Providing laying of sewer lines of various dia with construction of manholes, providing of rising main and construction of sump well including installation of STP at Chattabal

PART A (CIVIL NETWORK): Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres (All kinds of soil).

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed (All kinds of Soil).

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material (All kinds of soil).

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.

Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge (Bituminous road).

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge (1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).

Depth exceeding 1.5 m but not exceeding 3m.

Depth exceeding 3 m but not exceeding 4.5m.

Extra for planking, strutting and packing materials for cavities (in close timbering), if required to be left permanently in position. (Face area of timber permanently left to be measured).

Supply & laying of stone soling in horizontal on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, All work up to plinth level.

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

1:2:4 (1 cement : 2 Coarse sand : 4 graded stone agg. 20mm nominal size) (crushed)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level.

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in well-steining including curing but excluding the cost of centering, shuttering, finishing and reinforcement, with (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing & Laying to level & slope, with proper grade pipes of Class NP3/NP4 of following internal dia & grouting the pipe joints with cement slurry 1: 2 mix (1 cement: 2 fine sand) and also sealing the pipe joints with fixing of Rubber Gaskets incl. Cost of cement, sand, Rubber gaskets and RCC pipes incl. Testing of joints & all carriages of pipes upto site of work (Complete job).

300mm dia (NP3)

450mm dia (NP4)

600mm dia (NP4)

Reinforcement for RCC work incl. Straightening cutting, bending, placing in position and binding all complete (Thermo Mechanically Treated Bars).

Well sinking to level including supply/engagement of all types of well sinkers including Headman; Assistant Well sinker, Labour (Skilled / unskilled) supply of sand,E.C. Bags, filling of sand into E.C. Bags, including stitching loading/unloading of sand filled Bags after every casting on plate form, providing of plate form of required strength including its fixing/Removal after every casting disposal of loading material and including cost of scaffolding charges, carriage of all materials what so ever involves. The job includes providing and fixing of 0.63mm×300mm G.I. Sheet after every casting/joints to prevent leakage including adjustment to steel edge in level on ground after preparation of ground by w ay of levelling etc (Complete Job).

Centering and shuttering incl. Strutting, propping etc and removal of form work for:-

Foundation, footings, basis of columns etc, mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Walls (any thickness) incl. Attached pilasters buttresses, plinth and string courses.

Edges of slab and breaks in floors in walls (above 20Cm wide).

Edges of slab and breaks in floors in walls (Under 20 cm wide).

Well steining

Extra for shuttering in circular work (20% of respective centering and Shuttering items)

Stairs (excluding landings) except spiral staircases.

Providing & Fixing of Polycrate Manholes covers & frame including all safe carriages upto site of work (Complete Job).

Providing, Laying and Spreading of granular Sub Base in trenches in uniform layers including dressing, watering, ramming etc and carriage by tippers to site of work with all leads and lifts (Complete Job).

Providing & laying House connections with the following PVC accessories of ISI make (Prince-B Type) incl. all carriages (Complete Job).

PVC Pipe 100mm dia

PVC Pipe 150mm dia

PVC Door Bend 100mm

PVC Plain Bend

PVC Plaine Collar 150mm dia

Restoration / realigning of G.I. / C. I / D.I Pipe Connections including providing of all accessories required at site including dewatering, cutting, fitting, fixing, with all carriages (Complete Job).

15/20mm dia

25mm dia

50mm dia

75mm dia to 100mm dia

Above 100mm dia upto 300mm dia

Above 300mm dia

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required (In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works).

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second class teak wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick (Second Class teak wood).

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete (With 2nd class teak wood beading 62x19 mm).

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Welded).

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (0.63 mm thick with zinc coating not less than 275 gram/m2).

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete (50 mm thick with 20mm nominal size stone aggregate).

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications (Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 600x600 mm).

Providing and Fixing of Sanitary fitting of approved quality (Incl. All carriages) Complete Job.

