8810REPAIR TO ROOF JOINERY SANITARY FITTINGS PLASTERING AND MISC WORKS IN IMH AREA OFFRs MD ACCN 54 CIV QTRs SURAKSHA ENCLAVE IN AF STATION EAST AREA UNDER GE M AF STATION JALAHALLI BANGALORE

Amount

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) and all as specified and directed.

All as per item 1 above but exceeding 1.5Sqm but not exceeding 4 Sqm each

Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each.

Supply and fixing 2nd class hardwood of Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, and all as specified and directed.

Supply and fixing 30mm thick Flush shutter,solid core construction,with block board core and plywood face panels with commercial type on both sides incl hinges as per site requirement complete all as specified and directed.

Supply and fixing 35mm thick hard wood framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl hinges as per site requirement and all as specified and directed

Supply and fixing 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats incl hinges as per site requirement and all as specified and directed.

Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification & drawing.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing..

Supply and fixing 300 mm Al alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts complete all as specified and directed.

All as pe item No 10 above but in repairs

Supply and fixing 150mm Al anodised, barrel tower bolts of extruded section complete all as specified and directed.

All as pe item No 12 above but in repairs

Supply and fixing Extruded Aluminium alloy handles, fabricated type, anodised 150mm

All as per item No 14 here in before but in repairs

Supply and fixing 100 mm long Stainless steel Butt hinges extruded.

Material and labour for preparation of new wooden surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink wood primer and all as specified and directed.

Supply and fixing stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or serviceable fillets complete as directed by EIC

Supply and fixing in repair stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or old serviceable fillets complete as directed by EIC

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and all as specified and directed.

Supply and fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing 3mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Material and labour preparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete.

Demolition of Concrete (un reinforced) of any description and in any position not otherwise specifically provided for

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor and all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

All as per item No 30 hereinbefore but in skirting including necessary cutting of tiles.

Material and labour for Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

All as per item No 32 hereinbefore but in skirting including necessary cutting of tiles.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

Material and labour for ceramic coloured tiles of size 300x450mmx7 to 8 mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured / white cement to match the tiles and all as specified and directed.

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 20mm graded stone aggregates as in plinth protection finished fair and even with out using extra cement all as specified and directed.

Demolition of brick work / PCC Block / stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete

Material and labour pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 .

Taking down cement plaster of any description incl raking out joints, haking for key scrubbing down with water etc complete

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on external surfaces finished even and smooth without using extra cement and all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls.

Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement and all as specified and directed.

Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaes over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.

Material and labour for distempering walls with two coats of washable distemper oil emulsion on old surfaes over a coat of 2mm wall care putty incl necc preparation and removal of old distress as directed all as specified

Material and labour for two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including necessary preparation and all as specified and directed.

Material and labour for treating with three coats of whitewash on new surfaes of walls incl necc preparation to give uniform and smooth finish all as specified.

Material and labour for treating walls with three coats of whitewash on new surfaes of ceiling incl necc preparation to give uniform and smooth finish all as specified.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash and all as specified and directed.

All asper Item No 48 but in ceiling

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of oil emulsion distemper and all as specified and directed.

All as per Item no. 50 but in ceiling.

Supply and fixing in repairs brass mortise lock (6 levers), vertical type, size 100mm long complete all as specified and directed .

Supply and fixing in repair door closer Al die cast body hydraulically regulated, designation No. 1 universal type, suitable for door shutter complete all as specified and directed .

Material and labour Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work and tmt bars all as specifed.

Taking out steel/plastic/cpvc water tubing and connections including cleaning for refixing 15 mm dia.

All as per item No 55 hereinbefore but 20mm dia.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTACPVC complete all as specified.

Supplying fixing of 25mm outer dia CPVC union complete all as specified.

Supplying and fixing of 20mm outer dia CPVC brass elbow and all as specified.

Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of following sizes

Supply and fixing in repair angular stop valve(one way / two way) 15 mm chromium plated concealed, fancy type screwed down high pressure screwed both ends for iron pipe for 15 mm bore.

Supply and fixing in repairs Bib taps fancy type (short / long body) chromium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore

Supply and fixing in repairs pillar tap with capstan heads chromium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore

S& F in repairs for CP brass health faucet alongwith flexible pipe and stay complete of approved make all as specified and directed.

Supply and fixing in repairs coloured PVC toilet cabinet of size 355x455x90mm with looking mirror in replacement of existing looking mirror/wooden cabninet and repairing the disturbed surfaces to match with existing of approved make.

Supply and fixing in repairs viterous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified

Supply and fixing in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe antisyphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified

Supply and fixing in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed

Supply and fixing in repairs wall mixture incl three joints to steel pipes of 15 mm bore and plugging & screwing to walls and making good the disturbed surfaces of walls to match with existing surfaces all as directed Make: Jaquar

S & F in repairs PVC flexiable pipe (Connecter) 15 mm dia, 450/650 mm long with check nut and bolt with washer all as specified

Supply and fixing in repairs PVC waste pipe 32/40mm bore for WHB & Sink

Supply and fixing of in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing of glass corner shelf as soap dish of size 10 x 10 inch all as spfd and directed.

Dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipes.

All as per item No 79 above but bore of pipe 110 mm

Supply and fixingPVC (SWR) bends of any radius with access door bore of pipe 75 mm

All as per item No. 81 above but bore of pipe 110 mm with access door

Supply and fixingPVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm

All as per item No . 83 above but bore of pipe 110 mm

Supply and fixing125/ 110 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement

Dismantling boarding, any description, fixed in any position with nails

Supply and fixing 16 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work fixed withscrews to timber frame work and all as specified and directed.

Supply and fixing 16 mm thick plywood, grade 1 (with BWR resin) with decorative face 4mm veneers on single face; fixed with screws to timber frame work

Supply and fixing in repairs auto hinges 0 crank with 110 degree rotation for cupboards

Supply and fixing 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised.

Supply and fixing 40mm dia, brass cupboard knobs fixed with nut, screw and washer

Supply and fixing 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed

Supply and fixing brass Drawer handles, projection drop (50mm to 65mm) on screwed plate long and all as specified and directed.

Supply and fixing in repairs floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and all as specified and directed.

Supply and fixing in repairs MS chromium plated 25mm dia heavy duty curtain rods and all as specified and directed.

Supply and fixing in repairs stainless steel fancy type curtain brackets and all as specified and directed.

Supply and fixing in repairs Bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed.

Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges

Supply and fixing in repair grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).

Supply and fixing 125mm bore brass CP grating of approved design fixed with white cement complete as directed including taking down old one.

Supply and fixing in repair shower rose chromium plated 120 mm with or without swirel joints including fixing to steel pipe of 15 mm bore

Supply and fixing in repair spindle of any size for tap,angle/stop valve all as specified and as directed.

Supply and fixing in repairs Stainless steel Plate rack 950mm x 560 mm x 200mm deep with plate racks, spoon holders, shelves etc complete

Supply and fixing in repairs frame work and shutters of the cabinets including drawer fascia/sides /bottom, shelves etc. shall be made out of 19 mm thick marine plywood (of make like Green ply/Century Ply/ Kit ply or equivalent of grade of boiling water proof and moisture resistant) with laminate of inside of 0.6 mm and 1.0 mm laminate of glossy finish

Supply and fixing in repairs auto closing hinges 15-24mm of 0 Crank (KH-001) with an opening angle of 110 degree for kitchen cabinet Make : Sleek/ Hettich / Blum.

Supply and fixing in repairs ball bearing runners Channel length 400-500 mm soft closed telescopic channel full extension load capacity 35 kgs Make : Sleek/ Hettich / Blum.

Supply and fixing in repairs stainless steel handles 150 mm size for kitchen cabinet shutteres Make : Sleek/ Hettich / Blum.

Supply and fixing stainless steel anodised G Profile handles 14 inches size for kitchen cabinet shutteres of 19mm

Supply and fixing Chromium plated stainless steel wire basket (Storage Basket) pull out type for large utensils size 480 x 500 x 150 mm of grade 304 incl neccessary fittings Make: NOVA Sleek/DWD GRASS including all accessories

Supply and fixing Chromium plated stainless steel wire basket (Cup and Saucer basket ) pull out type for large utensils size 356 x 508 x 100 mm of grade 304 incl neccessary fittings Make: NOVA Sleek/DWD GRASS including all accessories

Supply and fixing Chromium plated stainless steel wire basket (Plate/Thali Basket) pull out type for large utensils size 356 x 508 x 200 mm of grade 304 incl neccessary fittings Make: NOVA Sleek/DWD GRASS including all accessories

Supply and fixing Chromium plated stainless steel wire basket (Perforated Cutlery Basket) pull out type for large utensils size 356 x 508 x 100 mm of grade 304 incl neccessary fittings Make: NOVA Sleek/DWD GRASS including all accessories

Dismantling of existing unserviceable water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr) complete all as specified

Dismantling of existing unserviceable water tank and removing, (Capacity 250 Ltr and n. exc. 500 Ltr) complete all as specified

Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 1000 Ltr capacity incl tank nipple complete all as specified and directed

Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacity incl tank nipple complete all as specified and directed

Material and labour for broken stone boulders hard core of guage n.exc 63mm deposited spread and level laid in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base of floor finished even and rough to receive top layer and all as specified and directed.

Material and labour for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade over sand cusion and all as specified and directed by Engr-in-Charge.

Material and labour for Sand filling under floors or in foundations including watering and consolidation and all as specified and directed.

Material and labour for 25 mm thick PCC (1:2:4 ) type B1 using 20 mm graded stone agg as in sub base of floor levelling the existing floor and complete all as specified and directed.

Material and labour for Screed bed or bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes and all as specified and directed.

Material and labour Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spfd and directed.

Material and labour for Rendering 10mm thick in CM 1:3 on stone masonry surfaces to finish even and rough to receive wall tiles/stones and all as specified.

Material and labour machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed grey cement slurry mixed with pigment to match the shade of the slab and including rubbing, polishing complete all as spfd and directed.

Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape &size according to uPVC profile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks,EPDM gasket, woolpile, zinc alloy (white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealen to verbacker rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e.in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wiremesh (Two nos. glazed with 4mm thick filmed glass & one no.wiremesh panels) made of (big series) frame 116x45 mm & sash 46x62 mm both having wall thickness of 2.3±0.2mm and single glazing bead/ double glazing bead of appropriate dimension.The rate include the grill and removal of old windows if any and make good all as directed by GE.

Supply and fixing for 8 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes).

BYRAVESHWARA CONSTUCTION

Aditya Associates

SRI GANESH ENTERPRISES

chowdeshwariconstructionco

M B Patel and Sons