Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.0 LAccepted-AOC 39 39 THANGAMAPURI PATTINAM METTUR DAM 636402 | SALEM | TAMIL NADU | 636402 | ₹5.0 L Quoted ₹4.4 L | 1 | Accepted-AOC L1 |
| 2 | 2₹4.7 LRejected-AOC 11 17A 4 MADILINE OPPOSITE SALEM CAMP PO METTUR DAM 636 456 | SALEM | TAMIL NADU | 636456 | ₹4.7 L | 2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | BHARATH ENGINEERING WORKS L1 | LENIN ENGINEERING WORKS L2 |
|---|---|---|---|---|---|
| 1.00 | Charges for dismantling the knife edge gate valves from Tramp iron spout assembly and assembling back. | 8 | Nos | 5,000 ₹40,000 | 5,500 ₹44,000 |
| 2.00 | Complete overhauling of knife edge gates valves(Two valves/ mill) | 8 | Nos. | 6,000 ₹48,000 | 6,200 ₹49,600 |
| 3.00 | Charges for cleaning, surface, edge preparation, metal filling, cutting MS plate to the required size 300x300x40mm thick, and welding the gap in between mill base and MS Plate | 4 | Nos. | 12,500 ₹50,000 | 13,000 ₹52,000 |
| 4.00 | Charges for pre heating and welding the cracked portion of mill base outside the reject chute mouth area | 4 | Nos. | 12,000 ₹48,000 | 13,000 ₹52,000 |
| 5.00 | Charges for cutting the existing worn out under bowl door frame & door and welding both inside and outside of the door frame and fixing the under bowl door without any hot air leakage in mill. | 4 | Nos. | 24,000 ₹96,000 | 25,000 ₹1 L |
| 6.00 | Cost of Special Welding electrodes (ESA 802 or Equivalent) | 16 | Kgs | 7,000 ₹1.1 L | 7,500 ₹1.2 L |
| 7.00 | Cutting gas | 1.6 | Sets | 3,800 ₹6,080 | 4,000 ₹6,400 |
| 8.00 | Cost of MS Welding electrodes | 32 | Kgs | 460 ₹14,720 | 500 ₹16,000 |
| 9.00 | Cost of 300NB Power cylinder seal with “O “ ring | 3 | sets | 3,500 ₹10,500 | 4,000 ₹12,000 |
| 10.00 | Cost of 200NB Power cylinder seal with “O “ ring | 5 | Sets | 2,200 ₹11,000 | 2,500 ₹12,500 |
Tender Value
Refer Docs
EMD Value
₹4,600
Closing Date
1 Dec 2025, 2:00 pmClosed
Superintending Engineer /Mechanical-I/MTPS-I
Office of the Superintending Engineer / Mechanical -I Mettur Thermal Power Station- I Mettur Dam-636406
MTPS I Mill Plant Unit III Overhauling of tramp iron chute knife edge gate Valves Strengthening of reject chute mouth area at under bowl and repairing the cracks of tramp iron chute outside the mill base of mills Renewal of the worn out Mill
2025_EB_624107_1
CE / MTPS-I / SE / M-I / MP /OT.397 / 2025-26
Open Tender
Power/Energy Projects/Products
15 days
Mettur Thermal Power Station-I / Mettur Dam
As per the Tender Specifications
4 documents required · 4 mandatory
₹0
₹4,600
Yes
27 May 2026
17 Nov 2025
2 Dec 2025
17 Nov 2025
1 Dec 2025
17 Nov 2025
Amount
Charges for dismantling the knife edge gate valves from Tramp iron spout assembly and assembling back.
Complete overhauling of knife edge gates valves(Two valves/ mill)
Charges for cleaning, surface, edge preparation, metal filling, cutting MS plate to the required size 300x300x40mm thick, and welding the gap in between mill base and MS Plate
Charges for pre heating and welding the cracked portion of mill base outside the reject chute mouth area
Charges for cutting the existing worn out under bowl door frame & door and welding both inside and outside of the door frame and fixing the under bowl door without any hot air leakage in mill.
Cost of Special Welding electrodes (ESA 802 or Equivalent)
Cutting gas
Cost of MS Welding electrodes
Cost of 300NB Power cylinder seal with “O “ ring
Cost of 200NB Power cylinder seal with “O “ ring
Charges for consumables and T& Ps
LENIN ENGINEERING WORKS (BID ID -1524270)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_746273.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid