Signalling works in connection with CTR/TTR works under PH-31 in EAST section of Mumbai Division.

Item Breakup - A-SOR ITEM

Supply of PVC flexible copper cable single Kilometre core multistrand 1 x 2.5 Sq.mm (50 conductor each diameter 0.25 +/- 0.01) as per IS 694/2010 with latest amendment if any.with insulation thickness of 0.70mm nominal conductor resistance 7.98 ohms/Km and test parameters are as per IRS (S)76/89 (Amd.3). (Colour of insulation is to be confirmed from consignee before supply )(Inspection Agency- Consignee)

Supply and Fixing of RE Protective Screens of Numbers expanded metal 12 SWG of size 1200 x 1500 mm on signals as per extant practice & as per instruction of Rly engineer at site. DRG.No.SK- 844.(Inspection Agency-Consignee)

Supply of ARA Terminal blocks with links Numbers 1000.00 made of PBT Specn No.IRS/75/2006(Rev-2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4, SA-23745 Alt.5, SA- 23746, SA-23748 Alt.4 & SA-23756A Alt.3. (Inspection Agency-RDSO)

Supply of Track Lead Juction Boxes as per Numbers C.Rly Drg. No.RST 11509 made from fiiber glass alongwith terminal blocks.(Inspection Agency-Consignee)

Supply of PVC jacketed wire rope for Track Metre Lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS: 2266:2019. Reclaimed or recycled material should not be used.(Inspection Agency-Consignee)

Supply of DWC HDPE pipe with one snap fit Metre coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver. 1.1 with Amd.1 or latest.(Inspection Agency- RDSO)

Supply of RCC pipes 150mm dia alongwith Metre collars as per IS No. 458/2003 amendment-1 with Rev.4.(Inspection Agency-Consignee)

Supply of RCC pipes half round of size 150mm Numbers dia outer and 100 mm dia internal 1 mtr long matching to IS No. 458/2003 amendment-1 with Rev.4.(Inspection Agency-Consignee)

Supply of RCC pipes half round of size 300mm Numbers dia outer and 250 mm dia internal 1 mtr long matching to IS No. 458/2003 amendment-1 with Rev.4.(Inspection Agency-Consignee) Total 1078289.50

Item Breakup - B-SOR ITEM

Fabrication laminated/Fibre glass sheet in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1&2. with latest alterations & as per instructions of Rly engineer at site.Single Case(Inspection Agency-Consignee)

Fabrication laminated/Fibre glass sheet in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1&2. with latest alterations & as per instructions of Rly engineer at site.Half Case (Inspection Agency- Consignee)

Fixing of ARA Terminals and fuse blocks on Per phenolic laminated sheets and fixing by Conductor stainless steel/brass nuts & bolts.This includes provision of two additional holes on the board on either side for cable conductor entry. (Inspection Agency-Consignee)

Termination terminal/fuse blocks in the apparatus Cases/ Conductor cable termination rack.This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site.(Inspection Agency-Consignee)

Excavation and Casting of Apparatus Case Numbers foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost.Single Case as per Drg No . SK-803(Inspection Agency- Consignee)

Excavation and Casting of Apparatus Case Numbers foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. Half Case as per Drg No . SK-804(Inspection Agency- Consignee)

Erection of Apparatus Cases. This includes Numbers filling of location foundations and plastering. Single Case(Inspection Agency-Consignee)

Erection of Apparatus Cases. This includes Numbers filling of location foundations and plastering. Half Case(Inspection Agency-Consignee)

Foundation and erection of AFTC junction box Numbers as per instructions of site Engineer. (Inspection Agency-Consignee) MUMBAI-CST-DIVISION-S AND T/CENTRAL RLY

Excavation of cable trench as per cable route cum plan,1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness after clearing of route,bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8m or more. It if is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions proportionate payment will be made as per procedure. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. Drg. No. SK 805(Inspection Agency- Consignee)

Excavation of cable trench as per cable route cum plan,1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness after clearing of route,bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions proportionate payment will be maden as per procedure. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. Drg. No. SK 805(Inspection Agency- Consignee)

Cutting of all types of Roads/ platforms cum (ecxcept concrete type) for trenching and excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI /DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & instructions of Rly engineer at site. Drg. No. SK 807(Inspection Agency-Consignee)

Fixing of GI pipes for crossing the culverts, Metre bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.(Inspection Agency- Consignee)

Digging of trench 1.0 M deep from rail cum flange/road level (for LC) and 0.3Mtrs. to 0.6 Mtrs wide and back filling after placing of DWC/RCC/GI pipe.(Placing of DWC/RCC/GI pipe coverd separately. The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. Drg. No. SK 806(Inspection Agency-Consignee)

Laying collars/RCC Half round pipes in trenches at places of track and road crossings, platform cuttings etc. (Inspection Agency-Consignee)

Laying of signalling/Power/Telecom cable of Kilometre various cores/sizes in trenches.(Inspection Agency-Consignee) MUMBAI-CST-DIVISION-S AND T/CENTRAL RLY

Laying bridges/culverts/concrete drawin/mountain ridges etc. with suitable GI bend shall be provided where there is turning of pipe as per the instruction of Site engineer. GI clamps at every 2m as shown in the drawing to be fixed. Suitable holes to be made in the pipe before laying as per the instruction of the site e n g i n e e r 10mm dia Drg. No. SK 808. (Inspection Agency-Consignee)

Laying of GI pipes inside the excavated trench Metre in rocky area /less depth area as per instructioin of Site engineer. GI clamps at every 2m as shown in the drawing to be fixed. Suitable GI Bend/Coupling and holes to be made in the pipe before laying as per the instruction of the site engineer (Inspection Agency-Consignee)

Releasing of cables from old location boxes Numbers and taking it into new location boxes. This includes excavating the earth to release the cables from old location box for taking it into new location. This also includes releasing the old location box and bringing it to nearest station / central cabin. Location (old) will be released only after ensuring all working cables have been shifted in New location. (Inspection Agency-Consignee) (Note=Quantity unit Number Should be read as Per location )

Making an entrance for new cable in old Numbers existing location, Casting concreting and curing of foundation and restoring it to old position by perfect masonry/concreting work. Contractor will ensure that cable entered in Location Box is properly protected.(Inspection Agency-Consignee) Total 849580.70

Item Breakup - C-NON SOR ITEM

Set of nylon cable ties, One set consist 02 Set items 94000 nos. 1) Nylon cable tie size 100x2.5 mm Qty 88000 Nos. 2) Nylon cable tie size 150x3.6 mm Qty 6000 Nos. (Note Each type of nylon cable ties to be supplied in packets of 100n nos. only)(Inspection Agency- Consignee)

Supply of portable drilling machine ( cycle Numbers Machine) for rail web suitable for holding 7-8 mm drill bit.One item should be get approved from consignee before bulk supply. (Inspection Agency-Consignee)

Fluke Hand Held 100 KHz Digital True RMS Numbers Multimeter Fluke 287 or Fluke 289(Inspection Agency-Consignee)

Digital multimeter with all the accessories as Numbers per Specification-A make Fluke-101, (Inspection Agency-Consignee)

Supply of Megger 100V, 50 ohms hand driven Numbers type in Metal body with handle of Nippen, Motwani, Fluke or Rishabh make.(Inspection Agency-Consignee) MUMBAI-CST-DIVISION-S AND T/CENTRAL RLY

Battery operated High performance LED area Numbers with 3000 lumens output light weight & unbreakable as per specification attached (1) Product specification M18 HAL -+ M18 NRG 502B (2) Article No. 493345123 (3) Battery compatibility all Milwaukee M18 Batteries (4) Battery capacity (Ah) 5.0 (5) Battery type Li ion (6) No of Battery charger supplied 01 No. (7) Full Battey charging time 59 min (8) Max light output 3000/1500/650 (9) Max run time battery 2/4/9 hr. (10) No. of batteries supplied 2 Nos. (11) Voltage (AC) (V) 220-240 (12) Voltage (DC) (V) 18 (13 Wight with battery pack (kg) 3 (14) One year onsite warranty, installation & training free of cost mak Eibenstock/Milwaukee or equivalent. (Inspection Agency-Consignee)

Supply programmable static switching module of Naturally air-cooled only with an at a glance LCD display suitable for break-less switching between two DC supplies of upto 40 A for 20- 110 VDC . (Inspection Agency-Consignee)

110 V DC motors with gear box IP 67 type Numbers (complete motor should be water proofed ) 400 V AC immunity for Siemens make Point machine drg.no. C-RT-PM4-A132-01- 06(Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers 1000.00 gauge plate fixing as per annexure A (Material SS -304 Grade)10mm x 50 mm SS full threaded(Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers 1000.00 gauge plate fixing as per annexure A (Material SS -304 Grade) 12mm x 125mm SS full threaded(Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers 1000.00 gauge plate fixing as per annexure A (Material SS -304 Grade) 12mm x 40mm SS half threaded(Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers gauge plate fixing as per annexure A (Material SS -304 Grade) 18mm x 90mm SS half threaded(Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers gauge plate fixing as per annexure A (Material SS -304 Grade) 18mm x 65mm SS half threaded (Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers gauge plate fixing as per annexure A (Material SS -304 Grade) 16mm x 65mm SS half threaded(Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers gauge plate fixing as per annexure A (Material SS -304 Grade) 20mm x 65mm SS half threaded(Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers gauge plate fixing as per annexure A (Material SS -304 Grade) 12mm x 65mm SS half threaded(Inspection Agency-Consignee)

Supply of SS nut bolts set for point machine, Numbers gauge plate fixing as per annexure A (Material SS -304 Grade) 18mm x 80mm SS half threaded(Inspection Agency-Consignee)

WELD LESS MODULAR TYPE SS MEDUIM SIZE Numbers LOCATION BOX(Inspection Agency-Consignee)

WELD LESS MODULAR TYPE SS POST BOX Numbers LOCATION BOX(Inspection Agency-Consignee) MUMBAI-CST-DIVISION-S AND T/CENTRAL RLY

Supply of 62mm outside diameter inner dia Metre 50 mm DWC pipe of wall thickness minimum 2mm as per IS 14151 of 1994 with latest amendment if any, suitable for taking track lead wire of AFTC (Orange colour) flange type(Inspection Agency-Consignee)

Supply of DWC/ HDPE pipe with onesnap fit Metre coupler O ring confirming to IS 14930 (Part 2: 2001) non metalic, normal duty, pliable with protection against chemical attack and fire resistant anti rodent, in 6 meter length of size 50 mm inner dia.

Repairing masonarywork. This also includescleaning the locations, sandfilling in the location andplastering inside the location(Inspection Agency-Consignee)

Execution of S & T work related to Job enginnering/Signalling block ofCTR/TTR/TSR or others, inone block, five unskilledmanpower have to beprovided during block for S&Tconnection removing &refixing as per Railway siteengineer instruction.(Inspection Agency-Consignee)

Casting of cement concrete to protect S&T cum equipments and laid cables, above pipes etc by concrete mixture of cement, sand, stone in theratio of 1:2:4 using 25 mmgraded stone aggregate asper instruction of site incharge of railways. Concreteis to be casted with the helpof suitable size shutteringform as per site requirement.Concrete is to be cured for sufficient time as per standard practices on railways(Inspection Agency-Consignee)

Heavy duty portable single phase inverter Numbers welding machine as per Technical specification attached(Inspection Agency- Consignee)

Track side Electronic Unit (EAK) for MSDAC as Numbers perRDSO Spec No.:RDSO/SPN/176/2013 Ver.- 3Make:ELDYNE only.(Inspection Agency- RDSO)

Supply of counting head ZP 43 V complete Numbers with sensor for Siemens make MSDAC(Inspection Agency-Consignee)

Supply of counting head ZP D 43 complete Numbers with sensor for Siemens make MSDAC(Inspection Agency-Consignee)

Design, supply and manufacturing of static Numbers switch as per drawing no MRVC/S&T/16(Inspection Agency-Consignee) Total 12487626.39

Item Breakup - D-SOR

Supply of Digital Axle Counter Multi section Per type complete sysem including the Central Detection Evaluator and final track clearance relay for Point (DP) each secton, Reset boxes, LV boxes, All track side units with detection point complete assembly & fixing arrangement for each detection point, clamps deflector for either side of each detection points, monitoring console for monitoring all the DPs at a time installed at a station/ RH/IBH etc. with all other accessories fully wired and fully equipped as per RDSO specification No.RDSO/ SPN/176/2013 (ver.3) or latest and manufacturers specification. The equipment must also include the following : a) System must have remote monitoring and health diagnostics feature as per RDSO specification. b) Surge protection device. c) 20% spare slots for the both detection heads and track section in the evaluator for future and emergenc provision. Each set also consisting of a) Double rail contact of standard length of cable as per site requirement and mounting accessories - Equal to no. of DP. b) Deflectors to safeguard Rail Contact will be TWICE the no. of DPs. c) Protecting tube from DP to railhead as per requirement. d) Diagnostic PC as per specification and other accessories (as per Annexure-) e) Pre-wired cabinet/rack no. as per site requirement. f) 6 Nos. Electrostatic Discharge Wrist Band for cards/ modules protection.(Inspection Agency-RDSO) Total 5996136.00