SITC of Complete Discharge Bowl Assembly of 2.12 Cumec Pump at PS IV with supply of other pumps spares at PS IV and SITC of 33KV Outdoor Porcelain clad VCB at PS IV, Providing and fixing, supply of various HT Panel spares at PS I to IV of Kumbha Ram

SITC of Complete Discharge bowl assembly conforming to IS: 1710 & min. efficiency not less than 87% having Rated discharge capacity and total static head complete with all accessories as per specification & approved make , including work of dismantling of existing pump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump, and carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run & one year defect liability. For Additional technical parameters of product / work refer Annexure 'A' attached with this BSR (Design discharge 2.12 cumec, For static head 4 meter to 6 meter)

Bearing 29324 E1

Bearing 29320 E1

Bearing 29332 E1

Bearing 6040

Bearing 6030

Providing and Fixing of pressure gauge for VT Pump including replacement of GI joints, nipples and proper arrangement

Providing and Fixing of Temperature meter for VT Pump bearing housing including replacement of GI joints, nipples and proper arrangement

Supply of Top shaft fitted with shaft sleeves for following rating pump (material SS-410) 2.81/3.75 cumec pump of static head 9 to 12 meter (Old Pump)

Supply of Top shaft fitted with shaft sleeves for following rating pump (material SS-410)1 to 2.15 cumec pump of static head 9 to 12 meter (old pump)

Supply of motor pulley (coupling) with coupling nut and bolts, keys (to couple VT Pump with motor)

Supply of Pump pulley (coupling) with coupling nut and bolts, keys (to couple VT Pump with motor)

SITC of 33KV, 1250 A, STC 25 KA Outdoor Porcelain clad VCB with all accessories including steel structure base ,concrete foundation as per site requirement confirming to relevant IS code with latest amendments ,

Providing and Fixing of Motor Spring Charging Mechanism (Drive Mechanism) For VCB

Providing and Fixing of 8 Channel temperature scanner input J/K/Pt100/RTD output: 4 Relay+ RS 485 mod bus communication in Panel including making connections ,testing at site

Supply of TIMER For Spring Charging Motor Circuit Of VCB 230V AC

Supply of Micro Switch For Spring Charging Motor Of VCB

Providing,fixing,testing of Anti-dust, splash proof and anti magnetic, mild steel constructed, rechargeable battery operated, digital LED display 10 Tonne capacity Crane Scale with alloy steel die pressed bow shackle and 360°rotating lifting hook with safety latch. Equipped with RF wireless remote control and external battery charger with feature of Weight Accumulation Function, Auto Sleep / Power Down Function for Save battery, overload protection.

24 point connector heavy duty type 16 Amp ( Male - Female set)

Supply of Core balance current transformer (CBCT) For VCB panel RATIO : 50/1A CLASS : PS

Supply of Numerical Motor protection relay consisting of various functions for various over current and earth fault protection, Negative Phase Sequence Protection, Phase Reversal Detection, Thermal overload Protection, Locked rotor/Motor stall, Breaker Failure Protection,Undervoltage, Overvoltage protection, Trip circuit supervision etc and other protective functions as per specification .coil voltage as per requirement

Supply of UNDER VOLTAGE RELAY for protection against Over Voltage, Zero/Negative/positive sequence Over Voltage, Under Voltage, Phase Sequence, Phase Reverse, Phase Failure

Supply of 3 O/C & 1 E/F Numerical Type IDMT RELAY for over current and earth fault protection

Supply of Earth leakage relay /sensitive Earth fault relay

Supply of Plug-in type Auxiliary relay for auxiliary protection, Contact Multiplication, Anti Pumping

Supply of Limit switch NO- NC

Supply of Auxiliary switch assembly -10 Way for VCB panel

Supply of 24 Core Industrial Flexible Copper Cable, PVC Insulated, PVC Round Sheathed conforming to IS 694:1990 with Flexible Bright Annealed Copper Conductor for Voltage Grade up to 1100 Volts of following size (0.5 Sq mm)