W.C Indian Type with Cistern bend (ISI Marked) Complete Job

Geyser 50 litres capacity (ISI Marked) Recold / Venus

Wash basin with pedestal (ISI Marked)

Wall Mixer

Bib Cock

Basin Mixer

PVC connection

Waste Piipe

4" PVC Pipe (ISI Marked)

3" PVC Pipe (ISI Marked)

20mm dia PPR Pipe including Fittings

20mm dia PPR Union

1000 Litres PVC Water Tank (ISI Marked)

20mm dia Tank Nipple

25mm dia PPR Pipe including fittings

25mm dia Tank Nipple

Ball Valve Brass (ISI Marked)

Providing and fixing of accessories including dash fasteners, screws, handles, door stoppers, hangers etc on all doors and windows including all carriages wherever required as per the directions of Engineer-In-Charge (Complete Job).

One lighting point shall include wiring for lighting points in 1.5 sq mm PVC insulated copper wire and 2.5 sq mm PVC multi-stranded copper wire for lighting sub-mains, 6 Amp one-way switch, 2 mm thick PVC conduit/channel with bends, junction boxes, etc, 6 Amp S-pole MCB, 10 DP MCB, 2 way DB for housing MCB and Hylen sheet with wooden box recessed in walls with accessories.

One heating point shall include wiring for heating points in 2.5 sq mm PVC insulated multi- stranded copper wire and 4.0 sq mm PVC Insulated multi-stranded copper wire for heating sub-mains, 16 Amp switch socket combined, 2 mm thick PVC conduit/channel with bends, junction boxes, 10 Amp S-pole MCB, 2-way DB for housing MCB and Hyle sheet with wooden box recessed in walls with accessories.

One lighting point shall include wiring for lighting points in 2.5 sq mm PVC insulated multi-stranded copper wire, 12 mm cieling fan, 225 mm exhaust fan with cieling roses and PVC square block, 350 Volts electronic fan dimmer, 2 mm thick PVC conduit/channel with bends, junction boxes, 6 Amp S-pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB for lighting circuits and Hylem sheet with wooden box recessed in walls with accessories.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete (On steel work).

Provision for Site development inside the IPS premises including arth filling, plantation etc (Complete Job).

Providing and fixing of C.I Sluice valve 400mm dia any approved brand ISI Specifications with nuts, bolts, rubber insersion, packings inlcuding fixing of tie rods, handle, including jointings with flanges etc as per ISI Codes including providing of handles as per site requirement with all safe carriages from source to site of work (Complete Job).

Carriage of Materials by Mechanical Transport from Source to site of work: -

Stone soling from Athwajan Avg. 12kms

Stone Agg. 40mm and above from Athwajan Avg. 12kms.

Stone Agg. Below 40mm from Athwajan Avg. 12kms.

Sand from Ganderbal Avg. 16kms

Cement and Steel Avg. 6Kms

Bricks from Pampore Avg. 16Kms

Providing and fixing of MS Gate of required size at appropriate spot including welding, charges of welding machine, electrodes, welders, helpers, electricity charges and including all carriages involved, etc. (Not less than 3 quintals)

Providing and laying of S&S centrifugally cast (spun)/ Ductile iron pipe conforming to IS:832 300mm dia ductile pipe class k9- pipes

Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc (Heavy class) (upto 300mm dia)

PART B : (Construction of STP of 2.5MLD Capacity based on S.B.R. Technology along with free trial of 6 months) on EPC mode as per following:- 1 Electro Mechanical Equipments to be installed as per Annexure A). 2 Civil Structures to be erected as per Annexure B). 3 Lab Equipments to be supplied as per Annexure C). 4 Technical Specifications Of Electro-Mechanical works as per Annexure D).

PART C: Operation & Maintenance of 2.5 MLD STP for 05 years post expery of free trial run of 6 months as per Annexure E)

Please Enable Macros to View BoQ information