Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.2 LAccepted-AOC 5 127 16 GANESH GARDEN KADAMPADI SULUR COIMBATORE TAMILNADU 641401 | COIMBATORE | TAMIL NADU | 641401 | L1 | Accepted-AOC AWARD OF CONTRACT | |
| 2 | L2₹51.0 L+₹1.3 L (2.57%)Rejected-Finance 7 345 C 1 AERO NAGAR KANGEYAMPALAYAM KADAMPADI SULUR COIMBATORE TAMIL NADU 641401 | COIMBATORE | TAMIL NADU | 641401 | L2 | Rejected-Finance BEING NOT LOWEST TENDER | |
| 3 | L3₹51.2 L+₹1.4 L (2.91%)Rejected-Finance | L3 | Rejected-Finance BEING NOT LOWEST TENDER | |
| 4 | L4₹51.9 L+₹2.2 L (4.45%)Rejected-Finance NO 2 16 KANGAYAMPALAYAM SULFUR PO COIMBATORE 641 401 | COIMBATORE | COIMBATORE | TAMIL NADU | 641401 | L4 | Rejected-Finance BEING NOT LOWEST TENDER | |
| 5 | L5₹52.1 L+₹2.4 L (4.77%)Rejected-Finance 2 375 ARAVENU POST KOTAGIRI THE NILGIRIS TAMIL NADU 643 201 | KOTAGIRI | THE NILGIRIS | TAMIL NADU | 643201 | L5 | Rejected-Finance BEING NOT LOWEST TENDER |
Tender Value
Refer Docs
EMD Value
₹99,600
Closing Date
7 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF SULUR
Garrison Engineer AF Sulur Military Engineer Services Kangayampalayam Post Sulur Coimbatore 641 401
SPECIAL REPAIR TO TOILETS AND SEWAGE NETWORK TO AIRMEN LIVING-IN-ACCN AT 5 BRD, SPECIAL REPAIRS TO SMALL ARMS FIRING RANGE AND CERTAIN MINOR WORK AT AF STN SULUR
2022_MES_552003_1
8525/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE AF SULUR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
GE AF SULUR
₹99,600
Yes
19 Oct 2022
14 Sept 2022
8 Oct 2022
14 Sept 2022
7 Oct 2022
1 Oct 2022
14 Sept 2022 - 23 Sept 2022
Amount
SCHEDULE A BOQ
Complete removal of existing water proofing treatment and expose of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to out side the MoD land by providing following :-
(a) Dismantling existing cement concrete/roof tiles on roof including removing debris to out side MD land as directed.
(b) Bring upto the slope by providing filling of light weight materials such as cinder, light weight concrete etc as required, and then providing PCC 1:2:4 type B1 of average thickness of 50mm.
(c) Rendering 10mm thick in CM 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 3% by weight of cement.
(d) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried.
(e) After the primed surface has dried, apply a coat of hot blown bitumen (85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface
(f) Providing APP modified water proofing as approved by GE weighing not less than 4kg per sqm unrolled over the bituminous coated surface with 100mm over laps, the overlap shall be sealed by flame as per manufacture instructions complete.
(g) Over the APP membrane, apply evenly a tack coat of hot air blown bitumen of grade 85/25 at the rate of 1.20 kg per sqm including cleaning of surface.
(h) Applying a coat of aluminium paint at the rate of 100 gm per sqm as per manufacture instruuction over bituminous layer complete all as directed.
(j) Contractor has to submit written performance guarantee for 10 years and security deposit @ 3% cost of water proofig treatment for 10 years on completion of work.
(k) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface.
M&L 20mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. including taking down existing water tubing complete all as specified and as directed
M&L 25mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. including taking down existing water tubing complete all as specified and as directed
Note for item No 13 & 14 :- (a) The unit rate shall be include for taking down existing unserviceable pipe and connections and all fittings as directed.
(b) The unit rate shall be include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accssories such as pipe hooks, screws clamps etc
(c ) Wall thickness of pipes shall be all as per IS : 15801
M&L Cutting chases, pinning in brick wall, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and as directed.
S&F PP-R Gate valves (brass insert) as per requirement of the site 20mm outer dia of pipe including taking down existing one complete all as specified and as directed.
S&F PP-R Gate valves (brass insert) as per requirement of the site 25mm outer dia of pipe including taking down existing one complete all as specified and as directed.
S&F in repairs vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe ) including provision of lime concrete bedding complete all as specified and as directed.
M&L Vitreous china wash down water closet pan (semi pedestal pattern), Anglo Indian type, white (exluding fixing bolts, flushing cistren and flushpipe) and including seat cover for pedestal pattern complete fixed including taking down existing one complete all as specified and as directed.
S&F in repairs Vitreous China white coloured bowl urinals, angle back of size 430 x 370 x340 mm (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and as directed.
S&F in repair Vitreous china white coloured urinal partition of size 310 x 700mm, fixed about 40cm above floor line, complete all as specified and directed by Engineer-in-Charge .
S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed
S & F in repairs PVC connections 15mm size with PTMT Nuts of length 600mm complete as directed by Engr-in-charge.
S&F in repairs Wash basin vitreous china (flat back and angle back Type) size 550x400mm excluding taps waste chain and plug and porceline stopper and brackets, but including cutting for and pinning in ends of brackets or erecting stand with waste pipe fixed complete all as specified and as directed
S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed
S&F 32mm bore dia of pipe Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified
S&F Towel rail 24" long for wash basin including taking down existing one complete all as specified and as directed. Make:- CAT Part No-ACN-1111NM of Jaguar series or equivalent make of hindware / parryware
M&L Glass self assembly including taking down existing one complete all as specified and as directed. Make : CAT Part No-ACN-1173 continental of Jaguar series or equivalent make of Parriware /Hindware
S&F PVC Dual flush ceramic colour, low level, 10 litres capacity, star white with inlet float ball valve, PVC flush pipe and handle, making proper fixing and hanging arrangements Including taking down existing one complete all as specified and as directed. Make :- Cat Part No 21029 of hindware or equivalent of make Cera/ Parryware
S&F in repairs PVC (SWR) P trap 110 mm bore complete all as specified and as directed
S&F PVC in repairs (SWR) S trap 110 mm bore complete all as specified and as directed
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall including taking down existing PVC pipes (any size) along with all fittings etc complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall including taking down existing PVC pipes (any size) along with all fittings etc complete all as specified and as directed.
S&F 110 bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down existing PVC pipes (any size) along with all fittings etc complete all as specified and as directed.
S&F 75 bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down existing PVC pipes (any size) along with all fittings etc complete all as specified and as directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed
S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and as directed
S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and as directed
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and as directed
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and as directed
S&F 110mm PVC (SWR) junction double (double T) equal or unequal provided with access door complete all as specified and as directed
S&F 75mm PVC (SWR) junction double (double T) equal or unequal provided with access door complete all as specified and as directed
S&F 110mm PVC (SWR) couplers complete all as specified and as directed
S&F 75mm PVC (SWR) couplers complete all as specified and as directed
S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed
S&F 75mm PVC (SWR) vent cowl complete all as specified and as directed
S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed
S&F in repairs 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed
Demolition of cement concrete un-reinforced of any description and in any position not otherwise specifically provided for
M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
Note for item No 55 :- The work shall be carried out by authorised and qualified applicators of the above mentioned manufacturers.
M&L Plain Cement Concrete type E2 1:5:10 (using 40mm graded granite stone aggregate) in sunken floors, filling and mass concrete complete all as specified and directed.
M&L 25 mm thick Plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in sub base , as floor concrete or as in receiving tiles/ surface channels and drains etc complete all as specified and as directed.
Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and Material and labour for Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado skirting including 10mm thick 1:3 backing coat complete all as specified and directed.
Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and Material and labour for Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.09 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10mm thick for laying floor finishes in cement mortar (1:4) complete all as specified and as directed.
Note for item No 59 & 60 :- The manufacturer's test certificate and individual test certificate of Tiles must be submitted for approval by the concerned authority prior to installation.
S&F Bib Cock with wall flange screwed down screwed for iron pipe in repairs 15mm bore CAT Part No CQT -23047 of Jaquar or equivalent to Parryware/Hindware/Cera including taking down existing one complete as directed by Engr-in-charge.
S&F Wall mounted Shower Arms 190mm long flat shape for wall mounted shower with flange including taking down existing one complete all as specified and directed Make :CAT Part No-SHA-483 of Jaguar or equivalent make of parriware /hindware.
S&F Overhead Shower 105mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including taking down existing one complete all as specified and as directed. Make :CAT Part No- OSH-1709 of Jaguar or equivalent make of parriware /hindware.
S&F Angular stop cock with wall flange, valves high pressure screwed both ends iron pipe or for unions 15mm dia, including taking down existing one Complete all as specified and as directed. Make :- CAT Part No CQT-23059 of JAGUAR or equivalent to Hindware/Cera
Taking down chowkhat or frame(wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.
S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails and MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.
Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel complete all as specified and as directed.
S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
Demolition of brick work masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.
M & L brickwork with fly ash’ bricks using with modular bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed
M&L PCC (1:2:4) Type B-0 (using 12.5 mm graded stone aggregate) as in coping including necessary form work finished fair and even surface without using extra cement including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.
M&L Providing cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.
M&L Rendering 15 mm thick in two layers on brick or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and as directed.
Note for item No 75 :- (a) Water proofing compound shall be measured and paid seperately.
(b) Cost of scaffolding required deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account.
Supply only integral water proofing compound complete all as specified and as directed. Make:-Dr. Fixit , Pidi Proof or equivalent.
M&L Precast RCC 1:2:4, Type B–1 using 20mm graded stone aggregate as in landings, cover slabs [for manholes etc], chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and as directed.
S&F High strength corrosion resistant TMT bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified.
M&L Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed.
M&L Salt-glazed stoneware drain pipes, 150 mm bore, laid in trenches and jointed as specified, complete including taking down existing damaged pipe,of any size including damaged haunching/ bed concrete etc complete all as specified and as directed.
M&L Plain cement concrete (1:3:6) type C2 (40 mm graded stone aggregate) as concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of size 150 mm bore of pipe, complete all as specified and as directed.
Dismantling the existing unservicible gully trap including chamber and material and labour for provision of new salt glazed stoneware gully trap, square or round mouth type "P" of size 180X150mm, including setting and jointing in cement mortar 1:1 in chamber with plain cement concrete base in PCC 1:2:4 type B1, brick work in cement mortar 1:4, rendering in cement mortar 1:4, all around finished even and fair using extra cement, Precast cover slab in RCC 1:2:4 type B1 using 20mm graded stone aggregates, reinforcement with 6mm dia in both ways etc, including provision of handle etc complete all as specified and as directed.
S&F Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
Supply and fixing 5mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n. exc. 0.50 Sqm each pane complete all as specified and as directed.
M&L Rendering 10 mm thick in cement mortar 1:4 on walls of fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls, or concrete or ceilings etc, including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering etc. complete all as specified and directed.complete all as specified and directed.
M&L preparation of newly plastered surfaces and applying three coats of white washing on walls surfaces complete all as specified and as directed.
M&L Rendering 5 mm thick in cement mortar 1:3 on ceiling of concrete surfaces, finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls, or concrete or ceilings etc, including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering etc. complete all as specified and directed.complete all as specified and directed.
M&L preparation of newly plastered surfaces and applying three coats of white washing on ceiling surfaces complete all as specified and as directed.
M&L Bullnosed chequered cement concerete tiles 32cm x 20cm x 30 cm thick machine pressed set jointed and pointed in neat cement slurry as in treads and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) including dismantling existing tiles complete all as specified and as directed Note :- The manufacturer's test certificate and individual test certificate of tiles must be submitted for approval by the concerned authority prior to installation.
M&L Chequered cement concerete tiles 20cm x20cm x 25mm thick machine pressed set jointed and pointed in neat cement slurry on vertical surfaces as in skirting, dados and risers of steps and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 10mm thick for laying floor finishes in cement mortar (1:4) including dismantling existing tiles complete all as specified and as directed. Note :- The manufacturer's test certificate and individual test certificate of tiles must be submitted for approval by the concerned authority prior to installation.
S&F in repair Mild Steel ordinary rat tail rod pattern springs, 375mm long including roller and roller plate complete all as specified and as directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and as directed
M&L 100 mm thick Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base , as floor concrete or as in receiving tiles/ surface channels and drains etc complete all as specified and as directed.
M&L Chequered cement concrete tiles 20cm x20cm x 25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) including dismantling existing tiles complete all as specified and directed. Note : The manufacturer's test certificate for tiles must be submitted for approval by the concerned authority.
S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed
M & L preparation of new plastered surfaces of wall and applying two coats of exterior emulsion weater proof paint over a coat of primer complete all as specified and as directed.
Note for item No 98:- (a) The Exterior emulsion paint shall be of 1st quality manufactured by the standard firms of make as specified.
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands and brought to site in sealed containers. The paint so procured shall be of first quality
(e ) Unless otherwise specified the tints of paint shall be as approved by the GE
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
Removing the existing sand from the firing butt and refilling in the same area after seiving the sand with out any fired bullet scrap, pebbles etc, complete all as specified and directed.
Supply and laying River sand (M sand prohibited) filling in firing butt of height average 3.2m including necesaary watering complete all as specified and directed.
Supply only saw dust and mixing with sand in proportion as directed including filling in the firing butt complete all as specified and directed.
M & L for filling (M sand prohibited) in Polyethene bag of 50 Kg capacity with river sand after screening the sand and striching the bag with hand machine and stacked/placed upto 1.5m height complete all as specified and directed.
M&L Hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L 100mm thick, Plain Cement Concrete (1:3:6), type C-2 (using 40 mm graded stone aggregates), as in hardstanding including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, including demolition of existing concrete and removal of debris to outside MD land to a distance exc 1.5 km but not exceeding 5.0 km complete all as specified and as directed. Note :- The concrete shall be laid in alternate bays at a stretch not exceeding 3 metre in length in each bay and width of joint shall not be more than 12 mm.
M & L Preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weather proof paint complete all as specified and as directed.
Note for item No 113:- (a) The Exterior emulsion paint shall be of 1st quality manufactured by the standard firms of make as specified.
(b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works.
(c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE.
(d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands and brought to site in sealed containers. The paint so procured shall be of first quality
(e ) Unless otherwise specified the tints of paint shall be as approved by the GE
(f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.
(g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge.
(h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.
Taking down carefully copper/Alu point wiring (light, fan. socket or power) complete including fixtures and fitings such as switches, ceiling roses, pendents, regulators, sockets , light fitting etc and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separetely) and making good distrubed surfaces of walls, floors etc. complete all as specified and as directed
M & L point wiring complete with 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade,FRLS cable and incl PVC Casing Capping with accessories in wall/roof/ceiling/hangar steel frames etc incl Modular terminal boxes fabricated with 1.6mm MS sheet concealed/fixed surface to walls covered with white plate cover etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for the following :-
One light point/fan/bell point controlled by one switch
All as per item No. 123 here in before but for One 3 pin socket out 5 amp on the same board
All as per item No. 123 here in before but for one switch socket outlet 3 pin 5 Amps on independent board
All as per Sl No 123 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently
S&F modular switch 1 way 6 Amps, 1 module complete all as specified and as directed.
S&F modular switch 1 way 16 Amps, 1 module complete all as specified and as directed.
S&F modular socket outlet multipurpose 2/3 pin 6 amps, 2 module complete all as specified and as directed.
S&F modular socket outlet multipurpose 2/3 pin 6/16 amps, 2 module complete all as specified and as directed.
S&F white cover plate with frame, 3 Module complete all as specified and as directed.
S&F white cover plate with frame, 6 Module complete all as specified and as directed.
S&F white cover plate with frame, 8 Module complete all as specified and as directed.
S&F metal flush box 3 module complete all as specified and as directed.
S&F metal flush box 6 module complete all as specified and as directed.
S&F metal flush box 8 module complete all as specified and as directed.
S&F ceiling rose, surface type Bakelite 65x55mm 3 terminal complete all as specified and as directed
Supply and fixing in repairs LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed
Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making hole in wall complete all as specified and as directed.
M & L Pont wiring complete with 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade,FRLS cable and incl Stove enemelled steel conduit with accessories in wall/roof/ceiling/hangar steel frames etc incl Modular terminal boxes fabricated with 1.6mm MS sheet concealed/fixed surface to walls covered with plastic laminated top cover 2.8mm fixed with cadmium plated iron screws etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for one light point/fan point controlled by one switch
S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed.
S&F Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed..
S&F flame proof exhaust fan 300 mm sweep 230 volts, with all accessories fixed on wall/ceiling complete complete all as specified and as directed. Make of sudhir or equivalent, Bajaj, Philips
M&L XLPE insulated,screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium condutor 1100Volts grade cross sectional area 6 Sqmm 2 core laid on wall / post or in trenches including cable glands and terminal sockets, etc complete all as specified and directed.
Supply, installation, testing & commissioning of maintenance free chemical earthing system comprising 17mm dia copper bonded rod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducing liquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation all as specified and directed. Make : ISG Global or equivalent in SafeTrode / ERICO.
The unit quoted rate shall deem to be included for the following :- (i) Prior to installation of maintenance free chemical earthing, soil resistivity test to be carried out at the location where earthing work to be done in presence of Engr-in- Charge/JE (E/M),user and the report has to submit to Garrison Engineer with recommendation of manufacturer, if required additional interconnection of earthing (not more than 04 number of earthing) to achive earth result less than 1 Ohms. The arrangement done for soil resistivity testing and submission of report with recommendation deemed to be included in the quoted rate.
(ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors.
(iii) Rate of earth energizer compound of 25 Kg of 02 bags and earth resistance reducing liquid 10 litre per cane for each pit deemed to be included in the quoted rate.
(iv) Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor before commencement of work.
(v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH valve should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete.
(vi) Copper strip of size 20 x 3 mm should be fixed on proper post insulator at the instrument end (copper strip will be measured and paid separately).
(vii) Testing of earth shall be carried out in presence of departmental and user representative and report shall be submitted to Garrison Engineer duly signed by all concern.
(viii) Earth resistance tester will be provided by the contractor. Tester should be calibrated from authorised company/ lab.
(ix) Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintened duly signed by all concerned. After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained.
(x) The contractor shall given a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion.
(xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock.
(xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is mainained.
(xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing per each earthing shall be retained from payment due to the contractor for the guarantee period.
(xiv) The electrode shall carry manufacturer's name .
(xv) The connection clamp shall be permanentlly welded to the copper bounded rod to avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination.
(xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm.
(xvii) The contractor shall submit CPRI India certified document for copper bonded rod to ensure genuity of material.
(xviii) Sign board of mild steel 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer showing result of earthing should be fixed near the earth pit after completion as directed by engr -in- charge.
(xix) Earth work such as auguring and making good the surrounding area shall carried out in any type of soil.
M&L Earth pit cover made of heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 9.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mm dia for each electrode pit complete all as specified and directed. Make : ISG Global or equivalent in SafeTrode / ERICO. Note :- The contractor shall submit load bearing capacity certificate from the manufacturer.
Supply and fixing copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc all as directed. Note : All Joints should be joined by Exothermic Welding or Brazing.
S&F epoxy base insulators of suitable size 40mm height for fixing copper earth strip on wall/ceiling/floor/poles etc complete all as specified and directed..
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
M & L for GI tubing 40/50 mm bore light grade 1.2 mtr long bent to shape as required with clamps for fixing of street light on poles/ walls including nuts, bolts, washers clamps of suitable size complete all as specified and directed.
M&L for wiring for circuit complete submain wiring with 2 runs of 1.5 sqmm single core PVC insulated, unsheathed FRLS 100 Volt grade multi stranded copper conductor cable drawn through and incl suitable dia rigid PVC conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl onr run of 1.5 sqmm single core wire PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc complete all as specified and directed. Note:- (a) 2 runs of 1.5 sqmm cable along with one run of 1.5 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length. (b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
Supply, install, testing and commissioning of wall mounted star rated hi-wall split AC units indoor/outdoor of capacity 1.5 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity complete all as specified and as directed. Make :- Blue star, Voltas, Hitachi
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed. Make - V-Guard or equivalent in Microtek/ AE
M&L for Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size PVC Conduit and all accessories fixed to wall/floors along with one run of 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and directed. Note:- (a) 2 runs of 4 sqmm cable along with one run of 4 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length. (b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
S&F single pole and neutral enclosures with a two pin and earth plug and socket complete with one 20 Amp single pole MCB complete all as specified and directed.
M & L for Wiring complete with 4.0 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade, FRLS cable and incl non metalic PVC conduit with accessories in wall/roof/ceiling etc incl PVC/ Metal terminal boxes fabricated with 1.6mm MS sheet concealed/fixed surface to walls covered switch socket combination etc and 4.0 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for controlled by one 15A switch socket independently
All as per Sl No 177 above but Wiring with 1.5 Sqmm copper multistranded unsheathed cable and 1.5 Sqmm copper cable for earth continuity conductor controlled by one 5A switch socket on same board.
S&F Switch socket combination 5A/16A, 5 in 1, flush type complete all as specified and directed.
S&F Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.
S&F MCB SPN 32 Amp , 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified Make/Model :- Legrand Cat Part No 408617 or equivalent. of Schniede, Siemens.
S & F adjustable Gesto TV Model flood light, superior bright, 50 W, IP 66, water proof outer security light for target focusing from butt rest to standing target complete all as specified and directed by Engr-in-Charge
Supply and fix metal frame box connector of size 150x150x150mm duly paited with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S & F triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB completa all as specified and directed
Supply and laying GI pipe 50 mm bore light grade for cable protection complete all as specified and as dierced by Engr-in-Charge. Make : Tata, Jindal, Surya Prakash
Supply and laying GI pipe 25 mm bore light grade for cable protection complete all as specified and as dierced by Engr-in-Charge. Make : Tata, Jindal, Surya Prakash
S&F LED aviation obstruction light with IP 66 protection water clear poly carbonate UV stabilized dome neoprene rubber with bind spike with 302 Nos LED bulbs including necessary electric connections including 2.5 sqmm, 2 core, PVC copper cables fixed on wall with 20mm dia PVC conduit from DB to light fitting fixed in and including GI pipe 25mm dia 1 mtr long grouted with PCC complete/ binding with existing angle frame etc complete all as directed at site. Make : Bajaj Cat No - 110731 or equivalent in Wipro/ CG.
S&F DOL starter suitable for upto 2 HP, single phase 240V, 10-40 Amps pumping set complete all as specified and directed. Make : L&T, C&S, BCH
S&F XLPE insulated, screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium condutor 1100Volts grade cross sectional area 10 Sqmm 2 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, etc all as specified and directed. Note : Excavation and earth work, riddling sand, and cable protection cover shall be measured and paid seperately. Make : KEI/ Havells/ Polycab
M&L Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors 1100 Volt, conforming to IS 694, 1.5 sq mm nominal area complete complete all as specified and directed. Make : Havells/ Polycab/ Finolex
S&F MCCB, 4 Pole, 100 Amps, Thermal Magnetic Release adjustable type, 415 Volt, 25 KA including connecting up using suitable size of copper lugs complete all as specified and as directed. Make : L&T, Legrand, Siemens
Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m deep in hard/dense soil and getting out for laying of XLPE cables complete all as per specified and as directed.
Returning, refilling including spreading levelling watering and well ramming in layers not exceeding 25cms thick in hard/dense soil complete all as per specified and as directed.
Removing excavated materials not exceeding 50m distance and depositing where directed at level not exceeding 1.5 m above the starting point complete all as per specified and as directed.
Riddling Sand obtained from excavation for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming complete all as per specified and as directed. Note :- In case sufficient sand not obtained from excavation, the required additional qty obtain from out side MD land as directed by the Engineer-in-Charge. The rate is deemed to be included.
S&F Fly ash bricks using modular bricks as in cable protection cover complete all as per specified and as directed.
p.chinnasamy
D.R ASSOCIATES
KSR AND COMPANY
G Perumal and co
M/s Shana Constructions
K S MUTHU CONSTRUCTTIONS
S.RAMACHANDRAN
SEMBA ELECTRICALS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .