Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹39.2 L
EMD Value
₹78,000
Closing Date
11 Feb 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sujit Kumar
Lapalang, Shillong-793006
Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
NESH/CSM/1500-1215
Open
Civil - All
Works
Namsai
₹2,000
₹78,000
5 Jan 2024
5 Jan 2024
11 Feb 2024
5 Jan 2024
4 Feb 2024
5 Jan 2024
Bid Proposal Sheet-Price Part(BPS-Vol-IC)
:: COVER PAGE ::
Name of Package Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
NIT Ref.No.: NESH/CSM/1500-1215
Document Code.: NESH/CSM/1500-1215/BPS (VOL-IC)
Address of Purchaser/ Owner Sr. General Manager (C&M)
Power Grid Corporation of India Limited.
Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
Phone /Fax -0364- 2536406
E-mail: [email protected]
I While filling up the worksheets following may please be observed :
(i) Fill up only green shaded cells.
(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
(iii) Select only the options provided in pull down menus.
(iv) Do not link any cell of this work book with any other work book.
(v) Do not use copy & paste or cut & paste options for filling up the data.
(vi) Do not reformat any of the cell of the work book.
II This Workbook consists of following worksheets :
Opening page of the workbook.
Names of Bidder :
● Select Sole Bidder or Association from the pull down menu. Do not leave this cell blank.
● Select nos. of the Association other than the Lead Partner from drop down menu.
● Fill up names and address of the Sole Bidder and /or Association.
● Fill up date in dd-mmm-yyyy format from drop down menu.
● You are required to fill only the percentage of your quoted bid price above or below the estimated cost of the subject tender in the specified cell of Schedule-1 which includes only DSR Items and rate for the Non Scheduled Items.
● Total amount shall get calculated automatically.
● The total amount shall be exclusive of all taxes and duties.
Happy Bidding !
Bidders Information
Package Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station Sole Bidder 1
Document Code: NESH/CSM/1500-1215/BPS (VOL-IC) Association 2 or More
Enter following details of the bidder
Specify type of Bidder [Select from drop down menu] Sole Bidder
Name of Sole Bidder
Address of Sole Bidder
Name of other Partner …….. …….. …….. …….. …….. ……..
Address of other Partner …….. …….. …….. …….. …….. ……..
Name of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..
Address of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..
पावर ग्रिड कार्पोरेशन ऑफ़ इंडिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
उत्तर पूर्वी क्षेत्र,/North Eastern Region,
ड़ोंगतिह, लोअर नोंग्रह/Dongtieh, Lower Nongrah,
लापालांग, शिलांग,मेघालय/Lapalang, Shillong ,Meghalaya
BID PROPOSAL SHEETS FOR PRICE PART (BPS: VOL-IC)
NIT Ref. No. NESH/CSM/1500-1215
Package Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
BID FORM FOR PRICE BID
Bidder's Name and Address:
Bid Proposal Reference: Dated:
Person to be contacted:
Telephone No.: Fax:
Contract Services,
Power Grid Corporation of India Limited
Dongtieh, Lower Nongrah
Lapalang, Shillong-793 006 (Meghalaya)
Subject: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
Document No. NESH/CSM/1500-1215/BPS (VOL-IC)
Dear Ladies and/or Gentlemen,
0.0 In continuation of Techno-commercial Bid,we hereby submit the Second Envelope of the Bid,both of which shall be read together and in conjunction with each other,and shall be construed as an integral part of our Bid. Accordingly,we the undersigned,submit our offer for Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station under the above-named package in full conformity with the said Bidding Documents for the sum of (Specify the currency and the amount in figures and words) …………. or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents.
Schedule-I: Bill of Quantities
Annexure-I to Schedule I Summary Price Proposal.
2.3 We declare that as specified in Clause 8.0 of SCC of the bIdding Documents, the contract price shall be FIRM and shall not be subjected to any price variation or price adjustment under any circumstances, whatsoever, during the execution and completion of the works.
2.5 We declare that items left blank in the schedules will be deemed to have been included in other items. The Total for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the facilities and sections thereof in complete accordance with the contract, whether or not each individual item has been priced.
0.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second envelope is exclusive of GST but include other taxes, duties, levies and chrges as may be assessed on us/our Associate(applicable for Foreign Bidder), our sub-contractor/Sub-Vendor or their employees by all Municipal, state or National Govermanet authorities in connection with the Facilities, in and outside of India.
3.1 100% of applicable Taxes and Duties i.e GST which are apayable by the employer under the contract, shall be reimburhsed by the employer on production of satisfactory documentary evidence by the contractot in accordance with the provisions of the Bidding Documents.
0.0 We further understand that notwithstanding 3.0 above, inacse of award on us, you shall also bear and pay/reimburse to us, GST applicable on work contract by us to you, imposed on the work contract specified in Schedule No.1 of the Price Scheduel in this seccond envelope , by the India Laws.
0.9 We confirm that we have also, registered/ we shall also gets registered in the GST Network with a GSTIN in all states where the project is located and the states from which we shall make our supply of Goods.
0.0 #(For Joint Ventures) We, the partners of Joint Ventures submitting, this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the contract in accordance with the contract terms and conditions.
0.0 We, hereby, declare that only the persons or firms insterested in this proposal as principles are named here and that no other persons of firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made wihtout any connection with any other person, firm or party likewise submitting a proposal is in all respect for and in good faith, without collusion of fraud.
Thanking you, we remain,
Yours faithfully,
Place: (Signature)
Business Address: (Designation)
Country of Incorporation:
(State or Province to be indicated)
Name of the Principal Officer:
Address of the Principal Officer:
Document Code No.:NESH/CSM/1500-1215/BPS (VOL-IC) Annexure-I to Schedule - 1 of BPS, Vol-IC
Name of Work: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(SUMMARY OF PRICE PROPOSAL)
Bidder’s Name and Address
Name : C&M Deptt.
Address : Power Grid Corporation of India Ltd.,
NERTS, Lower Nongrah, Lapalang
Shillong - 793006
We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents. We have indicated the Percentage and Amount to the Total Estimated Cost as indicated in the “Bill of Quantity (BOQ) & Prices” covering the entire scope of works enclosed herewith as Schedule-1. Incase of discrepancy, the quoted percentage as per this Schedule shall prevail.
Sl. No. DSR Item No Description Unit Quantity Rate (Rs.) Quoted Unit Rate (Rs.) Amount (Rs.) SAC (Service Accounting Codes) Whether SAC in column 8 is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column 10 is confirmed. If not indicate applicable rate of GST #
Part-A: Boundary Wall
1 5.2 Reinforced cement cocrete works in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts, ans struts etc upto floor five levelexcluding cost of centring, shuttering, finishing and reinforcement.
a 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cu.M. 0.000 12185.68 995454
2 5.9 Centring and shuttering including strutting, proping etc. and removal of form for :
c 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sq.m. 0.200 962.23 995457
3 5.22 Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete.
4 6.4 Brick work with bricks of class designation 75 in super structure above plinth upto floor V lvl….
a 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M. 0.305 9916.42 995456
5 10.2 Structural Steel work riveted, bolted or welded in built up sections, trusses & framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Kg 10036 133.94 995476
6 13.2 15mm cement plaster on the rough side of single or half brick wall of mix :
a 13.2.2 a) 1:6 (1 cement : 6 fine sand) Sq.m. 0.600 388 995472
7 13.1 12mm Cement Plaster of mix
8 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
a 13.61.1 Two or more coats on new work Sq.m. 3913 157.27 995473
9 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Sq.m. 3913 24.95 995473
10 13.65 Painting with black anti corrosive bitumastic paint of approved brand and manufacture to give an even shade.
a 13.65.1 Two or more coats on new work (grating) Sq.m. 45 137.71 995473
11 13.44 Finishing walls with water proofing cement paint of required shade.
a 13.44.1 New work (two or more coats applied @ 3.84 kg/10sqm) Sq.m. 3913 116.77 995473
12 16.53 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) m 915 363.3 995421
PART - B: SECURITY ROOM & GATE
13 9.131 Providing and fixing factory made Pre-laminated particle board flat pressed 3 layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS:12823 Grade 1 Type II, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all-round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc complete as per drawing and direction of Engineer-in-charge ( Cost of U beading and hinges will be paid separately.)
14 9.132 Providing and fixingaluminium U beading of required size to pre-laminated/flush door shutter including fixing etc. complete as per direction of Engineer-in-charge Kg 10 634.47 995476
15 9.95 P/F ISI marked aluminium butt hinges ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete :
16 9.96 P/F aluminium sliding door bolts ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete
17 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete
18 9.1 P/F aluminium handles ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete
19 9.101 Providing & fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete
a 9.101.1 Single rubber stopper Each 2 42.47 995476
20 9.102 Providing & fixing aluminium casement stays ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required color or shade with necessary screws etc. complete Each 7 77.23 995476
21 10.17 Providing and fixing M.S. fan clamp type I of 16mm dia M.S. bar bent to shape with hooked ends in RCC slabs during laying including painting the exposed portion of loop, all as per standard design complete. each 1 222.48 995476
22 10.2 Structural Steel work riveted, bolted or welded in built up sections, trusses & framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Kg 1300 133.94 995476
23 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubalar sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasterners including necessary filling of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, CP brass/stainless steel screws, all complete as per drawing and direction of Engineer-in-charge ( Glazing & panelling to be paid for separately ) :
a 21.1.1 For fixed portion
21.1.1.3 Polyester powder coated aluminium(minimum thickness of Polyester powder coating 50micron) Kg 52 567.94 995476
b 21.1.2 For shutters of doors, windows & ventilators including providing & fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required ( Fittings shall be paid for separately )
21.1.2.3 Polyester powder coated aluminium(minimum thickness of Polyester powder coating 50micron) Kg 12 686.03 995476
24 21.3 Providing & fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per drawings and direction of Engineer-in-charge ( Cost of aluminium snap beading shall be paid in basic item )
a 21.3.2 With float glass panes of 5.50mm thickness sqm 6 1585.93 995476
25 11.26 Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including and polishing complete with base of cement mortar 1:4 ( 1 cement 4 coarse sand )
26 11.27 Kota stone slabs 25mm thk in risers of steps, skirting dado and pillars laid on 12mm (average) thk cement mortar 1:3 ( 1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including and polishing complete Sq.m 2 2438.98 995474
34 11.37 Providing & laying Ceramic floor glazed tiles 300x300mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS: 15622 of approved make in colors such as Ivory, grey, fume, red brown, laid on 20mm thk cement mortar 1:4 ( 1 cement 4 coarse sand ) including pointing the joints with white cement and matching pigment etc. complete Sq.m. 2 1119.38 995474
27 8.31 Providing & laying Ceramic glazed wall tiles conforming to IS: 15622 ( thickness to be specified by the manufacturer ) of approved make in all colors shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thk bed of cement mortar 1:3 ( 1 cement 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg/sqm including pointing in white cement mixed with pigment of matching shade complete. sq.m 6 1272.34 995474
28 11.3 Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate ) finished with floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.
