Supply of Furniture at Maharaja Library, Chaura Rasta, Jaipur.

Amount

Providing & fixing of Book counter of Size 1800mmX600mmX1200 mm with Top & shelves of 25mm Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked with screws and fittings wherever required, edges to be painted with polyurethane primer & Vertical support (Both sides & Front) with 18 mm Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer to be made with double board to make it 36 mm thick with fitting including 75 mm bright finished brass handles with screws, special quality 40 mm chromium plated brass cupboard locks of six levers, chromium plated brass 50 mm cupboard or wardrobe knobs, powder coated telescopic drawer channels 300mm long, sliding arrangement in racks/ cupboards/ cabinets shutter by P/F stainless steel rollers to run inside C or E aluminum channel section (The payment of C or E channel shall be made separately), magnetic catcher in cupboard / ward robe shutters(Best make of approved quality), nd class teak wood lipping/ molded beading or Taj beading of size 18X5mm fixed with wooden adhesive Fittings including necessary screws etc. complete in all respect according to reference picture & as per direction of Engineer-in-charge. All fittings should be of standard make like Hettich, Godrej or similar.

Supply of MS free standing storage rack size 36x28x72 inch of Standard make like Godrej or similar with heavy duty angle frame (Powder coated) and with 5 equal height shelves with bottom platform of 18 gauge and load capacity 50 kg of each shelf, complete in all respect according to reference picture & as per direction of Engineer-in-charge.

Supply of Floor mounting type MS Book shelf Size 66" X 33" X 13" with- 4 of Standard make like Godrej or similar with equal height compartments having CR Sheet 0.8mm thick and 18 gauge door frame with 3 mm thick Glass shutters, and fittings etc. complete in all respect according to reference picture & as per direction of Engineer-in-charge.

Supply of standard make like Godrej or similar Storwel plain shall have an overall size of 19"x 36"x 78" with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It shall have 4 no.s full shelves. A4 size box file(85 W x 285 D x 345 H mm) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. There shall be 5 loading levels in storewel plain.

Supply of Teak Wood catalogue cabinets size 1200mm x 600mm x 1500mm with 50 no sliding drawer 5 " x 5 " with 25 mm thick including 2nd class teak wood lipping/ molded beading or Taj beading of size 18X5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges and Melamine polishing on wood work (one or more coat), including bright finished brass handles, special quality chromium plated brass cupboard locks of six levers, chromium plated brass 50 mm cupboard or wardrobe knobs, powder coated telescopic drawer channels 300mm long , sliding arrangement by P/F stainless steel rollers to run inside C or E aluminum channel section sliding channel, etc. including necessary screws etc. complete in all respect as per reference Image & as per direction of Engineer-in-charge. All fittings should be of standard make .

Supply of PVC chair as per standard specification of standard make like Neekamal , Kisan, Cello or similar .

Supply of MS frame bench size 1400 x 350 x 450 mm of built up tubular frames (Hot finished welded type tubes ) including cutting, hoisting fixing in position and applying a priming coat of approved steel primer and enamel paint of desired shade/ colour, welded and bolted including special shaped washers and wooden battens on top with Melamine polishing on wood work (one or more coat) in etc. Complete in all respect as per reference Image & as per direction of Engineer-in-charge. All fittings should be of standard make.

Supply of wooden fumigation chamber in wood of size (1200x600x1500mm) including polish, furniture accessories of standard make and complete in all respect as per reference Image & as per direction of Engineer-in-charges.

Supply of modular wooden Computer Office Table Size: (1500x600mm ), The table top made out of post formed on 25 mm thick particle board with 0.7mm thick Cervical sheet in half round post formed finish on the front and rear side, matching color compensating laminate fixed on the bottom side. Other two sides are edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. The table top of size 900 x 600mm(Waxed) would be made out of post formed on 25 mm thick particle board with 0.7mm thick Cervical sheet in half round post formed finish on the front and rear side, matching color compensating laminate fixed on the bottom side. Other two sides are edge banded and duly sealed with 1.5 mm thick PVC edge banding of matching color with high pressure through feed machine. Complete in all respect according to reference picture & as per direction of Engineer-in-charge. All fittings should be of standard make.

Providing & Fixing Reading Counter approximately 4.5 mtr long with top made of factory made Pre-laminated 25 mm thick particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type all, of approved design, and edges sealed with water resistant paint and lipped with aluminum 'U' type edge beading all-round the shutter, including fixing with MS bracket approx. 21 number/ as per requirement and / as per design. The M S bracket includes angle cleat, grip strip, cadmium plated steel screws including fixing of aluminum hinges 100x63x4 mm etc. and Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required and enamel paint of approved shade / Colour. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Verticle partition (approx. 19 numbers) of 45 cm high at intermediate distance approx. 0.9 mtr made of factory made Pre-laminated 25 mm thick particle board flat pressed three layer or graded wood particle board with both side decorative finish. Counter complete in all respect according to reference picture & as per direction of Engineer-in-charge. All fittings should be of standard make.

Supplying of Reading table with 25 mm thick Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) and Steel work in built up tubular trusses (Hot finished welded type tubes) including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. Complete in all respect a as per direction of Engineer-in-charge. All fittings should be of standard make.

Type-1 (Size 1500x600x750)

Type-2 (Size 1500x450x750)

Type-3 (Size 2250x600x750)

LIFE STYLE INTERIORS