore or for brass ferule complete all as specified and directed.
M&L PVC SWR pipe dia 110mm single socketed in any length with rubber ring fixed to walls complete all as specified and directed.
M&L PVC SWR pipe dia 75mm single socketed in any length with rubber ring fixed to walls complete all as specified and directed.
M&L PVC SWR pipe dia 110mm single socketed in any length with rubber ring joints, laid in trenches or floors.
M&L PVC SWR pipe dia 75mm single socketed in any length with rubber ring joints, laid in trenches or floors.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends with access door complete all as specified and directed.
S&F PVC (SWR) vent cowl of dia 75 mm complete all as specified and directed
S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.
S&F 110mm bore PVC (SWR) reducers complete all as specified and directed.
S&F PVC (SWR) WC connector with lip ring 110 mm specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto as per item no 60.0 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
M&L for RCC (nominal mix) Type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) in foundation incl raft, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles & mass concrete complete all as specified and directed by Engr-In-Charge.
M&L for RCC (nominal mix) Type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers,bressummers, lintels over 1.5m span bases for coloumn,basement of slab etc. complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick cement concrete Type D2 1:4:8 ( using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L for 75mm thick cement concrete Type C2 1:3:6 ( using 40mm graded crushed stone aggregate ) as in sub base complete all as specified and directed.
S&F PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.
S&F vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.
S&F vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (including flushing cistern and flush pipe,pvc connection) but including lime concrete bedding complete all as specified and directed.
S & F vitreous china wash down water closet pan European Type (pedestal pattern) white with integral foot rest with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting and acessories with seat cover (commander) complete all as specified and as directed.
S&F Vitreous China urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F vitreous china wash basin, white, flat back, size 550x400m excluding taps but including waste CP coupling , chain & plug & porcelain stopper , brackets incl cutting for pinning in ends of brackets or erecting stand and fixing and supply and waste pipe complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F angle valve 15 mm dia cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or unions complete all as specified and directed.
S&F brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
Cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girth.
M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles / paver block complete all as specified and directed.
M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F figured glass, pinhead type, 3mm thick in square not exc 0.5 sqm in each pane complete all as specified and as directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm complete all as specified and directed.
S& F aluminium anodised sliding window, 3 track system, fully glazed fitted with one side visible glass of 5.5mm thick, shutter frame size 44 x 24 x 1.8mm including chowkat of size 80 x 40 x 1.8mm and sliding fly proof shutter (using stainless steel wire cloth of gauge 0.50mm dia and aparture 1.18mm) with three track , including aluminium grill on out side throughout & providing necessary jointing cleats ,glazing clips,rubber packing, anodised aluminium snap beading,handle,screw complete all as specified and as directed.
M&L for anodised aluminium door with member size 48x44x2mm vertical and top rail, 50x44x2mm lock rail and 94x44x2mm bottom rail, chowkhat size 80x40x1.8mm including 5.5mm thick one side vision glass, hydraulic door closer, spring door stopper, aluminium round handle 100mm dia 02 nos per door shutter including necessary jointing cleat, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.
S&F pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed.
S&F in repair pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed.
S&F chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F in stop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, internal dia of pipe 150mm complete all as specified and directed.
M&L for Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe-290 Gde E-165 complete all as specified and directed.
M & L for 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 sq.cm & n. exc 25 sq.cm complete all as specified and directed
S&F soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.
M&L for PCC 1:3:6 Type C2 (using 40mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M&L for 1:3:6 Type C2 ( using 40 mm graded crushed stone aggregate ) as in wall or retaining walls, any thickness, size or shape including pilasters, buttresses coloumn, pillars, boundary pillars and post (including caps and bases) complete all as specified and directed.
S & F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light/fan point controlled by one, one way switch
(b) One celling / exhaust fan point controlled by one, one way switch.
All as per item No. 103.00 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular white cover with frame for fixing of 6 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 4 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 3 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 2 module complete all as specified and directed.
S&F blank spacer plate for single module complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.
S&F MCB distribution boards (DBs) with sheet metal enclosure, single door, IP 43 protection, 240 Volts, 2 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.
M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one 10W LED complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
S&F LED tube light fitting 20W LED 6500K basic all purpose surface and wall mounted LED robust and high perfomance batten LED luminair comprises of extruded channel in thermally conductive material glare and smooth lightwith complete all as specified and directed.
S&F in repair LED tube light fitting 20W LED 6500K basic all purpose surface and wall mounted LED robust and high perfomance batten LED luminair comprises of extruded channel in thermally conductive material glare and smooth lightwith complete all as specified and directed.
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
Taking down carefully Ceiling/Exhaust fan from its original position and refixing / hanging after plaster work complete all as specified and directed.
Refixing only exhaust fan (M.D. supply) and connecting to fan and making a whole cutting on the wall for fixing exhaust fan complete all as specified and directed. (Note :- serviceable exhaust fan obtained from item no. 123.00)
Supply & fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 300mmm and necessary fitting complete all as specified and directed.
S&F storage type electric water heater of 25 Ltrs capacity, 240 Volts, rated input 1.5 KW, PUF insulated fitted with stainless inner container and copper coil of BEE rating 5 star models, max working head of water 60 Ltrs, fixed to wall with suitable MS tower/anchor bolts, inlet/outlet pipe, grouted to wall complete all specified and directed.
S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as directed.
L BINOD CONSTRUCTION CO
MAURYA CONSTRUCTIONS
M/s Ritz Marketing
MANI PRASAD GUPTA
M/S PRADEEP CONSTRUCTION
M/s SSS Motors
APPLE CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .