ADDN /ALTN TO BLDG NO. P-17(M BLOCK) AT VV CAMP UNDER GE

Demolition of unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

Demolition of PCC Block walling built in CM 1:6 complete all as specified and as directed

M&Lreinforced cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in floors slab, roof, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed. ( Note: removing exsisting APP membrane incl roof plaster and thoroughly cleaning by pressure water washing of old roof surface shall be inclusive of quoted rate)

M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed.

Providing and fixing in position, 100 mm thick factory made expanded polystyrene core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia zinc coated GI wire mesh with 50 mm pitch in both the directions and on both faces of the wall and connnected by GI wire of 3mm dia at alternate row by welding. The EPS core shall consist of 50 mm thick EPS of density not less than 16 kg/per cum. Both the outer faces of the panel shall be finished by applying the layer of 25 mm thick cement mortar 1:3 {1 cement 3 course sand (not having more than 40% stone chips of size upto 6mm)} with the help of shotcreting/ guniting equipment etc at a pressure not less than 1 bar (100KN/sqm) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge. Note: The work aginst this item shall be got executed through OEM or his authorised executing agency after approval of GE. The Contractor shall submit test reports and manufacturers certificate for materials, concrete mix design details etc and the cost the same shall be borne by the contractor. Make: ALPHA PEB/RAPIDCON/JSW/SRISTI VENTURES

M&L for Reinforced cement concrete M30 (design mix) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified.

M&L for form work to sides and soffits of rough finished floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc alos splays between floors, and beams,etc compelte all as specified and as directed by Engineer in Charge.

M&L for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips

-All as per Sl Item No.9 above but 6 mm to 8mm dia.

M&L for TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire.

M & L for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement etc complete.

M & L for rendering 5 mm thick in CM 1:4 with WPC over backing coat of 10 mm thick in C M 1:6, finished even and smooth without using extra cement etc complete. Note: WPC will be measured and paid as supply only.

Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Structural steel works as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality A, Complete all as specified and directed.

M & L for structural steel works in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240, Complete all as specified and directed.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B,etc complete all as spd and directed.

M&L for Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface of concrete walls, concrete blocks, slabs, brickwork or stone masonry, With or with out reinforce ment etc. and making good by filling with necessary cement mortar complete all as specified.

M&L for preparation of new steel surfaces and applying two coats synthetic enamel (ordinary tint) over a coat of red oxide primer to surfaces of any description, when unconnected with other painting or when painted in a different tint etc completed all as spd and directed.

M& L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L PVC half rounded gutter pipes of dia 140mm, complete all as specified and as directed by Engineer-in-Charge.

M&L PVC rounded downtake pipes of dia 110mm, complete all as specified and as directed by Engineer-in-Charge.

M&L PVC rainwater stop end outlet (connecting pipe b/w gutter pipe and downtake pipe) of size 140mm, complete all as specified and as directed by Engineer-in-Charge.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polish over and including screed bed or bedding layer of 20 mm thick in CM 1:6 for laying floor finishes, staircases, etc completed all as specified.

M & L for Granite (of any type) tiles 20mm thick machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, etc completed all as specified.

M&L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling/truss section using GI wire with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish incl frame work for ceiling and OBD painting in celing with 2 coats of distemper over a coat of primer incl preparation of false ceiling surfaces as all directed and specified by Engr-In-Charge.

S&F of light/dark shade Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and as directed by Engineer-in-Charge.

S&F of light/dark shade Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a rendering of 10mm thick CM 1:4, all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of primin incl 3mm thick wall care putty on plastered and other surfaces with alkali resistant priming paint complete all as specified.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge Make : Veka India Pvt Ltd. Saint-Gobain India Pvt Ltd. Schueco India Pvt Ltd. Deceuninck India Pvt Ltd. Aluplast India Pvt Ltd. AIS Windows. Conclusion.

Supply and fixing 24 mm thick factory made PVC door shutters to existing door frames made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanisedM.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer- in-charge. (For W.C. and bathroom door shutter). ® Make : Veka India Pvt Ltd. Saint-Gobain India Pvt Ltd. Schueco India Pvt Ltd. Deceuninck India Pvt Ltd. Aluplast India Pvt Ltd. AIS Windows. Conclusion.

S & F of 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed.

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply and fixing 100 mm long butt hinges, medium weight cold rold mild steel and fixed.

Supply and fixing 200 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified

S & F Bib taps, CP brass, fancy type, long body with flange, screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs, all as specified and as directed. Make : Jaquar (CAT Part No COP-107PM ), and equivalent of Hindware. Cera, Parryware

S & F 25 mm dia aluminium anodised powder coated type tubular curtains rod including fixing brackets, stops, rollers etc complete all as specified and directed.

S&F fancy type CP brass angle cock of brass chromium plated with ling shank screwed for pipe and fixed 15mm bore fixed to iron pipen all as specified Make : Jaquar (CAT Part No COP-057PM) and equilent of , Hindware. Cera, Parryware

S & F Health faucet, CP, with 1.5 metre flexible tube with wall hook, (ABS body) 8 mm dia spirochrome flex tube & wll hook, all as specified and as directed. Make : Jaquar (CAT Part No ALD-587) or equivalent of , Hindware. Cera, Parryware

S & F overhead shower 120 mm round shape single flow (Face plate stainless stell & ABS Body in chrome finish) with rubit cleaning system with brass arm and flange 225mm pipe all as specified and as directed. Make : Jaquar (CAT Part No OHS-1663 ) or eauilent of , Hindware. Cera, Parryware

S & F CP brass Central hole Basin mixer with out popup waste system with 450 mm long braided hoses 15mm bore all as specified and as directed. Make : Jaquar (CAT Part No COP-167BPM ) or equilent of , Hindware. Cera, Parryware

S & F 15 mm bore CP brass wall mixer provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges all as specified and as directed. Make : Jaquar (CAT Part No COP-273PM ) or equivalent of , Hindware. Cera, Parryware

S & F CP brass Aerator Pillar taps brass chromium plated, fancy type, foam flow, screwed down high pressure screwed for iron pipe 15mm bore, fixed all as specified and as directed. Make : Jaquar (CAT Part No COP-011PM) or equivalent of Hindware. Cera, Parryware

S & F S/S Toilet paper holder with flat recessed type complete all as specified. Make : Jaquar , Hindware. Cera, Parryware

S & F brass chromium plated tubular towel rail 20mm dia D type 60cm ling between flanges complete all as specified and directed. Make : Jaquar , Hindware. Cera, Parryware

S&F CP towel Ring Square with Round Flange, Cat Part No-ACN-1121N, complete all as specified and directed . MAKE:- JAQUAR

S&F CP Soap DishHolder, Cat Part No-AKP-35731P, complete all as specified and directed MAKE:- JAQUAR

S & F Mirror cabinet 622x422mm all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brakcet guard and railing 60cm long complete all as specified and directed. Make : Jaquar , Hindware. Cera, Parryware

S&F Corner Glass shelf (with bracket), Cat Part No-ACN-1173, complete all as specified and directed MAKE:- JAQUAR

S & F vitreous china wall hung WHB with fixing accessories of size 560x415x200mm Jaquar CAT Part No CNS-WHT-801) with CP brass waste coupling, Jaquar (CAT PART No ALD-705) , waste pipe and full Pedestal (jaquar (CAT Part No -WHT-301 ) all as specified and as directed. Make : Jaquar , or equient of Hindware. Cera, Parryware

S & F Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts and seat cover, including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floor complete, including fixing of PVC flush tank and seat cover as specified and as directed.

Supply only Plastic water closet seat cover any colour, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed all as specified and as directed. (Note: Seat cover make should be same as of WC make)

Supply only PVC low level flushing cistern, 10 litres capacity, with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line all as specified and as directed.

S & F PVC connections 600 mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, all as specified and as directed.

S & F CP fancy bib taps 15mm bore complete all as specified and directed.

S & F 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

S&F 32mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, hoisted 1000litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank 1000 litre capacity and removing to store complete all as specified and directed.

S&F 32 mm outer dia ball /gate valve for , screewd both ends for CPVC pipes and fixed complete all as specified and as directed

S & F Ball valves high 25mm bore pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose) (B) Area exceeding 2.00 sqm each

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and Fixing 10-12 mm thick Toughened glass door, superior quality exc 1.5 sqm in each pane including necessary fittings and fixures, mortice lock, beading screws, bearings, 600mm long and 25mm dia stainless steel handles - 2 Nos in each door etc including Air force embalams/writing work as per design given by Engr-in-charge and as required eitching, cutting for counter etc. Fitting and fixtures as required including fixing details shall be as per manufactures detsils etc. complete all as specified and as directed by Engr-in-charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M&L 19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws anti termite plywood for cabinet boxes and shutters purpose incl cutting, joining, etc & making good, as specified and as directed by Engineer-in-Charge.

M&L modular hinges of any degree opening, as specified and as directed by Engineer-in-Charge.

M&L 20mm width PVC edge band tape for cabinet purpose, complete all as specified and as directed by Engineer-in-Charge.

S&F of modular Stainless steel handles of 4 inch size for cabinet purpose, complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless Steel Door Catcher for cabinet purpose, complete all as specified and as directed by Engineer-in-Charge.

M & L for glazed ceramic coloured tiles with border tile pattern in vertical surfaces 350 x 250 x 7 mm / 450 x350 x7 mm / 300 x 450 x 7 mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10 mm thick cement plaster in 1:3 as backing coat complete all as specified and as directed.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick of size 300mmX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directe.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes ,metal frame,cover plate of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed by Engr -in -charge for One light point / one bell point controlled by one, one way switch.

All as per item No 78 above but, One fan point /Exhaust Pointcontrolled by one switch

All as per item No 78 above but, Oone ding dong bell controlled by on by one switch

All asper Item No 78 above but for One 3 pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 05/06 Amps switch

All asper Item No 78 above but for One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 05/06 Amps switch

M & L point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc,including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed by Engr -in -charge for one 15 /16 Amps socket outlet point on independent

M&L for Sub main wiring/power wiring complete with two runs of 4 Sqmm, PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe,concealed and accessories on surface wall/floors/ with one run of PVC insulated, 4 Sqmm FRLS copper conductor for earth continuity all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

M&L for sub main wiring, complete with 4 runs of 6 sqmm, PVC insulated, unsheathed FRLS cable,1100 volts grade,multi stranded with copper conductor, drawn through and including suitable size of PVC conduit pipe and accessories on surface/wall/ roof etc. with two runss of PVC insulated, 4 sqmm FRLS cable, copper conductor for earth continuity conductor all as specified and as directed.NOTE :- Four runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

Supply and fix Ceiling rose 3 terminal 5 Amps 230 volts PVC/Polycarbonate, insulated body.

S & F electronic fan regulator modular type, 2 module, 120W including complete all as specified and directed.

Supply and fix modular switch 6 Amps 1 way one module complete.

Supply and fix modular switch of 16 Amps single module complete

Supply and fix modular socket 6 Amps three pin socket two module complete.

Supply and Fix modular socket 16 Amps three pin socket four module complete.

Supply and fix MCB DB, SPN, 8 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, double door type suitable for fixing MCBs including connecting etc., complete all as specified and as directed.

Supply and Fixing MCB SP 6 - 32 Amps complete all as required and directed.

Supply and Fixing MCB SPN 32Amps complete all as required and directed.

S&F LED light Fitting 1 x 20 W ,220 V, AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by EIC

S&F LED light Fitting mirror type with high output diffuser 2 feet ,10 W 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by EIC

M/L for providing earthing with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground vertically to depth of not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to GI earth strip of 25x4mm by means of bolts, nuts, washers of GI and provision of earth lead, GI protection pipe with 15mm light grade galvanized including necessary earth work in any type of soil, PCC 1:3:6 type CI (using 20mm graded stone aggregate) earth chamber and 1:2:4 type B1 RCC cover 50mm thick with 6mm dia MS bars, 75 mm c/c, complete all as shown in SSR Pt - 1 electrical plate No 3. Note: Unit rate Quoted is deemed to include the cost or excavation and earth work, RFR, Removal in any type of soil, PCC Chamber, funnel cover etc complete.

M & L Earth continuity conductor or main earthing lead, galvanised iron strip 25 x 4 mm fixed to wall on batten or recess or chases or buried in ground or draw in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etccomplete, as required.

S&F Celing Fan complete with blades , down rods ,elcetrinic regulator and acessories , 230 volts, 1200 mm sweep , min air delevery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed

Supply and fix bell push AC. 230 volts,single pole.

Supply & fixing bell push modular type 6 Amps complete all as specified & directed.

S & F MCB DB SPN 12Way with 200 Amps rated busbar, Double door, flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.

S & F MDB TPN 4Way, Double Door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing in replacement of old U/s complete all as specified and directed.

Supply and fixing 36W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified including taking down old unserviceable fittings.

Supply and install hi wall split units air conditioner indoor/outdoor of capacity 2.0 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2 complete all as specified and directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA

S&F single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos double pole MCB 20 Amps capacity complete all as specified and directed by Engr-in-charge

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1 No. MCB 20 Amp capacity complete all as specified and as directed

Supply and fix electric water heater,storage type ABS body with SS inner tank and heating element upto2 KW capacity 25 litre, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate,NRV, connection piece etc. all as specified & as directed