Construction of Proposed 8TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & SECONDARY SHED) AT SIDLAGHATTA CMC LAND FILL SITE

Construction of Proposed 8TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & SECONDARY SHED) AT SIDLAGHATTA CMC LAND FILL SITE

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR)

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 20mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifica...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Supply, erection, testing and commissioning of LT Control Panel panel cubicle type made out of 14/16 Swg MS CRCA sheet which is derusted,degreased, phosphated and passivated with angle iron skeleton ...

Supply, erection, testing and commissioning of LT Control Panel panel cubicle type made out of 14/16 Swg MS CRCA sheet which is derusted,degreased, phosphated and passivated with angle iron skeleton ...

LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 ...

LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 ...

LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 ...

LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 ...

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.3.5Cx50 Sqmm Al Ar cable

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class4Cx25 Sqmm Al Ar cable

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class4Cx16 Sqmm Al Ar cable

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class4Cx10 Sqmm Cu Ar cable

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class4Cx6.0 Sqmm Cu Ar cable

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class3Cx6.0 Sqmm Cu Un Ar cable

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class3Cx4.0 Sqmm Cu Un Ar cable

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.50 Sqmm Preinsulated lug.CPTAU

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point25 Sqmm Preinsulated lug.CPTAU

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point16 Sqmm Preinsulated lug.CPTAU

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point 10 Sqmm Preinsulated lug.CPTAU

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point6.0 Sqmm Preinsulated lug.CPTAU

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point6.0 Sqmm Preinsulated lug.CPTAU

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point4.0 Sqmm Preinsulated lug.CPTAU

Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fix...

Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fix...

Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fix...

Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fix...

Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for po...

Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for po...

Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for po...

Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for po...

Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for po...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. Switches & sockets outlets in Existing modular box 6A one way switch

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. Switches & sockets outlets in Existing modular box6A three way switch

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. Switches & sockets outlets in Existing modular box Stepped fan regulator

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. Switches & sockets outlets in Existing modular box 6/16A Universal socket

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip

Guy Wire & GI Wire as per IS-2141 8 SWG GI Wire

(4.064 mm Dia), Std Wt: 131 Kg/KM ,

Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall.Supplying & Laying cable trays i...