Installation, Commissioning n Trial run including fabrication jobs ,civil works and drivage at stone for 1200mm width, 1x75KW, 550V, PVC Belt Conveyor, 33 Mtrs. length in Interconnection at 1150Mtr. at MIC, JPC

Amount

Dismantling, Transportation, Installation, Commissioning & Trial run including necessary fabrication jobs (including civil works and small pocket drivage at solid stone) of one 1200mm width, 1x75KW, 550V, Single Drive PVC Belt Conveyor for a length of 33 Mtrs.in Interconnection between two incline at 1110mtr at MIC, Jhanjra Project Colliery.

Dismantling of -4BL belt (i.e. discharge(3MT), drive head including motor and gear box(8MT), tail end(1MT), 33 metres structure(2.8MT)) (considering 085 MT/ meter)

Transportation and Installation of 1x75KW, 550V, Dual Drive Head Unit Complete with Drive Drum, Driven Drum, Gear Box, Motor, Coupling, Bearing Block etc. after loading it on MUV.

Transportation and Installation of Discharge Unit Complete with Cleaner after loading it on MUV.

Transportation (manually and by MUV) and Installation of Tail-end Unit Complete, after loading it on MUV.

Transportation and Installation of 33 meters of belt structure, after loading it on MUV.

Transporting, laying, lapping & jointing of 70 meters of belting.

Laying/placement of starter, ACB, cables and lock out devices,

Transportation of one L.T starter, 300A/550V ACB from -4BL/14R to proposed site by MUV (20mtr manual pulling after unloading from MUV) and place it on platform.

Laying of 250m(approx.) 70 sq mm/1.1kV PVC armoured cable at '0' substation to 1110 of old incline after loading it in MUV at -4BL/14R and transported it to proposed site and laying of lockout cable.

Civil foundation work of drive head, discharge, loop takeup and platform for installation for 1200mm belt conveyor at interconnection of new and old incline at 1115 mtr of MIC, Jhanjra Projet colliery.

Recess cutting in stone

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement :3 coarse sand(zone-III): 6 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement :2 coarse sand(zone-III): 4 graded stone aggregate 20 mm nominal size)

Brick work with Fly ash bricks of class design 75 in foundation and plinth in: CM 1:6 (1 cement: 6 coarse sand)

12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)

Loading material (sand and, stone aggregate below 40 mm nominal size) into MUV and unloading at UG

Loading material(bricks) into MUV and unloading at UG

Loading material(cement) into MUV and unloading at UG

Stone Drivage for Pocket cutting for Belt Installation along interconnection from 2nd incline towards opposite direction

Drilling & Blasting of Soft Stone, Dressing of Roof & Sides, Cleaning of blasted debris & disposal/stacking up to 15 m.

Average lead upto 30m.(Debris would be clean through 1200mm belt).

Total impact of GST for the purpose of CTC

K R ENTERPRISE

N.K. ENTERPRISE