29 13.37 White washing with lime to give an even shade :
a 13.37.1 New work (three or more coats) sqm 16 38.82 995473
30 31.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
a 13.41.1 New work ( two or more coats) over & including priming coat with cement primer sq.m 50 194.48 995473
31 13.44 Finishing walls with water proofing cement paint of required shade :
a 13.44.1 New work (Two or more coats applied @ 3.84kg/10 sqm) Sq.m. 95 116.77 995473
32 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sq.m. 7.5 815.55 995454
33 22.7 Providing & laying integral based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations:
a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the sirface before treatment.
b) Laying brickbats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 ( 1 cement 5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thk layer of cement mortar of mix 1:5 ( 1 cement 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similiarly the adjoining walls upto 300mm height including rounding of junctions of walls & slabs.
c) After 2 days of proper curing applying a 2nd coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge
d) Finishing the surface with 20mm thk jointless cement mortar of mix 1:4 ( 1 cement 4 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-chargeincluding laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep
e) The whole terrace so finished shall be flooded with water for a minimum period of 2 weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
22.7.1 With average thickness of 120mm and minimum thickness at khurra as 65mm Sq.m. 25 1822.1 995453
34 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design
a 12.21.1 In 75x75mm deep chase. metre 19 311.31 995453
35 12.22 Making khurras 45x45 cm with average minimum thick ness of 5cm cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) over PVC sheet 1m x 1m x 400 micron finished with 12mm cement plaster 1:3 (1 cement : 3 corase sand) and a coat of neat cement rounding the edges and making and finishing outlet complete. each 1 318.97 995453
36 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes
a 12.41.2 110 mm diameter metre 5 382.5 995453
37 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion
a 12.42.3.2 Single tee with door 110x110x110 mm each 1 245.81 995453
38 12.43 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brickwork & fixing in cement mortar 1:4 ( 1 cement 4 coarse sand ) and making good the wall etc. complete.
39 17.1 Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
a 17.1.1 White Vitreous china Orissa pattern W.C. pan.of size 580x440mm with integral type foot rests each 1 6916.97 995478
40 17.7 Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillar taps, Kingston/Gem/Techno/Parko, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
a 17.7.4 White Viteous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap each 1 2009.52 995478
41 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
a 17.28.1 Semi rigid pipe
42 17.29 Providing and fixing 100mm sand cast Iron grating for gully, floor or Nahani trap. each 1 54.14 995478
43 17.35 Providing and fixing soil, waste and vent pipes
a 17.35.1 100 mm dia
17.35.1.2 Centrifugally cast (Spun) iron socketed pipe as per IS: 3989 Mtrs. 5 1289.03 995478
b 17.35.2 75 mm dia
17.35.2.2 Centrifugally cast (Spun) iron socketed pipe as per IS: 3989 Mtrs. 2 1246.8 995478
44 17.31 Providing and fixing 600x450 mm beveled mirror of superior glass (of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete . each 1 1688.34 995478
45 18.1 Providing and fixing GI pipes complete with GI fitting and clamps, including cutting and making good the walls etc. (Internal work)
a 18.10.2 20mm dia nominal bore M 5 446.69 995478
b 18.10.3 25mm dia nominal bore M 10 587.69 995478
46 18.11 Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall
a 18.11.1 15 mm nominal bore Meter 10 580.51 995424
b 18.11.2 20 mm nominal bore Meter 5 647.39 995424
47 18.16 Providing and fixing brass stop cock of approved quality.
a 18.16.2 20 mm nominal bore Each 2 392.37 995424
48 18.15 Providing & Fixing brass bib cock of approved quality
a 18.15.1 15mm nominal bore each 2 363.53 995424
49 19.33 Constructing soakpit 1.20 x 1.20 x 1.20m filled with brickbats including S.W. drain pipe 100mm diameter and 1.20m long complete as per standard design each 1 3517.74 995424
50 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank per litre 500 11.61 995424
51 1.1 WGSTLPT Point wiring in steel conduit,with piano type switch :
Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required.
a 1.1.1 Group A Point 8 1221 995461
52 1.2 WGSTLPTTC Twin control point wiring in steel conduit, with piano type switch :
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. Point 2 1835 995461
53 1.5 WGSTLPP2 Power plug wiring in steel conduit ( 2x4 sq.mm ) Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, alongwith 1 no 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required. Meter 2 433 995461
54 1.7 WGSTLSB Circuit/submain wiring in steel conduit : Wiring for circuit/sub main wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required
a 1.7.1 2x1.5 sq.mm + 1x 1.5 sq.mm earth wire metre 25 327 995461
b 1.7.3 2x4 sq.mm + 1x4 sq.mm earth wire metre 12 428 995461
55 1.20 STLCON S/F steel conduit : Supplying & fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required .
56 1.18 TLWGEC Telephone wiring in existing conduit:
Supplying and drawing following pair,0.5 sqmm FR PVC insulated copper conductor ,unarmoured telephone cable in the existing surface/recessed steel/PVC conduit.
57 1.22 S/F metal boxes:
MB Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
1.22.1 75 mm x75 mm x 60 mm deep Each 2 178 995461
58 1.23 S/F piano type switch/socket:
PTSWEB Supplying and fixing following piano type switch/socket on the existing switch box/cover including connections etc.as required.
1.23.6 Telephone socket outlet Each 1 109 995461
59 1.29 S/F light plug point piano type accessories:
LPACCPT Supplying and fixing metal box of 150 mm. x 75 mm. x 60 mm. deep (nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch connections, painting etc. as required. Each 1 358 995461
60 1.3 S/F power plug point piano type accessories:
PPACCPT Supplying and fixing metal box of 180 mm. x 100 mm. x 60 mm. deep (nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 PIN 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch,connections, painting etc. as required Each 1 488 995461
61 1.41 ITC fluorescent fitting directly on surface::
ITCFFSUR Installation testing and commissioning of prewired, fluorescent fittings /compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connections with 1.5 sq. mmFR PVC insulated, copper conductor single core cable and earthing etc. as required. EACH 6 206 995461
62 1.45 ITCCFFC ITC Ceiling Fan with cover on fan box :Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm FR PVC insulated copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required EACH 1 339 995461
63 1.50.1 ITC exhaust fan upto 450 mm sweep
ITCEF450 Installation of exhaust Fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required. EACH 1 450 995461
64 1.52 Fixing louvers/shutter for exhaust fan:
LOUSHEF Extra for fixing the louvers/shutters complete with frame for a exhaust fan of all sizes. EACH 1 207 995461
65 1.5 Carriage of Fan
66 1.51 Numbering of fan/fitting
NUMFANFT Numbering of exhaust fan/flourescent fittings as required. EACH 8 57 995461
67 2.41 S/F prewired SP MCB DB :
68 NS Supplying and fixing following way, single pole and neutral, prewired sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with loose wire box, terminal blocks, duly prewired with suitable size FR PVC insulated copper conductor upto terminal blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, inter connections, phosphatized and powder painted including earthing etc. as required.( But without MCB/RCCB/Isolator)
2+8 way Double door EACH 1 1789 995461
69 2.10 S/F 'B' Series SP MCB:
MCBB Supplying and fixing 5 amps to 32 amps rating, 240 volts,'B' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
2.10.1 Single pole and neutral EACH 4 256 998736
70 2.13 MCBTPIS S/F TP MCB Isolator :Supplying and fixing following rating four pole 415 volts isolator in the existing MCBDB complete with connections, testing and commissioning etc. as required
71 5.2 GI Earth Pipe Electrode with salt/charcoal:
EARPIPCHAR Earthing with GI earth Pipe 4.5 m long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal and salt as required. SET 1 6855 998739
72 5.9 S/L 25mm x5 mm GI earth strip in ground:
EARGI25X5 Supplying and laying 25mm x5 mm GI strip 0.50 metre below ground as strip earth elctrode including soldering etc.as required Metre 5 144 998739
73 5.15 P/F 25 mm x 5 mm GI earth strip in surface/recess:
EARGISTSUR Providing and fixing 25 x 5 mm G.I. strip on surfaceor in recess for connection etc.as required Meter 5 244 998739
74 5.18 P/F 6 SWG GI loop earthing wire in surface/ recess:
EARGIWARSUR Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Meter 30 42 998739
75 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, shuttering and finishing:sunken floor etc., up to floor five level, excluding the cost of centering,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,buttresses, string or lacing courses,
4.2.3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 10.465000000000002 11216.76 995454
Quoted Percentage (in Figure) 0
Total Read Out Price (Rs.): Part-A
NOTE:The above cost is exclusive of GST. GST will be paid extra as applicable corresponding to the HSN/SAC code.
Document Code No.:NESH/CSM/1500-1143/BPS (VOL-IC) Annexure-I to Schedule - 1 of BPS, Vol-IC
Name of Work: Construction of RRM wall on the valley side of Gantry-1 (under crossing) of 132kV Khandong-Khliehriat-1 at NEEPCO substation Khandong, Dima Hasao, Assam
NON-SCHEDULED Items
Bidder’s Name and Address (Sole Bidder) :
Name : C&M Deptt.
