SPECIAL REPAIR TO BLDG NO. P-22 (OR Living), GRD COMPLEX AND ADDN/ALTN TO TOOL CRIB FOR ELTA/LDP STORES SET UP AT 27 SQN UNDER GE AF GORAKHPUR.

Amount

Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters. complete all as specified as directed.

M&L for Rendering 15mm thick in cement mortar (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 3 storie height mixed with water proofing compound (ISI marked) @ 200 ml per 50 Kg cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. Note 1: - Supply only water proofing compound shall be measured and paid for separately. 2. Cost of scafolding for rendering is incuded in this item. 3: Rendering will be done in two layer. 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick.

M&L rendering 5mm thick (1:3) CM on fair face of concrete surface on ceiling finished even and smooth without using extra cement complete all as specified as directed.

Supply only liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of white cement primer with roller complete all as specified as directed.

M&L for preparation of newly plastered surface and three coat of white wash on ceiling surface incl complete all as specified and directed.

M&L for old preparation of surface of wall / concrete surface and two coat of white wash on old ceiling surface complete all as specified and directed.

M&L for Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of distemper oil emultion complete all as specified as directed.

M&L for Preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of white cement primer with and including 1mm thick JK/Birla wall care putty through mechanical means by authorised OEM complete all as specified as directed.

Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for complete all as specified and directed.

M&L 75mm thick cement concrete (1:3:6) type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection and path laid in panels not more than 3.0 mtr in lenght laid to slope 1:30 including forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 Parts of sand) surface,complete all as specified and directed. (Note:- The quoted tates are deemed to be inclusive of material against work and joints fillings.)

M&L 75mm thick PCC type D-2, (1:4:8) using 40 mm graded stone aggregate in Sub base, etc including 75 mm thick hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified as directed.

M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggr) as in coping and similar works incl necessary from work all as specified.

M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed

Demolition of brickwork and portions ordered to be dismantled built in cement mortar or cement lime mortar complete all as specified as directed.

M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified as directed.

S&F in repair steel water tubing `medium grade’ galvanized 15 mm bore with all fittings of ISI marked medium grade and fixed complete to walls and ceiling concealed and joints fixed with adhesive including taking down complete all as specified & directed.

S&F in repair steel water tubing `medium grade’ galvanized 20 mm bore with all fittings of ISI marked medium grade and fixed complete to walls and ceiling concealed and joints fixed with adhesive including taking down complete all as specified & directed.

S&F in repair 500 ltr capacity rotantional moulded triple layer polythylene water storage tanks white color (cylindrical vertical with closed top ) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I including 20mm dia Ball valves standard of PTMT any colour high pressure with epoxy coated aluminium rod & high density plastic ball screwed,for iron pipe and fixed.(Minimum weight 20mm - 210gms complete all as specified and directed.

S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps ,including waste cupling,waste pipe , complete all as specified and directed.

S&F in repairs for 15 mm bore swan neck pillar taps CP fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed.

S&F in repair brass chromium plated angle stop cock, of 15 mm bore complete all as specified and directed.

S&Fin repair CP bib taps fancy type CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, and fixed for 15mm dia complete all as specified and directed.

S&F in repairs CP Grating doom 100 mm dia with waste hole complete all as specified as directed.

S&F in repair Towel Rail 450mm long of Chriomium plated made out of 20mm dia fixed with and including Chromium plated brassscrews and wooden/plastic cleats (Minimum weight 170gms)

S&F in repair chromium plated shower rose fixing with 15mm bore pipe min 40 grms including long arm 15 mm size 195mm long with bend min wt 40 gms complete all as specified.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed complete all as specified and directed.

S& F in repair Soap dish, any type, fixed toplugs with chromium plated brass screws complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed

M&L 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 75mm PVC (SWR) bends of any radius jointing with solvent cement complete all as specified and directed.

Supply & Fixing in repair 40 mm dia PVC Waste pipe of length not excedding 1 m suitable for sink complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius jointing with solvent cement complete all as specified and directed

Demolition of brick tiles flat or edges pointed in any type of mortar complete all as specified and directed.

Dismantling/Demolition /striping out of existing roof treatment (terfelt and roof plaster etc) including PCC padding of any discription and any thikness including backing and removal the debris complite all asspecified and directed.

