Pneumatic Impact Wrench 1/2 inch Square Drive. .

Special Eligibility Criteria

1. 1

   Material will be procured from OEM or authorized dealer only. Firm must comply to Annexure attached in the tender and upload a signed copy for the same.

   Document requiredConfirmation required
2. 2

   Procurement from (OEMs) manufacturers or authorized agent/dealer: 2.0 Either OEM should quote directly or OEM can authorize and give Tender Specific Authorization to its Agent / dealer to quote on their behalf. 2.1 The authorized dealer should submit valid tender specific authorization, along with the offer, failing which their offer will be liable to be passed over. 2.2 Trader / Authorized dealer should mention name of Manufacturer along with complete address for inspection of material at OEM Premises in line with Instructions to Tenderers and General Conditions of Contract VERSION 2024 or latest with all revisions and corrigendums issued before tender closing.

   Document requiredConfirmation required
3. 3

   Earnest Money Deposit (EMD): (1) EMD shall be submitted by tenderer as specified in tender schedule, along with their online offer. There shall be no exemption from submission of EMD for any tender or by any tenderer except those exempted. (2) Exemption to submit EMD will be given in the following cases : (a) Micro and Small Enterprises (MSEs) against UDYAM certification. (b) Other Railways and Government Departments. (c) Vendors registered with Railways for the trade group of the item tendered. (d) Vendors appearing on the approved vendor lists of RDSO, subject to approval status being valid on the date of tender closing.

   Document optional

Commercial-Compliance

1. 1

   The tender will be governed by Railway Board letter No.2020/RS(G)/779/ 2 dtd. 12/06/20 and 2015/RS(G}/779/5(Vol.l) dated 24/09/2020 & 2015/ RS(G)/779/5(Vol.III) dated 12.07.2020 for Public Procurement (Preference to Make in India). Since, there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class I local suppliers only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.

   Confirmation required
2. 2

   Warranty - The supplier shall provide a warranty period of not less than 12 months from the date of delivery for each pneumatic impact wrench supplied.

   Confirmation required
3. 3

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   Inspection shall be carried out by Third party Agency . Inspection place is to be indicated by tenderer with complete address.
2. 2

   SECURITY DEPOSIT (SD): 1.0 All successful tenderer shall deposit Security Deposit (SD) amount @5% of contract value rounded off to nearest higher Rs.10, subject to maximum Rs. 50 lakh for contract value upto Rs 50 Cr. In case of contract value above Rs 50 Cr. SD will be Rs 1 Cr. 2.0 There shall be no exemption from submission of Security Deposit (SD) for any tender or by any tenderer except following: i. The Contract value up to Rs.25 (twenty- five) lakh. ii. Other Railways and Government Departments. iii. PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them. iv. In tenders issued against PAC, OEM in whose favour PAC has been issued. v.Vendors registered with Railways for the trade group of the item tendered for orders valued up to their monetary limit of registration. vi. Vendors appearing on the approved vendor lists of RDSO/PUs/CORE, subject to approval status being valid on the date of tender closing. 3.0 Security Deposit (SD) shall remain valid for a period of 60 days, beyond the date of completion of all contractual obligations. 4.0 SD from successful tenderer should be received in purchase office within 21 days from the date acceptance letter issued by purchaser. In the event of successful tenderer (s) failing to deposit/submit SD in acceptable form within the prescribed period as aforesaid, the EMD submitted by such successful tenderer shall be automatically adjusted towards SD. In case where available EMD amount is less than required SD and the successful tenderer does not deposit the balance SD amount within stipulated time, then EMD shall be forfeited and case be dealt with as that of withdrawal of offer by the tenderer.
3. 3

   SECURITY DEPOSIT (SD): 5.0 Wherever SD has been exempted, for any reason, and the supplier fails to supply goods as per conditions of contract, as amended from time to time, Purchaser shall have right to levy damages from the supplier for failing to comply with the contractual conditions, not by way of penalty, an amount equal to SD amount, as would have been applicable if the contract was with a non- exempted vendor. These damages shall be treated as recoveries outstanding against the vendor and dealt with accordingly. 6.0 Apart from claiming damages from vendors, in case of failure to comply with the contractual obligations, Railways shall record poor performance of the vendors for taking suitable penal action. 7.0 SD can be submitted in following format: a. DD in the name of Dy. FA&CAO/WS/Parel/Western Railway. b. Fixed Deposit Receipt duly discharged and stamped in favour of Dy. FA&CAO/WS/Parel, Western Railway. c. Bank guarantee: In case Bank guarantee is submitted by supplier/ contractor, the same should be in the proper prescribed format for BG as per Annexure available on web site www.ireps.gov.in website link Western Railway/PCMM. The stamp duty shall be @Rs.5/- per thousand or part thereof for the amount secured for such deed. The title holder of the BG shall be President of India acting through the Dy. FA&CAO/WS/Parel, WESTERN RAILWAY. 8.0 Risk Purchase clauses shall not be applicable.
4. 4

   MSE Clause:- Please indicate whether you are a Micro & Small Enterprises (MSE) with UDYAM certificate. Please also indicate whether the Enterprise is owned by SC/ST or women. Bidder is also required to submit UDYAM Certificate. The 25 % quantity shall be considered for award to MSEs including quantity for women owned MSEs & for SC/ST owned MSEs as per extant rules. The benefit of MSE policy shall only be considered if valid UDYAM certificate. If documents are not uploaded, this benefit will not be given to tenderer. Classification of Enterprise as Micro, Small or Medium Enterprise shall only be considered on the basis of UDYAM Certificate.

   Document optionalConfirmation required
5. 5

   LD Clause: Recovery of Liquidated Damage (LD) shall be levied @1/2% (half percent) of the price of store per week or part of the week during which delivery is accepted and the upper limit for recovery of Liquidated Damages in supply contract is 10% (ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.
6. 6

   Road Delivery:- In case of Road delivery, the date of delivery at destination (Consignee end) shall only be treated as delivery date irrespective of F.O.R./F.O.T. condition mentioned elsewhere in the contract/tender.
7. 7

   Firm to note that single use plastic should not be used in packing, if material to be supplied otherwise it will be rejected.Collection of non-biodegradables old waste after successful delivery of the product/material from consignee place will be arranged by the supplier..
8. 8

   LAND BORDER CONDITION (A): Attention of the bidders is drawn to Special conditions regarding restrictions on procurement from a tenderer (bidder) of a country, which shares a land border with India, attached with this tender. Bidders should note that compliance to LAND BORDER CONDITION (B) of this tender schedule is mandatory. Bidders are required to attach evidence of valid registration, if applicable to them. Non- compliance shall result in summary rejection of their offer. Any false declaration and non-compliance of the above would be a ground for immediate termination of the contract and further legal action in accordance with the laws.

   Document optional
9. 9

   LAND BORDER CONDITION (B): "I have read and understood Special conditions regarding restrictions on procurement from a tenderer (bidder) of a country, which shares a land border with India, attached with this tender. I certify that this bidder is not from such a country or, if from such a country, has been registered, with the Competent Authority. I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached.

   Confirmation required
10. 10

    Western Railway GSTN No. 27AAAGM0289C2ZI

    Confirmation required

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.