Address : Power Grid Corporation of India Ltd.,
NERTS, Lower Nongrah, Lapalang
Shillong - 793006
S N Item Ref. No. Description Unit Quantity Rate (in figures) Amount in Rs. (In Figure) SAC (Service Accounting Codes) Whether SAC in column ‘….’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘---’ is confirmed. If not indicate applicable rate of GST #
PART B: ELECTRICAL PORTION (Supply of Other Items)
76 NS Supplying of ceiling fan(USHA/GEC/CROMPTON make) with blades, down rod etc. as required complete
1200 mm sweep EACH 1 995461
77 NS Supplying including fitting and fixing Exhaust fan in the existing hole on wall of following sweeps and making necessary connections etc. as required complete of make Bajaj/CGL/GEC or equivalent.
Domestic type , 300 mm sweep EACH 1 995461
78 NS Supply of bulk head fitting BJBE 19 of BAJAJ make or equivalent complete with all accessories including 9 W CFL lamp as required Each 2 995461
79 NS Supply of surface mounted aesthetic electronic pre-wired luminaires for wall/ceiling mounting of make Bajaj cat no. BJIR 140 or equivalent with 1no. TL'D' 40 W flourescent tube. (FL) Each 4 995461
Total Quoted Price in figure for Non-Scheduled Items (Part-B)
#NOTE: The quoted price must be exclusive of GST. GST will be paid extra as applicable corresponding to the SAC Code.
Document Code No.:NESH/CSM/1500-1143/BPS (VOL-IC) Annexure-I to Schedule - 1 of BPS, Vol-IC Direct Total Sole Bidder `
Name of Work: Construction of RRM wall on the valley side of Gantry-1 (under crossing) of 132kV Khandong-Khliehriat-1 at NEEPCO substation Khandong, Dima Hasao, Assam
(SUMMARY OF PRICE PROPOSAL)
Bidder’s Name and Address (Sole Bidder) : To:
Name : Power Grid Corporation of India Ltd., &
Address : NERTS, Lower Nongrah, Lapalang
Shillong - 793006
We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents. We have indicated the percentage and amount to the Total Estimated Cost as indicated in the “Bill of Quantity (BOQ) & Prices” covering the entire scope of works enclosed herewith as Schedule-1 AND Schedule-II. In case of discrepancy, the quoted percentage in words as per this Schedule shall prevail. Direct
SI. No. Item Description Amount
I TOTAL QUOTED PRICE AS CALCUALTED BY THE SYSTEM (IN FIGURE) Part A (Scheduled Items)
II TOTAL QUOTED PRICE AS CALCUALTED BY THE SYSTEM (IN FIGURE) Part B (Non-Scheduled Items)
III TOTAL QUOTED PRICE EXCLUSIVE OF GST (III=I+II) (IN FIGURE)
Note : * While quoting their Percentage component the bidder shall exclude applicable GST. GST shall however be indicated in Schedule-1 (Part-A and Part-B). GST shall be paid extra as applicbale correspnding to the SAC Codes indicated in Schedule-1.
Date: Printed Name :
Place: Designation :
Bid Proposal Sheet-Techno-commercial Part(BPS-Vol-IB)
:: COVER PAGE ::
Name of Package Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
NIT Ref.No.: NESH/CSM/1500-1215
Document Code.: NESH/CSM/1500-1215/BPS (VOL-IB)
Address of Purchaser/ Owner Sr. General Manager (C&M)
Power Grid Corporation of India Limited.
Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
Phone /Fax -0364- 2536406
E-mail: [email protected]
: Attachments : to Tecno-Commercial Part. General guidelines for filling up the Attachments SPEC. NO. NESH/CSM/1500-1215/BPS (VOL-IB)
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
Document Code.:NESH/CSM/1500-1215/BPS (VOL-IB)
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments -1 to 12 and Bid Form for Techno-commercial Part are included here.
3 Attachment 1 Bid Security : To be submitted as perproforma provided in the bidding document in physical form at POWERGRID, Shillong.
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format in physical form at POWERGRID, Shillong.
Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.
पावर ग्रिड कार्पोरेशन ऑफ़ इंडिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
Bidders Information
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Sole Bidder 1
Associates 2 or More
Enter following details of the bidder
Specify type of Bidder [Select from drop down menu] Sole Bidder
Name of Sole Bidder
Address of Sole Bidder
Other Partner 1
Address of other Partner 2
Any Tower Parts Manufacturer proposed other than the bidder [Yes / No] No
Proposed Tower Parts Manufacturer other than the bidder, if any [Maximum two nos.]
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) TECHNO-COMERCIAL Part 1 one 1 st 1 January
2 two 2 nd 2 February
BID PROPOSAL SHEETS for Techno-commercial Part(BPS-Vol-IB) 3 three 3 rd 3 March
4 four 4 th 4 April
Bid Proposal Ref. No. 5 five 5 th 5 May
Date : 6 six 6 th 6 June
Person to be contacted:
7 seven 7 th 7 July
Telephone No.: Fax No.
To: 8 eight 8 th January 8 August
Sr. General Manager (C&M) 9 nine 9 th 9 September
Power Grid Corporation of India Limited. 10 ten 10 th 10 October
Dongtieh, Lower Nongrah, Lapalang. 11 eleven 11 th 11 November
Shillong - 793006. 12 twelve 12 th 12 December
14 fourteen 14 th
Name of Package : Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station 15 fifteen 15 th
Dear Sir, Enter details Amendment here. 16 sixteen 16 th
Amendment No Date
0.0 We, the undersigned Bidder, have read and examined in detail the specification and Bidding documents including Amendment(if any) of the above Package and hereby propose for –Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station Nil Nil Package name:- "Fabrication after successful Proto-assembly, Galvanising, Inspection/Testing, Transit Insurance, Packing, Forwarding, Transportation, Supply & Delivery on F.O.R. destination basis (at Nirjuli Substation) of Towers of various design & their extensions including Stubs, Cleats & Plates, Nuts & Bolts for for use in the Diversion work of 132 kV Nirjuli – Ranganadi Transmission Line Section from Loc. No. 134 to 23 under deposit Work of POWERGRID as per Technical Specification and Bill of Quantity"
0.0 In accordance with Clause No.27.0.0 of SCC of the bidding documents, as per which the bid is required to be submitted by the bidder under “SINGLE STAGE – TWO ENVELOPE” bidding procedure, we hereby submit our Bid as Techno-Commercial Part and Price Part. This Bid Proposal Sheets contains the techno-commercial part.
0.0 Attachment to this Bid Form: Bank Draft 18 eighteen 18 th
In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments to this Techno-commercial Part of our Bid: Enter details of EMD/ Bid Security here. Pay Order 19 nineteen 19 th
Type of EMD Currency Amount Validity of EMD Name of Inssuing Bank
(a) Attachment 1 Bid Security - in orginial (hard copy/ Physical form), for sum of Rs. 78000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Online Rs. 78000 Bid Security - in orginial (hard copy/ Physical form), for sum of Rs. 78000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Bid security has not been submitted as our firm is registered under MSE. Valid MSE certificate being submitted instead of Bid Security, so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal and/or sent by mail. …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….
(b) Attachment 2 A power of attorney in orginial (hard copy/ Physical form) duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity. The soft/scanned copy is uploaded through the portal. Bid Security - in orginial (hard copy/ Physical form), for sum of Rs. 78000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal.
(c) Attachment 3 List of Sub-Contractors 26 th
(d) Attachment 4 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(e) Attachment 5 Work Completion Schedule. 29 th
(f) Attachment 6 Information regarding ex-employees of Employer in our firm. 31 st
(g) Attachment 7 Declaration regarding Social Accountability.
(h) Attachment 8 Information for e-payment, PF Details & declaration regarding Micro/Small & Medium Enterprises.
(i) Attachment 9 Additional Information.
(j) Attachment 10 Declaration regarding Social Accountability.
(k) Attachment 11 Checklist
0.0 We declare that the order, if awarded to us, shall be executed strictly in accordance with bid documents & Technical Specifications except for the variations & deviations all of which have been detailed out exhaustively in Attachment-5 of this proposal. We agree that any additional conditions, if found in the proposal other than those stated in Deviation Schedules, save those pertaining to any rebate offered, shall not be given effect to.
0.0 We declare that as specified in Clause 7.0.0 (SCC) of the Bidding Documents, prices/percentage quoted by us in the Price Bid shall be FIRM and shall not be subjected to any price variation or price adjustment under any circumstances, whatsoever, during the execution and completion of the works. All the prices in the Price Bid and terms & conditions of this proposal i.e. Techno-Commercial Part are valid for a period of Six (6) calendar months from the date of opening .
0.9 We confirm that except as otherwise specifically provided our Bid Prices in Price Bid include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities.
0.9 We have studied the relevant clauses of the bidding documents relating to Taxes & Duties and we hereby, declare that if any income-tax, surcharge on income-tax or any other corporate tax is attracted under the law, we agree to pay the same.
0.0 We declare that the order, if awarded to us, shall be executed strictly in accordance with bid documents & Technical Specifications except for the variations & deviations all of which have been detailed out exhaustively in Attachment 4 to BPS (Vol-IB) of this proposal. We agree that any additional conditions, if found in the proposal other than those stated in Deviation Schedules, save those pertaining to any rebate offered, shall not be given effect to
0.0 BID GUARANTEE (Attachment-1): Enter details of EMD/ Bid Security here.
0.9 Bid Security - in orginial (hard copy/ Physical form), for sum of Rs. 78000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. EMD No. and Date / NSCIC Certificate No. & date of Issue. Amount (in Words) Type of EMD / NSIC Validity of EMD / NSIC Certificate
The same has been submitted in original and two copies of the original, as per the following details :
Form of Bid Guarantee/ Bid Scurity/ EMD/ NSIC Bid Guarantee No./ NSIC No. and Date Value of Bid Guarantee Valid upto and Including
If we fail to keep the bid valid as aforesaid or make any modifications in the terms and conditions of the bid which are not acceptable to POWERGRID, We agree that POWERGRID shall, without prejudice to any other right or remedy, be at liberty to forfeit the said Bid Guarantee absolutely. Should this bid be accepted, we hereby agree to abide by and fulfill all the terms, conditions and provisions of the aforesaid documents. If, after the bid is accepted, we fail to commence the execution of the works as provided in the Conditions, We agree that POWERGRID shall without prejudice to any other right or remedy be at liberty to forfeit the said bid Guarantee absolutely.
