Providing And Fixing Of Open Air Gymnastic Equipments, PCC Benches and New Children Play Equipments In Green Belt Near house no.4780 DMC Chandigarh Under WDF

Providing and Fixing of Two sided Rotator Size:- Length – 1.7 m, Width – 0.48 m, Height - 1.31 m, Main pipe :- 114 mm X3mm Connected Pipe (Round):- 60mmX3mm, 33mmX3mm, Connected Pipe (Rectangle):- 60X40X3 mm, Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Functions: The Two Sided Rotator features two positions combining the standing and sitting rotators. The Twisting motion stretches the obliques and abdominal muscles and serves to align the spins and lower back. This exercise can be done with up to two people at a time, one in a sealed position, one in a standing position.

Providing and Fixing of Hip Twister Size:- Length – 1.31 m, Width - 0. 35 m, Height – 2.40 m, Main pipe :- 88 mm X3mm Connected Pipe:- 48mmX3mm, 32mmX3mm, Material: Pre Galvanized Mild Steel Paint: All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Functions: The Hip Twister Consists of a swivel stand which rotates as the arms and shoulders are held square in the overhead holds. Standing with the spine straight, rotate slowly to the stretch position, alternating directions. While rotating right, the left internal and external oblique are stretched, and to a lesser extent, the abdominal and extensor muscles. Reversing direction works the same muscles on the other side. This is not a power exercise, so it might take several minutes of easy repetitions to achieve the best results

Providing and Fixing of Horizontal Ladder The popular term "Monkey Bars", well describes this apparatus. It helps build the kind of agility and upper body strength exhibited by our primate friend. Monkeys and humans share a well developed grip and the teres major and latissimus dorsi muscles - all involved in hanging, swinging and pulling skills. Try swinging down the length of the bars, reaching and grasping, overhand, one bar after the other. Stronger and/or lighter individuals will be able to use more of a bent arm. You can also simply use the equipment for chin-ups, using a variety of grips. Also, try lifting the knees and legs while hanging, helping to build abdominal strength. Size:- Length – 3.03 mtr Width – 1.08 mtr Height – 2.4 mtr Main pipe :- 114 mm X3mm Connected Pipe:- 42mmX3mm, 33mmX3mm Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Functions: The Horizontal Ladder is a great fitness station for almost any age group! It is used by a wide range of fitness enthusiasts - from schools to military and many, many others. Its size and heavy-duty strength make it appropriate for both youth and adult use. The height is adjustable upon installation all the way up to 7' 6 1/2" (2.3m). The long-width crossbars and wide breadth (5'1/4" / 1.53m) of this station also makes this item wonderful for a broad variety of users.

Providing and Fixing of The Strength and Stretch Bars The assisted push-up is an effective overall upper-body strengthening exercise which exercises not only your chest, but your triceps, deltoids, biceps, back and abdominals as well. These are the same benefits achieved with regular push-up, the bars vary the resistance and allow additional repetitions without excessive strain. Assisted pull-ups exercises the same muscle groups required of chin-ups. Position yourself under the bar with the feet planted on the ground. Pull with the rowing action until the chin is above the bar. The resistance is controlled by the position of the feet and the chosen height of the bar. Additionally, all of the many exercises that can be done on a ballet bar can be practiced on the strength and stretch bars. These can include many leg strengthening exercises including alternating leg swings, lunges and deep knee bends. Size Length – 2.6 mtr, Width – 2.6 mtr, Height – 1.32 mtr, Main pipe :- 88 mm X3mm Connected Pipe (Round):- 32mmX3mm, Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Function - The Strength and Stretch Bars help develop arm and shoulder power with a variety assisted pulling and pushing exercises. The five bars are set at different heights providing a choice of resistance levels.

Providing and Fixing of Integrated Fitness Size Width – 2.608 mtr, Height – 2.45 mtr, Main pipe :- 88 mm X3mm Connected Pipe:- 48mmX3mm, 32mmX3mm, 25mmX3mm, Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized. Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Function – Integrated Fitness Apparatus is designed for to promote fun and fitness. It consists of multiple exercise challenges requiring the practice of balancing, climbing, strength and agility. The equipment requires resilient surfacing material underneath and covering a safety zone around the equipment. Consult the applicable playground safety guidelines.

Providing and Fixing Pull Up Bars/ Horizontal Bars To perform a pull-up or chin-up, hold onto the bar, use the arms to pull up until the chin is level with or above the bar. Lower again and repeat according to your capability. Pull-ups / Chin-ups can be done with two hand grips, forward or reverse, each strengthening different muscles. The forward bar grip (backs of hands facing you) places more emphasis on the trapezius and muscles of the back, whereas the reverse bar grip (or underhand grip) is narrower and places focus on the biceps. The pull-up bars can also host many more exercises, including shoulder and arm stretching, improving the grip, the hanging leg lift which strengthens the abdominal muscles. Additionally, simply hanging by the arms to stretch the lower back and align the spine is a great benefit to the lower back. Introduce yourself to all exercises gradually, avoiding undue stress. Slowly build the number of repetitions. Most people find chin-ups very difficult, especially those with higher body weight. As necessary, use the ground to help boost upward motion. Size Length – 2.4 mtr, Post diameter– 0.115 mtr, Height – 2.4 mtr Main pipe :- 114 mm X3mm, Connected Pipe:- 32mmX3mm, Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Function - The Pull Up Bars / Horizontal Bars are a military fitness training favourite! Chin-ups are one of the best tests of a person's strength to weight ratio -- a primary indicator of upper body strength.

Providing and Fixing of Waist stretcher Length – 1.60 mtr, Width – 0.50 mtr, Height – 1.15 mtr, Main pipe :- 88 mm X3mm Connected Pipe (Round):- 48mmX3mm, Connected Pipe (Rectangel):- 60X40X3 mm & 40X20X3 mm, Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. FUNCTIONS: The Waist Stretcher provides support while the muscles and tendons of the back and abdominal area are stretched. Lean backwards against the equipment, holding the side bars for support. Carefully increase the backward level of stretch. Relax into the stretched position. Also, lean across the apparatus forwards to gently stretch the lower back and decompress the spine.

Providing & fixing of Pommel Horse apparatus The resistance is controlled by the vertical force provided by the legs. The feet are planted on the ground. The more the feet are underneath the body the more support can be provided. Like the dips, push from a position with the elbows bent to a straight armed position. Focus on the extension of the triceps. The bars can also be used for angled push-ups and for abdominal exercises where the legs and feet are lifted from the ground to form an "L" position. Size:- Length – 2.16 mtr Width – 0.75 mtr Height – 1.00 mtr Main pipe :- 88 mm X3mm Connected Pipe (Round):- 48mmX3mm, 32mmX3mm Connected Pipe (Rectangel):- 60X40X3 mm Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. FUNCTIONS: The Pommel Horse apparatus features three exercise positions with bars which allow assisted dips to be performed. Dips on the Parallel Bars are very difficult for most people, so this apparatus is designed to preserve the value of the important triceps and shoulder exercise for those who need less resistance.

Providing and Fixing of Precast concrete reinforced benches (Chair type) with backrest, manufactured by using M-30 grade of concrete & reinforced suitable to prevent damage during handling, transportation, execution & long use. The benches consist of 2 nos. L-shape support in gray/cement colour of thickness-100 mm, back height-1000 mm & front height-450 mm, base width-620 mm, and 5 nos. reinforced concrete planks in red colour of size 1500X100 mm X 50mm and 1 no. of reinforced concrete plank of size 1500X200X50 mm all parts are joined together with galvanized nuts & bolts of suitable size. All bolts are sealed after assemble. Seating length of the Bench-1500 mm. Seating height of the Bench-450 mm. Seating back height of the Bench-1000 mm.

SWINGING LOOP RUNG Rec. Age : 5-14 yrs. The area : 3.2m X 0.9m Safe play area : 4.2m X 1.9 m This is another kind of item that provides hanging as well as swinging experience to the children. The frame is fabricated out using 40 NB and 25 NB powder coated GI pipes. There are 09 triangular loops of 15 NB which are attached to the top pipe of the frame using ‘S’ hook. The ladder used is designed to the side support pipe itself.

Wide Slide: The Wide slide chute shall be made up of 4mm thick of Fiber reinforced plastic with self-pigmented. The Wave shape should be in such manner that it will not give any jerk or bump to the rider. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NB GI pipe.

DOUBLE SWING Age Group : 4-14 yrs. Product Area : 3.0m X 2.5m Safe play area : 4.0m X 3.5m In the double swing the leg support is made of 40 NB GI pipes and top pipes is of 50 NB. GI pipes with GI junction box with powder coating. The swing seat is made up of 10MM thick rubber belt. The belt seat is affixed on 6MM rubber coated GI chain. The wall bearing are mounted inside specially designed nylon clamp.

M.A.P.S (JUMBO 3X1) Sr. No. Description Quantity 1 Standard See Saw 1 2 Double Swing 1 3 Wave Slide 5’ ht. 1 Area : 4m x 4m Safe Area : 5m x 5m (Jumbo 3 X1) set consist of : Standard See Saw: This item provides a good entertainer for children. The seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 NB GI Pipe. The level is of 15 NB & 25 NB pipes. The bearing used is a heavy-duty bush type. Double Swing In the double swing the leg support is bending made of 40nnb GI pipes and top pipe is 50nb GI pipes with GI Junction box with powder coating. The swing seat is made up of 10mm thick rubber belt. The belt seat is affixed on 6mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. Wave Slide: The Wave slide chute shall be made up of 4mm thick of Fiber reinforced plastic with self-pigmented. The Wave shape should be in such manner that it will not give any jerk or bump to the rider. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NB GI pipe.

Please Enable Macros to View BoQ information