SPECIAL REPAIR TO SWT AT VSN NAGPUR

Amount

Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

M&L for Brickwork with sub class 'B' Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:4) complete all as specified and directed.

Taking down cement plaster in any cement mortar on stone wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even complete all as specified.

M & L for rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

M&L for preparation of surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying water proofing liquid Dr. Fixit Pidicrete URP in two coats as per manufacture instruction mix with cement complete all as specified and directed.

Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and as directed. Note:- After ascertaining the location of leakage/ seepage/dampness under relevant item, this item shall be operated at the required location.

M&L for preparing plastered surfaces of walls and applying one coat of weather coat paint all as specified and as directed.

Surface excavation n.exc. 30 cm deep and av. 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M & L for 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

M&L for 100 mm thick Cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) in floor, paving,rough finish, making impression of expanded metal,whilst concrete green complete all as specified and directed.

M&L for forming construction (Dummy) joint 65 mm deep 10 mm wide, filled with sealing compound grade 'A' complete complete all as specified and directed.

M&L for PCC in 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required all as specified and directed.

M&L for Framed work such as grills,gratings,etc with ends of bar shouldered and or rivited or forged into spikes framed guarded bars barred iron doors ladders framed balusters walkways railings framed work of water tank stand similar work confirming-290 Gde-E-165 complete all as specified and directed.

M&L for Applying 2 coats of Synthetic Enamel paint over a coat of Primer Red Oxide on steel surface over 10 cm girth including preparation of surface complete all as specified and directed.

Excavation in post holes ( or similar holes) in any type of soil each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with eath around, in layers n.exc 25cm , watering, and removing surplus soil to a distance n.exc 50m and making good surface completed all as specified and directed.

M&L for PCC (1:2:4) type B-1(20 mm graded aggregate) for embedding post completed all as specified and directed.

S&F MS angle iron as in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire etc including all necessary drilling bolting or riveting etc, Flat iron and similar work quality conforming to Fe-290 Gde E-165 all as specified and directed.

S&F chain link MS galvanised fencing any size or type including line wires any mesh,size and type to any type of standards,rails,straining,bolts etc including provisions of binding wire complete all as specified and directed.

S&F Round bars Fe-410-W E-250 10mm dia and over cut to length ,bent to shape required including cranking , for fixing of chain link Fencing complete all as specified and directed.

S&F Mild screw bolts 5 cm long, 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate to fill undulations to achieve uniform in RCC platform/wall portions complete all as specified and as directed.

M&L for applying 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surface n.exc 10cm girth including preparation of surface complete all as specified and directed.

AK CONSTRUCTION

Asha Enterprises

Rajveer Infrastucture

Swastik Enterprises

M/s Prakash R. Verma

M/s ABHIMAN HEGDE

SIBAL AND SIBAL

Meet Road Lines

M/s Rahul Traders