864/WS-48/2021-22

Amount

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290 Gde-E-165 complete all as specified and directed.

M&L for PCC (1:2:4), type B-1 (using 20 mm graded crushed stone aggregates) as in anchoring hold fast, parapet, coping, apex plates, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. orf or shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for plain cement concrete (1:4:8), type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastred surface of wall and applying two coats of Cement base paint over a coat of alkali-resistant priming paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.

S&F plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 6 but nexc 13 Sqcm complete all as specified and directed.

M&L for Australian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) complete all as specified and directed.

S&F Aluminium frame work for itched tuffon glass door of 12 mm thick conforming to design itching on glass as directed, including all fitting and fixtures such as aluminium beading, rubber gaskect, large size decorative handle, with locking arrangement incuding two floor spring double action type pivots system as required at site complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. orf or shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B1 using (20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B1 using (20mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B1 using (20mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B1 using (20mm graded crushed stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for 10mm dia and over TMT bars, cut to length bent to shape required incl cranking bending spirally for hoping for cols, hooking and and binding with and incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Ditto all as per item No. 22.00 described here-in-before but 5mm dia & over upto & incl 10mm dia in stirrups, spacer and binder

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter for flat rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) for flat rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for flat rough finished concrete surfaces complete all as specified and directed.

M&L for 100 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregates) as in floors complete all as specified and directed.

M&L for 100 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

S&F roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe 410W Gde-E-250 quality A) complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (Fe 410W Gde-E-250 quality A) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan built in CM 1:6 complete all as specified and directed.

M&L for suspended false ceiling system using E grid suspended ceiling grid system, Grid size 600mm x 600mm with and including GI frame work of main runners 38mm x 24mm , cross Tee 28mm x 24mm and wall angle 24mm x 24mm hot diped galvanized steel with zinc coating not less than 120gm /sqm using 9mm thick high pressure stream cured fibre cement pre primered textured variant E board classic, ISI Marked IS- 14862-2000 to be placed in grid of E grid suspended ceiling grid system duly suspended by 8mm dia GI bar hangers from existing purlins to roof with butterfly clips complete all as specified and directed.

M&L for point wiring complete with PVC insulated and unsheathed, Flame Retardant Low Smoke (FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC (surface/concealed as per direction of Engr-in-Charge) conduit not less than 20 mm dia, clip, with suitable for metal flush/ PVC flush boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3mm thick plastick laminated sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following :-

One light point controlled by one, one way switch.

One 3/5 pin 5 Amp socket outlet point controlled by one, one way switch on independent board.

Ditto all as per item No 35 described here-in-before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, Flame Retardant Low Smoke (FRLS) cable for 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S&F switch piano, flush type, 5A, single pole complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed.

S&F switch piano, flush type, 15A, single pole complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5A and 15A, flush type complete all as specified and directed.

S&F ceiling rose surface backelite 65mm x 50mm ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F LED lights fitting fixture 20W, 6500K, 2000LM decorative ultra slim with co extrded channel box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F Sheet metal enclosure double door for mounting MCBs with 200 A rated bus bar 4 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the distrubed wall surface all as required at site complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

S&F MCB SP 40 amp, 240 V, 50 Hz AC made from moulded self-extinuishing thermostat plastic and suitable for C curve, 10 KA breaking capacity complete all as specified and directed.

M&L for 10 Sqmm 1100 volts grade heavy duty PVC insulated multistranded aluminium conductor and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart incl 4mm suspension GI wire one twin core cable flate porcelain insulators etc complete all as specified and directed.

S&F lamp holder insulated body PVC/ polycarbonate with back plate suitable for batten fitting complete all as specified and directed.

S&F 10 watt 6000K LED bulk head luminaries with opal diffuser, etc complete with accessories all as specifed and directed. Make - Havells Cat Pärt No- LHEOAP7UZ6W010 or equivalent in Wipro/ Phillips

S&F LED 10W (candle / ball type) with B22 base complete all as specified and directed Make Havells/ Wipro/ Phillips/ Syska

M/S KABIR CHOUDHARY

M/S ATTAR BUILDERS

M/S Tajamul Ah Buchh