Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.7 Craccepted-finance | ₹1.7 Cr | accepted-finance |
Tender Value
₹1.6 Cr
EMD Value
₹2.4 L
Closing Date
5 Feb 2026, 9:30 pmClosed
Public Works Department
EE PWD Dharwad
Improvements to Yamanur Halkusugal via Padesur Shanwad Major District Road from CH km 7.50 to km 9.55 and CH km 9.95 to km 10.16 (Selected reaches) in Navalgund Taluk of Dharwad District.
PWD/2025-26/RD/WORK_INDENT31510
PWD/2025-26/RD/WORK_INDENT31510
Open
Roads
Two Tender Document System(Two Cover)
PWD Division Office Dharwada
₹3,990
₹2.4 L
5 Feb 2026
18 Jan 2026
6 Feb 2026
4 Feb 2026
4 Feb 2026
FOR TENDERS upto RS.200.00 LAKHS 64.22
Tender amount 15935718.95 159.36 For Milestone 1: 4780.72 Rs. per day
EMD 1.5% 239035.78 239100 For Milestone 2: 4780.72 Rs. per day
Completion period 6.00 100000 For Milestone 3: 6374.29 Rs. per day
Annual turnover 318.72 139100
Similar nature work 79.68 0.00
LOC Liquidity assets 79.68
Estimated quantities 80%quantities
#REF! #REF! 64.22
Total Quantity 80% Quantity
Order Item Details Floor/Lift No. Base Rate Final Rate (Excluding GST) Quantity Net Amount (Excluding GST) Actions 80% 15%
1 Category : Vol - 3 -Chapter -16- PANCHAYATH RAJ ENGINEERING DEPARTMENT ITEMS --- 25 26.25 459.25 12055.31 183.7 146.96 0.08
Item Code : 16.8.b 0 0.00
Item Description : Surface Drains in Soil - Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. - Mechanical Means. Ref to MoRT&H : IRC - 307 0 0.00 E/W 3261.06
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
2 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 493 517.65 3406.28 1763260.84 2725.024 11.06 GSB 895.41
Item Code : 3.6 0 0.00 WMM 725.59
Item Description : Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref to MoRT&H : IRC - 305 0 0.00 Asphalt work(including BM/DBM/BC/SDBC)/MSS 217.68
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
3 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2487 2611.35 1119.26 2922779.6 895.408 18.34 PCC/RCC/PQC 289.10
Item Code : 4.1.A.v 0 0.00
Item Description : Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 - For Grading -V Material. Ref to MoRT&H : IRC - 401 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
4 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2559 2686.95 906.99 2437036.78 725.592 15.29
Item Code : 4.17 0 0.00
Item Description : Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory rollerto achieve the desireddensity. Ref to MoRT&H : IRC - 406 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
5 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 9000 9450 1 9450 0.8 0.06
Item Code : 8.54 0 0.00
Item Description : Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804. Ref to MoRT&H : IRC - MoRTH 804 0 0.00
Unit : No. 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
6 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 530 556.5 183.7 102229.05 146.96 0.64
Item Code : 8.15 0 0.00
Item Description : Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Ref to MoRT&H : IRC - 803 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 3562 3740.1 5 18700.5 4 0.12
Item Code : 8.5.iv 0 0.00
Item Description : Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022 - 60 cm equilateral triangle 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 5017 5267.85 3 15803.55 2.4 0.10
Item Code : 8.16.i 0 0.00
Item Description : Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 5th kilometre stone (precast). Ref to MoRT&H : IRC - 805 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
9 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 820 861 3 2583 2.4 0.02
Item Code : 8.16.iii 0 0.00
Item Description : Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). Ref to MoRT&H : IRC - 805 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
10 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 8995 9444.75 1 9444.75 0.8 0.06
Item Code : 8.7 0 0.00
Item Description : Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. Ref to MoRT&H : IRC - 801 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
11 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 719 754.95 65.62 49539.82 52.496 0.31
Item Code : 2.8.ii.a 0 0.00
Item Description : Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead - Lime /Cement Concrete - By Mechanical Means - Cement Concrete Grade M-15 & M-20 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
