West Bengal Sdc

Active

Works

ELECTRICAL WORKS ORG

WBPWD/EE/HED/NIT- 182 of 2026-2027

Public Works Department

Jagatballavpur RH | Howrah, West Bengal

Amount: ₹14.4 LCloses: 24 Jul 2026

Tender Value

₹14.4 L

EMD Value

₹28,718

Closing Date

24 Jul 2026, 3:00 pm

Tender Inviting Organisation

Name

Executive Engineer PWD Howrah Electrical Division

Address

Office of the Executive Engineer PWD Howrah Electrical Division Onkarmal Jetia Road Howrah 711103

Work Description

Electrical Repairing and Renovation Work of Labour Room and G and O Operation theatre at Jagatballavpur RH,Howrah. RN26000191.,Project ID HF262750608S000.

Tender Information

Tender ID

2026_WBPWD_5016240_1

Reference Number

WBPWD/EE/HED/NIT- 182 of 2026-2027

Tender Type

Open Tender

Product Category

ELECTRICAL WORKS ORG

Period of Work

21 days

Location

Jagatballavpur RH

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical

RequiredAffidavits (.pdf)

RequiredPrequalification Application, FORM-III,FORM-V (.pdf)

RequiredValid Supervisor Competency Certificate with License to Electrical Contractors (.pdf)

RequiredCredential (.pdf)

RequiredValid Last Three Years Balance Sheet with IT Return (.pdf)

RequiredValid Register Partnership Deed with Register Power of Attorney (.pdf)

RequiredCompany Details (.pdf)

Finance

RequiredBOQ (.xls)

Required2911 (.pdf)

RequiredRTGS/NEFT Details (.pdf)

RequiredNIT (.pdf)

Fee & Financial Details

EMD Fee Amount

₹28,718

Important Dates

Last Activity

2 Jul 2026

Published

2 Jul 2026

Bid Opening

27 Jul 2026

Download Starts

3 Jul 2026

Download Ends

24 Jul 2026

Submission Starts

10 Jul 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (77 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1EI Work , Compound Lighting & AC Machines.
2	Dismantle the existing TPNMCBDBs - 05 nos, SPNMCBDBs - 10 nos, damaged wiring points - 155 nos, damaged ceiling fan - 25 nos , damaged tube lights - 72 nos & other damaged electrical accessories from its position and handed over to the authority with challan as per direction by the EIC. [NS]	1	Item	1,500	₹1,500
3	Supply & fixing of 415V, 200A Porcelain cut out fuse on wooden plank as per direction of DIC. [NS]	3	No	300	₹900
4	Supply, delivery and installation & testing of cubical type compartmentalized dust and vermin proof Floor cum wall mounted L.T. distribution panel, Tentative size 1550x1650x500 mm or suitable higher size from CPRI approved manufacturer , made of 2 mm (14 SWG) thick C.R.C.A M.S. sheet reinforced with (40x40x6 mm) angle iron frame work with individual incoming and outgoing compartment having hinged & gasket door with locking arrangement in such a fashion that it can not be on unless the feeder remains in off position and providing suitable ventilation arrangement. The complete panel board shall be painted in seven tank process by powder coating paint, colour siemens white.The interconnection between Incoming switch and BBC should be done with tinned copper strip and BBC to all outgoing switches interconnection should be done with suitable size copper cable and other accessories including suitable stud connectors, socketing etc as required and A separate continuous GI earth busbar of size 50mm x 6mm shall run across the full length of the panel board .[NS]	1	Each	1,62,725	₹1,62,725
5All electrical equipment are to be properly earthed with suitable size G.I. wire & earthing by nut, bolt in the body complete with base channel. The base of panel board should rest on frame work (75x40x5 mm). The control panel will have suitable cable entry from bottom through cable gland plate to access sufficient no. of cables as per direction of E.I.C. the panel comprising with following switches. The complete panel board is to be installed on suitable brick padestal & All incoming/outgoing switches is to be properly labelled on Acrylic sheet as per direction of EIC. (An Auto Cad Drawing of the panel has to approved by EIC before making of panel)
5.01	ON Load Changeover: 415V, 160 Amp , 3 pole Change over switch - 01 Nos (Make: L&T/ABB)	-	-	-	-
5.02	INCOMING: 415V, 160 Amp , TPN switch disconnector fuse with 03 nos DIN type HRC fuse - 01 Nos (Make: L&T/ABB)	-	-	-	-
5.03	BUSBAR: 415V, 200 Amp 4 nos (4x50x5) mm, copper bus-bar with necessary nos of holes, mounted on non-hygroscopic FRP/SMC/DMC insulator / sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification.- 01 set	-	-	-	-
5.04	415V 125Amp TPN switches disconnector fuse with 3nos HRC fuse- 03 Nos (Make: L&T/ABB) [OPD & MAIN BUILDING & OT Complex]	-	-	-	-
5.05	415V 63Amp TPN switches disconnector fuse with 3nos DIN type HRC fuse- 3 Nos(Make: L&T/ABB) [ SPARE-2 nos & PUMP ROOM ]	-	-	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.40 MB

Work Item Documents

2911.pdf

Tender Documents • 1.86 MB

BOQ_5085549.xls

BOQ • 1.82 MB

Ready to Participate?

Download all tender documents and submit your bid