AR and MO Drains

Amount

Care and diversion of standing, water, spring water, river water ot drains and the like in working area including construction and removal of earth/coffer bundies upto DBL/existing level where required including pumping and bailing out the surface flowing water and keeping the working area free from standing water, flowing water seepage water and sub soil water for execution of entire work satisfactorily.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) and banking the same in layer not exceeding 20cm, in depth, breaking clods watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers disposed earth to be leveled and neatly dressed lead upto 50m and lift upto 1.50m. All kind of Soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

12 mm cement plaster of mix :1:6 (1 cement: 6 Fine sand) Neat cement punning.

Finishing walls with water proofing cement paint required shade : New work (Two or more coats applied @ 3.84 kg / 10 Sqm).nt plaster finished cement :1:4 (1 cement : 4 fine sand)

75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with: Moorum

75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with: Stone aggregate 20 mm nominal size

75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with: Stone aggregate 40 mm nominal size

75mm thick flat dry flooring with bricks of class designation 75 including filling of joints with Jamuna Sand.

Providing and laying precast cement concrete tiles (factory made) cement (M-25) 300x300x50mm size laid on 15mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and filling the same joints with cement plaster 1:3 (1 Cement : 3 Coarse Sand).

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On W.B.M. @ 0.75 Kg / sqm

Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate pacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the Surface, removal of debris etc. all complete. (Considering bitumen using 10.2% as per MORTH specification). 40 mm thick

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and fixing hard drawn steel wire mesh fabric 75x25 mm of weight not less than 7.75 kg/sqm fixed (welded) on frame of angle / T-iron 50x50x6 mm with flat iron of size 40x5 mm and 25x5 mm including cutting, welding, histing and fixing in position with the M.S. flat clams of size 50x6 of required length by welding with steel post embedded in RCC railing/wall and applying a priming coat of steel primer of approved brand and manufacture etc. complete as per drawing and direction of Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

ASHOK BUILDERS

M/s A Cube Buildcon

RAKESH SHARMA

VINOD KUMAR AND CO

Balaji Construction Company

arunkumar