We have also ensured that the above bid guarantee furnished by us is in line with the bidding documents and complete in the following respects:
(i) Value of non-judicial stamp paper, purchased in the name of executing bank, is as per Stamp Act.
(ii) Power of Attorney no. and date as well as signature and full name & designation of executant along with Bank's stamp.
(iii) Signature, full name, designation and address of witness.
(iv) Complete mailing address with Fax no. of the Head Office of the Bank is indicated.
(v)* Bid Guarantee is in the name of Joint Venture, covering all the partners of the Joint Venture and not in the name of partner(s) of the joint venture alone.
* Applicable only in case of a bid from a Joint Venture of two or more bidders. Strike out if not applicable.
0.0 DEVIATIONS (Attachment-4):
0.9 We declare that the works shall be performed strictly in accordance with the specifications and documents except for the variations and deviations, all of which have been detailed out exhaustively in the Attachment-4, irrespective of whatsoever has been stated to the contrary elsewhere in our Bid.
0.0 ADDITIONAL INFORMATION
6.1 In addition to the information called for in these proposal sheets, we have included with this Bid, information as listed in Attachment-9. We further confirm that such additional information does not imply any additional deviation beyond those covered in Attachment-4 and in case of any contradiction between these additional information and other provisions of Bid, the latter will prevail.
0.0 LIST OF SUB-CONTRACTORS
7.1 We have filled in the Attachment-3 regarding the list of sub-contractors.
0.0 We confirm that we stand committed to comply with all requirements of Social Accountability Standards i.e. SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records. The declaration Form in this regard is enclosed at Attachment-7.
0.0 WORK SCHEDULE
If this bid is accepted by you, we agree to complete the entire work in accordance with the Schedule indicated in relevant Clause of Special Conditions of Contract (SCC). We fully understand that the time schedule stipulated in bid documents is the essence of the Contract. The completion schedule of various major key phases of the work is indicated in the Attachment-6.
0.0 CONTRACT PERFORMANCE GUARANTEE
We further agree that if our proposal is accepted, we shall provide a contract performance guarantee as per relevant clause of SCC, Vol-IA and enter into a formal agreement with you within 30 (Thirty) days from the date of Notice of Award of Contract.
0.0 INFORMATION REGARDING EX-EMPLOYEES OF POWERGRID
We have furnished in the Attachment-6, information regarding Ex-employees of POWERGRID who had retired/resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us.
0.0 We, hereby, declare that only the persons or firms interested in this Bid as principals are named herein and that no other persons or firms other that those mentioned herein have any interest in this Bid or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other persons, firm or party likewise submitting a Bid and that this Bid is in all respect for and in good faith, without collusion or fraud.
Dated this 00/01/1900
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : Printed Name :
Place : Designation :
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-1 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Bid Guarantee)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
Bid Security - in orginial (hard copy/ Physical form), for sum of Rs. 78000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Bid Security - in orginial (hard copy/ Physical form), for sum of Rs. 78000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-2 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Power of Attorney)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We have enclosed copy of the power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-3A to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Qualifying Requirement Data)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
For our Qualifying Requirements Data, please refer ANNEXURE-A (QR) of SCC & Scanned copies of documents furnished in support of qualifying requirement.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-3 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(List of Sub-Contractors)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
The following is list of our Sub-Contractors proposed to be engaged by us for the above work in the event of award on us.
Sl. No. Name & Address of Sub-Contractor Nature of Work
Date : Printed Name
Place : Designation
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-4 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Alternative, Deviations and Exceptions to the Provisions)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
A) COMMERCIAL DEVIATIONS/EXCEPTIONS
Sl. No. Reference clause in the Specifications Statement of Deviation Cost of withdrawal of the deviation
B) TECHNICAL DEVIATIONS/EXCEPTIONS
Sl. No. Reference clause in the Specifications Statement of Deviation Cost of withdrawal of the deviation
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-5 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Work Completion Schedule)
Bidder’s Name and Address (Sole Bidder) : To,
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We hereby declare that the following Work Completion Schedule shall be followed by us for the subject Package i.e.,Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
Sl. No. Description of Work Period in Weeks from the effective date of Contract
1 Mobilization of work:
2 Source identification of materials:
3 Approval of above:
4 Commencement of work:
5 Completion of Work:
Date : Printed Name :
Place : Designation :
Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-6 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address (Sole Bidder) : To
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-7 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Declaration regarding Social Accountability)
Bidder’s Name and Address (Sole Bidder) : To
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-8 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)
Bidder’s Name and Address (Sole Bidder) : To
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.
1. Name of the Supplier/ Contractor in whose favour payment is to be made
2. Address with PIN Code and State
Registered Office:
Correspondence Address:
3. Status – Company/others
[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]
4. Permanent Account (PAN) No.
5. GSTIN Numbers
I. GSTIN in the Sates/UT from where the supply of goods take place
Name of the States/UT GSTIN number
II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)
Name of the States/UT GSTIN number
9. PF Registration No. of the Company
10. PF Regional Office covered (with Address)
11. Name of Contact Person
12. Contact Details
13. Bank Details for Electronic Payment
Name of the Bank:
Address of Branch:
Saving Account:
Current Account:
14. 9 digit MICR code printed at bottom in middle, next to cheque no.
15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-9 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
(Additional Information)
Bidder’s Name and Address (Sole Bidder) : To
Sr. General Manager (C&M)
Name: Power Grid Corporation of India Limited.
Address: Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We have enclosed with our proposal the following additional information
Sl. No. Breif Description of Information Ref. & Page No.
Date : Printed Name :
Place : Designation :
Note :(i) Continuation sheets of like size and format may be used as per the Bidder's requirement and shall be annexed to this Schedule.
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB)
Document Code: NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-10 to BPS-Vol-IB
PACKAGE: Repairing & Maintenance Works of Residential Buildings at 132 kV Aizawl Substation under O&M
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We confirm that Bid Form and Its Attachments in the Second Envelope have been filled up by us as per the provisions of the Instruction to Bidders / SCC. Further, we have noted that the same shall be evaluated as per the provisions of the Bidding Documents.
Date : Printed Name :
Place : Designation :
Document No. NESH/CSM/1500-1215/BPS (VOL-IB) Attachment-11 to BPS-Vol-IB
Package: Construction of balance work of boundary wall, Security room and Gate at POWERGRID, Namsai Sub-Station
Bidder’s Name and Address (Sole Bidder) : To:
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
Phone /Fax -0364- 2536406
Sl. No. Item Description Reference Declaration (Strike out whichever is not applicable)
1 Bid Guarantee enclosed in separate sealed envelop (one original plus two copies) & submitted in physical form Clause No.2.0.0, SCC, Vol-1A
2 Commercial deviation schedule filled in Attachment-4, BPS, Vol-IB
3 Technical deviation schedule filled in Attachment-4, BPS, Vol-IB
4 List of Subcontractors schedule fillid in Attachment-3, BPS, Vol-IB
5 Additional information included with this Proposal Attachment-9, BPS, Vol-IB
6 Work schedule filled in Attachment-5, BPS, Vol-IB
7 Schedule on information regarding Ex-employees of POWERGRID in the firm filled in Attachment-6, BPS, Vol-IB
8 Declaration Regarding Social Accountability Attachment-7, BPS, Vol-IB
Date : Printed Name :
Place : Designation :
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Price_Schedule.xls
xls • 0.34 MB
1- Main Cover Page.doc
doc • 0.12 MB
2- Detail NIT-1500-1215.doc
doc • 0.22 MB
First Envelope and Bid Forms.xls
xls • 0.32 MB
DC-5010-CIVIL.pdf
pdf • 0.27 MB
GCC-CIVIL_AMDT-IX.pdf
pdf • 0.90 MB
GCC_CIVIL_AMD-I.pdf
pdf • 0.01 MB
GCC_CIVIL_AMD-II .pdf
pdf • 0.01 MB
GCC_CIVIL_AMD-III.pdf
pdf • 0.01 MB
GCC_CIVIL_AMD-IV.pdf
pdf • 0.01 MB
GCC_CIVIL_AMD-V.pdf
pdf • 0.01 MB
GCC_CIVIL_AMD-VI.pdf
pdf • 0.49 MB
GCC_CIVIL_AMD-VII.pdf
pdf • 0.16 MB
GCC_CIVIL_AMD-VIII.pdf
pdf • 0.17 MB
Thumbs.db
db • 0.12 MB
1. SCC-1500-1215.doc
doc • 0.39 MB
Annex-A-QR.docx
docx • 0.02 MB
Annexure-C-(SCC)_EMD-BG_Format.doc
doc • 0.03 MB
Annexure-D-(SCC)_CPG-BG.doc
doc • 0.04 MB
Annexure-E of SCC.doc
doc • 0.03 MB
Annexure-F - Purchase Preference.docx
docx • 0.02 MB
Annexure-G Safety.docx
docx • 0.02 MB
Annexure-H Purchase preference to MSE.docx
docx • 0.02 MB
Attachment-I-(SCC)_Affidavit for self-certification.DOCX
docx • 0.02 MB
Form No 21 Authorization certificate issued by Domestic .docx
docx • 0.02 MB
Form No 22 Authorization certificate issued by Dome - Copy.docx
docx • 0.02 MB
Undertaking DMI&SP Policy.docx
docx • 0.02 MB
Drawing_Boundary Wall.pdf
pdf • 0.68 MB
Drawing_CONCERTINA.pdf
pdf • 0.22 MB
Drawing_Electrical Layout.pdf
pdf • 0.18 MB
Drawing_Security Room Gate Details.pdf
pdf • 0.80 MB
TS.pdf
pdf • 0.83 MB
Standard Field Quality Plan Civil Works for Site Packages Revision 04.pdf
pdf • 2.22 MB
STC.pdf
pdf • 0.20 MB
~$ SCC-1500-1153.doc
doc • 0.00 MB
~$ SCC-Const of Open Shed.doc
doc • 0.00 MB
~WRL3876.tmp
tmp • 0.38 MB
~$ Main Cover Page.doc
doc • 0.00 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .