Provn of parking shed with allied services near bldg No. T-1, Provn of venetian blinds and aluminium fly proofing windows in station gymnasium, Provn of cubicals for admin section, Provn of false ceiling and PVC floor at Offrs mess gymnasium and Prov

Amount

Surface dressing n exc 15 cm deep in loose/soft soil all as specified and directed

Excavating in trenches not exceeding 1.5 mtr wide and 1.5 mtr deep and getting out in hard / dense soil all as specified and directed

M & L cement concrete 1:4:8 type D - 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed

M&L Mild steel TMT 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and directed

M&L Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and directed

M & L for RCC nominal mix Type B-1 ,1:2:4 (20mm graded stone aggregate) in foundation, footing ,plinth beam all as specified and directed

M & L for RCC nominal mix Type B-1,1:2:4 (20mm graded stone aggregate) in columns all as specified and directed

M & L for RCC nominal mix Type B-1,1:2:4 (20mm graded stone aggregate) in beams all as specified and directed

M & L for RCC nominal mix Type B-1,1:2:4 (20mm graded stone aggregater) in roof slabs , kitchen platform etc all as specified and directed

M & L for form work to sides of footing, plinth beams, bases of column all as specified and directed

M & L for form work to sides of column all as specified and directed

M & L for form work to sides of suspended slabs, roof n.exc 200 mm thick all as specified and directed

M & L for form work to sides of suspended roof beams,lintels all as specified and directed

M&L Moorum/red bajri filling in floor or pavings/ roads, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering. (out side of MOD land) all as specified and directed

Returning filling in including spreading, levelling and ramming in layers not exceeding 25 cm each layers in soil all as specified and directed

Removing excavated soil to a distance exc 250 mtrsbut nexc 1000 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed

Hardcore of guage n.exc 63mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surface all as specified and directed

M & L for PCC 1:2:4 Type B-2(40 mm graded stone aggregate) all as specified and directed

M & L brick work with sub class B bricks straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:6 all as specified and directed

M & L for Damp proof course 25mm thick in cement mortar 1:2:4 type B-0 horizontal or vertical surfaces including necessary formwork all as specified and directed

M & L 15 mm thick plastering on fair faces of brick work finished even and smooth in CM (1:4) without using extra cement all as specified and directed

M & L 15 mm thick plastering on other than fair faces of brick work finished even and smooth in CM (1:6) without using extra cement

M & L 10 mm thick plastering on ceiling finished even and smooth in CM (1:4) without using extra cement all as specified and directed

M & L for preparation of New plastered surfaces and applying two coat of apex weather coat paint over a one caot of primer after smoothening of surfaces complete of externally all as specified and directed

M & L for preparation of New plastered surfaces and filling up undulation and applying one layers readymixed wall putty (Birla, Asian & equilevent) on entire surface of wall/ceiling etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one coat of primer after smoothening of surfaces complete of wall and ceilling all as specified and directed

M&L for complete removal of existing treatment, filling up undulation and applying one layers readymixed wall putty (Birla, Asian & equilevent) on entire surface of wall/ceiling etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one caot of primer after smoothening of surfaces complete of wall and ceilling all as specified and directed

M&L for complete removal of existing treatment and applying two coat of apex weather coat paint over a one caot of primer after smoothening of surfaces complete of externally all as specified and directed

M & L for Dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over 15mm thk screed bed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M & L for Light shade Virified Ceramic tiles 10 mmthick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over 15mm thk screed bed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed

M&L for Rendering 10mm thick in cement mortar (1:4) on concrete surfaces mixed with water proofing compound and finished the surface even & smooth with out using extra cement all as specified and directed

Supply only integral water proofing compound.

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as given her in after:- (a) Bituminious primer @ 0.3 ltr per Sqm confirming to IS 3384-1986 on roof surfaces prior laying APP (b) providing water proofing treatment with 3mm thick weighing not less than 3.5 kg/sqm APP modified bituminous membrane reinforced with non voven polyester mat of wt 160 gms/sqm as centre core applied by thermo fusion using LPG torch on the bottom portion of the membrance with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Applying one coat of bituminous aluminium paint @ 100 gms per sqm over membrane. Note: The contractor shall submit TEN YEARS guarantee of WPT from the certified date of completion and also submit security deposit for the same @2.5% of total work done amount of WPT.

M & L for demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars,etc, but excluding ashlarfacings, dressed stonework and precast concrete articles all as directed

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level, for kitchen slab) all as directed

S & F 30 mm thick Flush shutters, solid core construction, with particle board core faces is covered with decorative face veneer with lipping/frame to match decorative type all as specified and directed

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 sqm but not 4 Sqm each all as specified and directed

Cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 exceeding one brick wall and not exceeding two brick wall all as directed

S & F 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a).

M&L 2nd class HW plain solid straight chowkhats and frames worught framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F 100mm long Butt hinges, extruded Stainless Steel with galvanished mild steel hinge pin anodised and fixed

S&F 150 mm size Stainless steel barrel tower bolt of extruded section .Make ISI Marked

S&F 300 mm Stainless steel sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections

S & F 150 mm long Extruded Stainless steel handles, fabricated type,Make: ISI Marked

M&L mild steel work as in wind ties,hold fast and brackets and similar articles for holding boarding etc complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding.

M&L 2 coat of synthetic enamel painting to wood and wood based material surfaces exc 10cm width or girth over a one coat of pink primer including preparation of surfaces all as specified and directed

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed

M&L in repair for 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cup board shutters, partitions, shelves, cupboard drawers, pelmet boxes and similar work

M&L for external teak wood lipping, 6mm thick fixed with nails for particle board of 12 or 18/19 mm thick all as directed

S & F second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area exc 6 Sq cm and nexc 13 Sq. cm all as specified and directed

S & F in repair hasp and staple of size 125 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hing plate and fixed with screws all as directed

Taking down aluminium frame with shutter (without taking off shutter from the frame) nexc 2.4 Sqm each including all fitting/mongries

S & F powder coated sections for doors and sliding windows including frames of size as approved and fixed all as specified and directed (Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item deemed included for necessary jointing cleats, glazing clips, aluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.)

S & F Mortise lock of Godrej all as specified and directed by Engr-in-Charge.

M&L Rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I all as specified and directed

M&L GI tubes medium grade 20mm bore fixed complete to wall or laid in floor. complete all as specified and as directed.

S & F GI tubing 15 mm bore medium grade with all fittings & fixed complete to walls or laid in floors all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick/stone wall

S & F PVC connections suitable for 15 mm dia pipe with PTMT nut of lenth 450 mm.

S & F PVC (SWR) floor trap of 100 mm outlet plain with grating including jointing with solvent cement.

S & F 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc.

S&F PVC flexible downtake waste pipe 32/40mm dia for WHB or sink

S&F waste coupling of stainless steel with brass nut suitable for Wash Hand Basin

S&F 110mm PVC (SWR) bend with oval access door

S&F 110mm PVC (SWR) pipe single/double socket in any length with rubber ring joint, laid in trenches or in floor

S&F 150mm PVC (SWR) bend with oval access door

S&F 150mm PVC (SWR) pipe single/double socket in any length with rubber ring joint, laid in trenches or in floor

M & L for plain cement concrete Type C-2, 1:3:6, 100mm thk (using 40 mm graded granite stone aggregate) in plinth protection all as specified and directed

M&L granite (of any type or any position) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cement using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6) necessary cutting, notching etc for sink all as directed

Chamfer, splays, or arris in facework of granite exc 15mm wide but nexc 50mm wide all as directed

S & F under counter wash hand basins,( oval type) white of size 420mm X 590 mm X195mm (Make -Jaguar, Model No CNS-WHT-705) including waste coupling fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe all as directed

S & F Single lever extended Basin Mixer (height 85 mm) with popup waste system with 450mm long braided hoses of Make Jaguar, Model No. FUS-29052B all as specified and directed by Engr-in-Charge.

S & F Mirror with plastic cabinet of size 550 mm x 400 mm x 75 mm single door as per approved sample. Make: Prayag , Neelkamal

S & F towel rail with towel rack and hanging hooks at the end made of single piece of length not less than 600 mm of stainless steel material .Make: Jaguar, Prayag or equivalent as approved by GE

S & F Single lever concelled shower mixer for connection to overhead shower of Make Jaguar, Model No. SOL-6139 all as specified and directed by Engr-in-Charge.

S & F Bib cock (straight line model) with wall flange Make Jaguar, Model No. FLR-5047N all as specified and directed by Engr-in-Charge.

S & F Angular stop cock with wall flange Make Jaguar, Model No. FLR-5053N all as specified and directed by Engr-in-Charge.

S & F health faucet including flexible pipe and MS anodised hanging device all as directed. Make : Jaguar or equivalent.

S & F single piece WC with PP seat cover, hinges, fixing accessories set, cistern fittings of size 655X365X 755 mm with P trap-180mm Make- Jaguar, Model No. LYS-WHT-38851Pall as specified and directed by Engr-in-Charge.

S & F ball brass valves with brass rod, high pressure with polythelene float and fly nut complete, screwed for iron pipe or for brass ferrule of 20mm dia all as directed

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed all as specified and directed

S & F stop cocks 15 mm bore, chromium plated , fancy type screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed

S & F overhead shower 300 X 300mm square shape single flow (body & face plate stainless steel with crome finish) with rubit cleaning system of Jaguar Make & Model No OHS-CHR-1639 all as specified by Engr-in-Charge.

S & F Corner self of decorative quality of 10-12mm thick toughened glass alongwith all fitting arrangemants as specified and directed by Engr-in-Charge.

M & L 75 mm thick PCC type D-2, 1:4:8 using 40 mm grade stone aggregate as in sub base all as specified and directed

M & L for machine pressed precast concrete interlocking paver block rubber moulded any colour, shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 with grey cement and no pigment over and including 30mm thick stone dust cushioning laid dry to profile all as directed and as per manufacturer instruction complete all as directed

M & L Cement concrete type C1, 1:3:6 using 20 mm grade stone aggregate as in sub base for edging / copings all as specified and directed

Excavating in trenches not exceeding 1.5 mtr wide and 1.5 mtr deep and getting out in soft/loose soil for foundations etc and getting out complete all as specified and directed.

Excavating in trenches not exceeding 1.5 mtr wide and 1.5 mtr deep and getting out in hard / dense soil etc complete all as specified and directed.

BLANK

M&L rolled mild steel plate (plain or chequred) with reveted,bolted or welded attechment (gusset/base plate) and steel of quality Fe-410-W (Gde-E-250 quality 'A' all as specified and directed.

S & F rolled mild steel sections confirming to Fe 410 - W 'A' quality as in main and columns, cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed.

S & F rolled mild steel angle/tubular/square/rectangular roof trusses (framed), trussed purlins, rails and fastenings and heavy bracket framing including distant pieces, cleats etc , confirming to Fe 410 - W (Gde-E-250) quality 'A' including distance pieces, cleats, etc., complete all as specified and directed..

M&L mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exceeding 5 cm (dia of bolt 5 to 12 mm)

M&L mild steel work as in wind ties,hold fast and brackets and similar articles for holding boarding etc complete all as specified and directed.

M&L 2 coat of synthetic enamel painting to steel and Steel based material surfaces exc 10cm width or girth over a coat of red oxide incl preparation of new steel surfaces complete all as specified and directed..

Supply and fix coloured (Grey) galvalume sheet with base metal thickness (BMT) of sheet 0.50mm, multirib TM profile, minimum 550 Mpa yield strength having maximum pitch of 250mm c/c and minimum 28mm crest depth as in roof covering/cladding to wall, fixed with self tapping screws including providing crimp at eves level shape of crimp complete all as specified and directed. Note :- The quoted rate shall include provision of end flashing and no extra payment with regard to this provision will be made to the contractor.

M&L 2 coat of cement paint over a coat of chalk whitning on new surfaces including preparations of wall complete all as specified and directed.

Excavation over areas not exceeding 1.5 M deep and getting out in Soft/ Loose Soil and getting out complete all as specified and directed..

M & L 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base flooring under floor complete all as specified and directed.

Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified

M & L for sand filling under floors or in foundations including watering and consolidation as in levelling coarse for fixing of interlocking tiles all as specified and directed by Engineer-in-Charge.

M & L for machine pressed precast concrete interlocking paver block rubber moulding any shape and size cnfirming to IS-15658-2006 of 60 mm thickness, M-35 complete all as specified and directed.

M & L powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators and partitions/cabin etc with one or more rebates including necessary joining cleats etc complete all as specified and directed.

M & L for 4mm thick ACP wall pannelling superior quality of any colour, fixed with rubber neaprene packing or as per manufacturer instructions , with aluminium powder coating snap bedding to aluminium frame work i.e in partition wall/cubicals all as specified and directed. Note : Colour will be approved by Engineer-in-Charge.

S & F 5.5 mm thick sheet glass ordinary quality and fixed to aluminium door/partition/windows etc in square exc 0.5 sqm in each pane including chamferring, moulded etc complete all as specified and as directed.

M & L for providing vanetian blinds of rolling type(Top & bottom) with hanging device like Galvanised brackets, aluminium powder coated channels, hangar, runner, weight strips and quality : fabric material etc complete all as specified and directed by Engineer-in-Charge. Note : Make and colour will be approved by GE.

S & F aluminium window and ventilators shutters, sliding type two or three tracks without sash bars, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, aluminium fittings like locking system etc complete all as specified and directed by Engineer-in-Charge.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

M & L for false ceiling work of aluminium snap grid system size 605x605mm for false ceiling with aluminium angles of size 23.5 mmx23.5,,x1.5mm fixed to wall with GI screws and aluminium tee of size 37.5x37.5x1.5mm in main and cross runners fixed 60 cm c/c and tied to existing roof/truss/rafters complete

M&L for hanging of aluminium false ceiling grid with 3 mm dia GI wire(upto necessary required length & 1.2 Mtr c/c) fixed to slopping roof (rafter/purlin/trusses) complete all as specified.

S & F 3mm thick poly carbonate trancelucent plain sheet decorative type of size 600x600mm for false roofing fixed or laid /inserted to aluminium grid frame work in ceiling with clips all as specified and directed by Engineer-in-Charge. Colour will be approved by GE .

S & F 2.50mm thick PVC tiles/sheets for flooring/skirtings , plain coloured, marbled mosaic or mottled finish, including cleaning of existing surface and POP work laid with approved rubber based adhesive with complete installations etc all as specified and directed. Colour will be approved by GE .

Taking down carefully aluminium/copper point wiring (light,fan,socket power etc) on TW batten/PVC casing capping, surface steel/PVC conduit including all fitting/fixtures and making good disturbed surfaces of wall/floor/ceiling etc to match the adjoining surfaces.

M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FR grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC board with earth dolly arrangement with surface plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for the following :-

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One bell point controlled by one push button.

(d) One 3 pin socket out let 5 Amps on Same board.

(e) One 3 pin socket out let 5 Amps on independent board.

All as per Sl item No 118 above but with two runs of 2.5 Sq.mm cable and one run of 1.5 Sq.mm cable as earth wire for one 3 pin socket outlet/power point 15 Amps controlled by one switch.

Supply & fix switch piano flush type single pole one way 5 Amp.

Supply & fix switch piano flush type single pole one way 15 Amp

S&F in repairs Fan regulator electronic solid state with various steps variable speed suitable for ceilling fan of size 900 to 1500mm sweep working on 230 V AC supply with all necessary connections

S&F Bell push 5 Amps SP one way suitable for 230 Volts flush type.

S&F electric bell Ding Dong AC 230 volts single pole.

Supply & fix Socket out let 2 in 1, 5 pin 5 Amps flush type.

Supply & fix Socket out let 2in1,3 pin 5 and 15 Amps flush type.

S&F ceiling rose,3 phase/ PVC /polycarbonate isolated body,65x50 mm two to three terminals

S&F lamp holder PVC/ Poly carbonate type with back plate suitable for batten fitting SP 230 Volts

S & F in repairs and connecting up LED light fittings 1x18/20 watt 4 feet long complete with LED rode 18/20 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton fitting DMLN1LT8-16, 1X18/20W and LED rode LT8-20-865-2 or equivalent).

S & F in repairs and connecting up LED light fittings 1x10 watt 2 feet long complete with LED rode 10 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton fitting DMLN1LT8-8 1X9/10W and LED rode LT8-8-865-2 or equivalent).

S&F in repairs power shield (mini MCB with enclosure) with DP, 32 Amp single phase 240 volts including making connection complete all as specified.Make: Standard: cat.no. DSMPCDPA032 or equivalent of L&T/HPL/.

S&F exhaust fan AC single phase 230Volt of size 300mm sweep with lauvers, complete all as specified & as directed by engineer-in-charge.

Disconnect & insulate electric supply wire and taking down carefully ceiling fan/exhaust fan any make any sweep dismantling and complete overhauling including oiling, greasing replacement of cotter pins, painting with one coat of synthetic enamel white paint after cleaning dust/dirt & writing MES No. and hanging/fixing the ceiling fan/exhaust fan to its original position of 3 core copper conductor cable PVC insulated & sheathed from ceiling rose to fan connector including replacement of clamps rubber shakle & top and bottom nut, bolt washers complete testing as directed.

S&F in repairs sheet metal inclosure 8 way MCB SPN distribution board 240/415 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43, IK 09 protection all as specified and directed by Engr-in-Charge.

S&F in repairs MCB SP 6-32 Amp single phase 240 volts including making connection complete all as specified.

S&F in repairs MCB SPN 6-32 Amp single phase 240 volts including making connection complete all as specified..

S&F energy saving LED bulbs 7 watt Cat No 7W E27 6500K A60 IND Make Phillips

Supply install and testing of water heater storage type electric capacity 25 litres BEE 5 star rated all as specified by engr in charge

M&L for earthing in repairs complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4 mm dia through GI pipe 15 mm dia light grade by means of bolts,nuts, check nuts and washers of galvanised iron or steel,with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing.PCC chamber,Chamber Cover all as shown in electrical plate no 3of SSr part I 2009 connected to earthing test point all as specified or indicated and testing on completion. The end point connection of eatrhing will be carried out with the help of GI bolt grouted and washer and nut.

S&F in repairs energy meter single phase with LCD display 10-30 Amp capacity Model EM 101 Cat No WM101BC 5DL0 after disconnecting old energy meter and depositing in MES store as directed.

Supply and fix in repairs LT XLPE insulated & PVC heavy duty armoured cable 1100 volts grade UG stranded aluminium conductor electric cable cross sectional area 6 Sqmm 2 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

Supply & fix Bulk head fittings environment friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs,complete all s specified & as directed by engineer-in-charge. Make: cat no.RUGBYNEONFT10WLED860SSYMTOPC or equivalent of crompton/wipro/Bajaj.

M&L for LT outdoor panel repair including repairs to panel hinge, welding replacement of hinges, replacement of electric connection cables inside the panel, reconnection of all in coming and out going cables with proper lugs and cable gland, scrapping and painting etc as directed by Enge in charge.

S&F in repairs street light fittings 45 watt LED energy saving, environmental friendly long life versatile pressure die cast housing with toughned glass 10 KV external SPD roadway luminaire with high power LED with secondary optics and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part No LSTS 45 CDL-1 or equivalent as approved by GE complete all as directed by Engg. in charge.

S&F in repairs post top lantern decorative HERITAGE LED light fittings 1x20 watt retro LED with opel deffuser including LED 20W including its pedestal duly fixed in the PCC, IP 65 protection fixed on existing/new GI pipe braket and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part No LPTH 20 CDL or equivalent in Philips, Havells, wipro as approved by GE complete all as directed by Engg. in charge.

S & F 18W all in One Solar Street Light IP65 Protection, 20 W (120 lm/watt) 6000k-6500k including inbuilt Solar Panel 40 W (Monocrystalline SPV modulel),20*1 LED Panel, CRI > 80% 5000 burning hr LED lamp life, Battery Lithium-Ion (LifePO4) 12.8 V 21 AH, Including necessary fixing bracket, nut, bolt & washer etc. complete. Cat Ref: SSSSLX0136 or Equivelent BHEL Note:- Ther serviceability of solar street light will be maintained for minimum two years under supervision of OEM.

SIDDHIVINAYAK ENTERPRISES