REPAIR/ MAINT OF INTERNAL ELECTRIC POINT WIRING AND SUB MAIN WIRING IN MD ACCN UNDER GE (N) BATHINDA AT BATHINDA MIL STN

Taking down carefully aluminium point wiring for light points, fan points, socket outlets, or power points, complete with removal of accessories and fittings such as hylam sheet switchboards, switches, ceiling roses, pendant holders, sockets, fan regulators, etc., excluding concealed conduits and sunken boxes. The work shall include making good all disturbed wall and floor surfaces to match the existing finish, complete in all respects as specified and directed by the Engineer-in-Charge.

Material and labour for concealed Modular type point wiring in existing PVC conduit complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and in existing PVC rigid conduit ,in and including Modular Metal flush sunken box of suitable size including new Modular White cover plate with frame mounting switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc complete all as specified and as directed by Engineer-in-charge.

All as per item No 02 here in before but for socket outlet 3/5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 02 here in before but for socket outlet 3/5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 02 here in before but for socket outlet 6 pin, 15/16 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.

All As per item No 02 in before but for one light point controlled by Two Two way switch, complete all as specified and directed by Engineer-in-charge.

All As per item No 02 in before but for bell/buzzer point, complete all as specified and directed by Engineer-in-charge.

Supplying and fixing a batten holder of polycarbonate body, rated 5/6 Amps, 250 Volts, in replacement of the existing holder, fixed on the existing junction box. The work shall include making all electrical connections, testing, commissioning, and providing screws and other minor accessories required for fixing, complete as specified and directed by the Engineer-in-Charge.

Supplying and fixing a surface-type ceiling rose with polycarbonate insulated body, 2 or 3 terminals, Topline series (approximately 20 × 65 mm), rated 5/6 Amps, 250 Volts, in replacement of the existing ceiling rose. The work shall include fixing on the existing junction box, making all electrical connections, testing, commissioning, and providing screws and other fixing accessories, complete as specified and directed by the Engineer-in-Charge.

Supplying and fixing a modular type one-way switch, rated 5/6 Amps, 250 Volts, in replacement of the existing switch on the switchboard. The work shall include fixing the switch, making all necessary electrical connections, testing, commissioning, and completing the work as specified and directed by the Engineer-in-Charge.