M&L for 25 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors , finished smooth .complete as specified and directed.

M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement including washing , rubbing and removal of dirt etc from roof slab complete all as specified and directed. Note:- (Liquid WPC shall be paid separately)

M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 0.25 Kg/Sqm (iii) Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm (iv) Laying of 3 mm thick ProShield APP (Atactic Polypropylene) modified bituminous waterproofing membrane with mineral-top surface with 100mm overlaps, sealed and bonded to the surface by 'torchon sealed' method as per manufacturer's instructions complete all as specified and directed.

M&L for 300mm x 300mm x 7-9mm thick size roof cool tile to reduce room temperaature, slip resistance, ocean blue in colour laid in cement mortar 1:6 and pointing in CM 1:3 over 15mm thick screed bed complete all as specified and directed.

M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tank type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed.

M&L for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar all as specified.

M&L for machine cut prepolished kota stone slab flooring 20-25mm thick over 20mm thick (1:6) cement screed bad laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Ditto as above but as in riser of steps, skirting, dado and pillar laid over 15mm tick cement plaster in CM 1:4….ditto as above….

S&F 20 mm prepolished Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like laid over 20 mm thick screed bed in CM (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed.

Demolition of concrete of any description and in any position not other wise specifically provided for cement concrete reinforced including roof padding, Rcc Tank etc complete all as specified and directed.

M&L for RCC nominal mix (1:2:4) type B-0 using 12.5mm graded stone aggregate as in chajja, fins, fascia and similar suspended work in bld upto 6M height incl use and waste of necessary formwork and scaffolding required

M&L for providing pre-cast RCC lintel ,shelves etc type B-1 ,1:2:4 using 20 mm graded stone aggregate and set in cement mortar in 1:4 for door and window opening including use and waste of form work complete.

M&L for Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete.

Ditto but as in skirting over 10 mm thick cement screed bed in (1:4) complete all as specified and directed.

S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n.exceeding 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete.

S&F Glazed ceramic coloured tiles 450x300x7mm thick in skirting dados risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 15mm thick rcement plaster in cm 1:4 complete all as specified as directed.

Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking of shutter from frame) all as specified and remooving from site complete all as specified as directed.

Taking down chowkats or frame exc 1.5 sqm and n.exe 4 sqm with shutter (with out taking of shutter from frame) all as specified and remooving from site complete all as specified as directed.

S & F factory made Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

S & F factory made Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

M&L for PCC 1:3:6 type C1 (12.5m m graded stone aggreagte) as in hold fast blocks and filling in pressed steel frame and fasning of hold fast incl. Necessary form work

S/F 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003(part I), kilm seasoned and chemically pressure treated complete all as specified as directed.

S&F factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing complete all as specified as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & Drg complete all as specified as directed.

S & F powder coated anodised aluminium (sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 1.5 mm thick, side & top track frame size 92 X 29.5 X 1.5 mm thick and shutter aluminium anodised 39 X 20 X 1.5 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels and stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm incl all fittings & fixture complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples.complete all as specified and directed.

S&F stainless steel curtain rod 18-20 mm dia wit fixing bracket on both side ,end ball stop corner complete all as specified as directed.

S&F in repairs fancy type brackets for fixing of 20mm dia dropery rod complete all as specified and directed.

S&F in repairs Cloth rod with caps and brackets 15 mm dia complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided forwindows grill etc.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type of door and window stopper including all necessary articlesn exc 200 cu. cm each each all specified.

M&L preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer.

M/L preparing new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat off red oxide primer complete all as directed

S&F 75 mm size butt hinges medium weight cold rolled milled steel all as specified.

S&F 100mm size butt hinges medium weight cold rolled milled steel all as specified.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section conplete.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section conplete.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for 150 mm size Aluminium handle cast type anodiesd complete all as specified as directed.

M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not ovided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete.

M&L Providing ATT and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron Note:- (i) ATT Shall be got done by an agency having valid license as per clauses of Indian Insecticide Act and approved by GE. (ii) The agency should be the member of Indian Pest Control Association holding license as per clause No 13 of Insecticides Act 1968. (iii) Persons to do ATT shall be qualified as per rules 1971. AGENCY FOR CARRYING OUT ANTITERMITE TREATMENT (a) M/S Singhal Pesticides, AGRA (b) M/S Crop Health Products Ghaziabad (c) M/S Pest Control India Limited (d) Montari Industries Ltd 75, Nehru Place, New Delhi

Demolition of PCC floor ,plinth and paving not exceeding 15 cm thickness below or above ground level .

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 Nn(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

M&L for fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2 ,modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge.

M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floor finished and an making the surface even and smooth without using extra cement complete all as specified and directed

M&L 100mm thick PCC (1:3:6) type C1 as in sub base of floor and rough finished without using extra cement.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for one light/ fan/ bell point controlled by one switch for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, FRLS PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, FRLS PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :-

All as per item above here in before but for one 3 pin switch socket outlet point 5 Amps on independent board…ditto as above…

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L for Modular socket outlet 2/3 pin combined 2 module, 6 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.

M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L for Modular socket outlet 2/3 pin combined 2 module, 6 Amps/16 Amps Combimed, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete.

S&F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

Taking down old and UNSV light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces all as specified and directed.

Supply and fixing LED lights fitting 1x 36W, 6500K, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Havells Cat No LHEXAPP7IN1W036 or equivalent in Bajaj/ Philips.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Havells Cat No LHEXAZP7PN1W010 or equivalent in Bajaj/Philips

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F in repair brackets made out of 40/50mm dia medium grade GI pipe 0.75 mtr long bent to shape and size fixed on location using new 2 nos 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed.

Supply and fixing in repair factory made epoxy powder coated concealed distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed. Make :Indo asian Or eqvt make of Havells/Legrand

Supply and fixing in repair factory made epoxy powder coated concealed distribution board VTPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed. Make :Indo asian Or eqvt make of Havells/Legrand

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of 100A, 4 pole and current carrying capacity in the DB complete with connection testing and commissioning

Supply and fixing MCB single pole 240 volt 'C' curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one.

Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 40 to 63 Amps complete all as specified and directed .

Taking down old and UNSV sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc all as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit submain wiring,etc., and making good, cutting notexc 10 cm girth complete all as specified

M&L for concealed sub main wiring using two single core FRLS PVC insulated, unseathed stranded copper conductor cable of size 6.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of FRLS PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. Note :- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutters , 300 mm sweep, single phase, 230 Volts AC,1200 RPM, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing and including writing MES No complete all as specified and directed,

Taking down ceiling fan by unscrewing nut , bolts, disconnection of electric cable from ceiling rose, ceiling cable end, removing blades , of any sweep and make and deposit to MES Store all as specified and directed.

Supply & Fixing ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed.

Supply and fixed in replacement of down rod with anti sucide safe fan down rod of 260 mm length suitable for fixing in existing ceiling fan complete with nuts bolts, check nut and washers including making holes by drilling for bolts complete all as specified and directed.

Supply and installation of the electric water storage heater of metal / ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass coating inside the tank alongwith heating element with anticorrosive magnesium anode, NRV, thermostat, indicator and temperature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with G.I. hexagonal adapters/ nuts on both side for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangement and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation and wiriting CA NO and MES No. with synthetic enamel paint as color, style and size decided by engineer in charge including dismantling of old water storage heater and depositing to MES store complete all as specified and directed.

S & F Stop valves, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm dia complete all as specified and directed.

M&L for earthing complete with galvanised steel plate electrode 600 mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel earth wire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with 6mm dia M.S. round bar placed 75mm c/c and handle of 10mm dia, MS bar made to shape, GI medium grade 20 mm bore pipe for watering perforated at bottom, 1.75 meter long placed on top edge of earth plate, common salt & charcoal filling, funnel, wire mesh and earth work not exceeding 50 meters all as per electrical plate No 5 of SSR Part I (2009) and connected to earth test points all as specified and directed after testing including dismantling of old earthing on complete all as specified and directed. (Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.)

Comfort AC and Refg. Engineers (BID ID -3473184)

M/S NITISH ASSOCIATES (BID ID -3473073)

M/s B. P. Construction (BID ID -3473578)

M/S GUPTA TRADERS (BID ID -3473598)

H R ENGINEERS (BID ID -3470707)

M/S PRATAP ENTERPRISES (BID ID -3471735)

M/S EASTERN TECHNOCRAFTS (BID ID -3473769)