REPAIR WORK OF PHYSIOLOGY, PHARMACOLONY AND PHARMACOGNOSY LAB IN GOVERNMENT POLYTECHNIC COLLEGE JALANDHAR

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR

Name of Work :- DNIT FOR REPAIR WORK OF PHYSIOLOGY, PHARMACOLONY AND PHARMACOGNOSY LAB IN GOVERNMENT POLYTECHNIC COLLEGE JALANDHAR

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 A1) REPAIR WORK OF PHYSIOLOGY, PHARMACOLONY AND PHARMACOGNOSY LAB 2

2 Dismantling concrete (e) Reinforced cement concrete 3 Cum Excess(+) Full Conversion INR

3 Scraping (c) Cement plaster 4 Sqm Excess(+) Full Conversion INR

4 12.5 mm thick cement plaster 1:5 5 Sqm Excess(+) Full Conversion INR

5 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 6 Cum Excess(+) Full Conversion INR

6 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 7 Qtl Excess(+) Full Conversion INR

7 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. 8 Sqm Excess(+) Full Conversion INR

8 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. 9 Cum Excess(+) Full Conversion INR

9 Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) a) Size 600x600 mm 10 Sqm Excess(+) Full Conversion INR

10 Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge 11 Sqm Excess(+) Full Conversion INR

11 Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) 12 Sqm Excess(+) Full Conversion INR

12 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 13 Sqm Excess(+) Full Conversion INR

13 Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999): (iv) 35mm thick 14 Sqm Excess(+) Full Conversion INR

14 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) ii) For shutter area above 0.50 sqm 15 Sqm Excess(+) Full Conversion INR

15 Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. 16 Sqm Excess(+) Full Conversion INR

16 Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. 17 Sqm Excess(+) Full Conversion INR

17 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. 18 Sqm Excess(+) Full Conversion INR

18 A2) ELECTRICAL WORK 19

19 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 20

20 (iv) Wiring 6Amp. wall socket point 21 Each Excess(+) Full Conversion INR

21 (v) Wiring 6Amp. Plug control comprising wall socket point 22 Each Excess(+) Full Conversion INR

22 (vi) Wiring 16/20Amp. power plug control point 23 Each Excess(+) Full Conversion INR

23 RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): (x) Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (b) Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories). 24 Each Excess(+) Full Conversion INR

24 PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 25

25 (i) Overall size 1sq.mm (Un-sheathed) 26 Metre Excess(+) Full Conversion INR

26 (ii) Overall size 1.5sq.mm (Un-sheathed) 27 Metre Excess(+) Full Conversion INR

27 (iii) Overall size 2.5sq.mm (Un-sheathed) 28 Metre Excess(+) Full Conversion INR

28 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (xii) Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed) 29 Metre Excess(+) Full Conversion INR

29 MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 30

30 (ii) MCB Single Pole 6-32amp. (10kA, Curve-C) 31 Each Excess(+) Full Conversion INR

31 (x) MCB Triple Pole 6-32amp. (10kA, Curve-C) 32 Each Excess(+) Full Conversion INR

32 B3) PUBLIC HEALTH 33

33 Sub Head-1 Internal Water Supply System 34

34 CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. 35

35 b) CPVC SDR 11 Pipe & fitting 20m mo/d 36 Mtr Excess(+) Full Conversion INR

36 c) CPVC SDR 11 Pipe & fitting 25mmo/d 37 Mtr Excess(+) Full Conversion INR

37 Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75mm x 75mm 38

38 qty same as CPVC P 20mm +25 mm 39 mtr Excess(+) Full Conversion INR

39 Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. 40

40 Through wall 11.43 cm thick 41 nos Excess(+) Full Conversion INR

41 Through wall 22.86 cm thick 42 nos Excess(+) Full Conversion INR

42 Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 43

43 25mm i/d Brass Ball valves 44 2 Each Excess(+) Full Conversion INR

44 20 mm i/d Brass Ball valves 45 2 Each Excess(+) Full Conversion INR

45 Sub Head-2 Internal & External Sewerage System 46

46 Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonagepipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 47

47 Single Socket Type B 48

48 c) 90mm o/d SWR UPVC pipe lines laid complete 49 0.0 Mtr Excess(+) Full Conversion INR

49 Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 50

50 For 90 mm o/d pipes 51

51 ii) Single Tee With Door 52 Each Excess(+) Full Conversion INR

52 v) Elbow 90 Degree (all side socketed) 53 Each Excess(+) Full Conversion INR

53 vi) Vent Cowls 54 Each Excess(+) Full Conversion INR

54 viii) Coupler 55 Each Excess(+) Full Conversion INR

55 xi) Single Y-Junction 56 Each Excess(+) Full Conversion INR

56 Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) 57

57 90mm o/d 58 40 Nos Excess(+) Full Conversion INR

58 Dismantling rain water pipes of ACC/CI with clamps and specials etc. 59 60 Mtr Excess(+) Full Conversion INR

59 Cement concrete 1:2:4 60

60 a With stone ballast or shingle 61

61 mixing by mechanical means using concrete mixer volumetric type 62 7.7 cu.m Excess(+) Full Conversion INR

62 Sub Head-3 Sanitary Installation 63

63 Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer-in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect.Size 470mmx370mmx180mm 64

64 Size 470mmx370mmx180mm 65 Each Excess(+) Full Conversion INR

65 Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge ) complete in all respect. 66

66 Laboratory cock swan neck One Way 67 Each Excess(+) Full Conversion INR

67 Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect 68

68 PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut 69 Each Excess(+) Full Conversion INR

69 Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. 70 Each Excess(+) Full Conversion INR

70 Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect 71

71 C.P.brass 15mm Angle valve without flange 72 Each Excess(+) Full Conversion INR

72 Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. 73 Each Excess(+) Full Conversion INR

73 Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. 74

74 C.P. Brass extension piece, 25mm long to 50mm long 75 Each Excess(+) Full Conversion INR

75 Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. 76 10 Each Excess(+) Full Conversion INR

76 Providing and fixing in position SS Gratingwith frame of approved make (to the approval of engineer in charge) complete in allrespects 77 Each Excess(+) Full Conversion INR

77 Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. 78

78 Wash Hand Basin / Urinal Pot 79 Each Excess(+) Full Conversion INR

79 CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap 80 Each Excess(+) Full Conversion INR

80 P/F Manifold with Fittings with 10 point (1/2'') 81 2 set Excess(+) Full Conversion INR

81 P/F NRV 82 20 Pcs Excess(+) Full Conversion INR

82 P/F SS Female Threaded Adoptor (20mm X 1/2'') 83 20 Pcs Excess(+) Full Conversion INR

83 P/F Gas Pipeline (LPG)- MS Pipe -B Class With heavy Fittings(1/2'') 84 360 Ft. Excess(+) Full Conversion INR

84 P/F Gas valve,Screwed Main (15mm) 85 8 Pcs Excess(+) Full Conversion INR

85 P/F LPG pipeline for Burner(1/2'') 86 40 Pcs Excess(+) Full Conversion INR

86 P/F Pressure Gauge 87 2 Pcs Excess(+) Full Conversion INR

87 P/F Clamp (1/2'') 88 60 Pcs Excess(+) Full Conversion INR

88 P/F Pre Set Regulator (1/2'') 89 2 Pcs Excess(+) Full Conversion INR

89 P/F Ball valve(1/2'') 90 40 Pcs Excess(+) Full Conversion INR

90 P/F Line Filter Valve (1'') 91 2 Pcs Excess(+) Full Conversion INR

91 P/F MS Burner 92 40 Pcs Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information