12 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 1096 1150.8 14 16111.2 11.2 0.10
Item Code : 2.17.ix.B 0 0.00
Item Description : Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. - Above 600 mm to 900 mm dia 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 1 -Chapter -I- Earth Work --- 102 107.1 486.35 52088.08 389.08 0.33
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2816.1 172.36 485383 137.888 3.05
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 6213.9 70.26 436588.61 56.208 2.74
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6865.27 140.67 965737.53 112.536 6.06
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 7846.02 13.8 108275.08 11.04 0.68
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
18 Category : Vol - 1 -Chapter -II- Concrete Works 0 6734 8484.84 11.92 101139.29 9.536 0.63
Item Code : 2.5.2 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
19 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 7192.18 87.22 627301.94 69.776 3.94
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
20 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 8826.77 37.5 331003.88 30 2.08
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
21 Category : Vol - 1 -Chapter -II- Concrete Works 0 76329 80145.45 20.9 1675039.9 16.72 10.51
Item Code : 2.11.c 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Sub structure of Bridges 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
22 Category : Vol - 1 -Chapter -II- Concrete Works 0 76554 80381.7 1.61 129414.54 1.288 0.81
Item Code : 2.11.d 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Super structure of Bridges 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
23 Category : Vol - 3 -Chapter -12- SUB-STRUCTURE OF BRIDGES --- 239 250.95 68.95 17303 55.16 0.11
Item Code : 12.2 0 0.00
Item Description : Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Ref to MoRT&H : IRC - 2706 & 2200 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
24 Category : Vol - 3 -Chapter -12- SUB-STRUCTURE OF BRIDGES --- 2677 2810.85 89.78 252358.11 71.824 1.58
Item Code : 12.4 0 0.00
Item Description : Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. Ref to MoRT&H : IRC - 710.1.4. of IRC :78 & 2200 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
25 Category : Vol - 3 -Chapter -12- SUB-STRUCTURE OF BRIDGES --- 1168 1226.4 149.62 183493.97 119.696 1.15
Item Code : 12.3.A 0 0.00
Item Description : Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1.4. of IRC :78 & 2200 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
26 Category : Vol - 3 -Chapter -13- SUPER-STRUCTURE OF BRIDGES --- 6727 7063.35 12 84760.2 9.6 0.53
Item Code : 13.8 0 0.00
Item Description : PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
27 Category : Vol - 3 -Chapter -13- SUPER-STRUCTURE OF BRIDGES --- 11201 11761.05 24 282265.2 19.2 1.77
Item Code : 13.9 0 0.00
Item Description : Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 1500, 1600, 1700 & 2704 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
28 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 733 769.65 12 9235.8 9.6 0.06
Item Code : 8.18 0 0.00
Item Description : Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting. Ref to MoRT&H : IRC - 807 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes
S.No Item Details Rate INR (Excluding GST) Quantity Is BuyBack Minimum BuyBack Value
Item Name : Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. 0 0.00
Unit : Sqm 0 0.00
Item Name : Tack coat on Bituminous surface - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m² on the prepared bituminous surface cleaned with mechanical broom 0 0.00
Unit : Sqm 0 0.00
Item Name : Bituminous Macadam Grading - II for traffic less than 20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction 0 0.00
Unit : Cum 0 0.00
Item Name : Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. IRC-37:2018 0 0.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid document kw-4 wi 31510.docx
Tender Document • 1.16 MB
road specification.pdf
Others - Road Specification • 1.52 MB
government notification BC LOC letter to be issued by the Bank.pdf
Others - LOC Format • 1.73 MB
concrete specification.pdf
Others - Concrete Specification • 0.14 MB
31510.xlsx
Others - Qty format • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .