COMPREHENSIVE MAINTENANCE OF CIVIL AND ELECTRICAL PART OF BLDGS INCLUDING PERIODICAL SERVICES, REPAIR TO JOINARY, WINDOW, FLOORE TILES, ROOF TREETMENT CONNECTED MISC B/R ITEMS, UNSERVICABLE POINT WIRING, LIGHT FITTING/ FIXTURES, DBS, UNSERVICABLE EAR

Amount

Demolition of brick work built in cement mortar including all quoins, pillars etc, complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of walls, finished the surface fair and even without using extra cement complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar (1:4), on brick or concrete wall surface, mixed with water proofing compound @ 2% by weight of cement, finished fair & even without using extra cement complete all as specified and as directed.

M & L 10 mm thick rendering in cement mortar (1:3) on ceiling surface, finished even & smooth without using extra cement complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4, Type B1, using 20 mm graded stone aggregate, below tiles for levelling of existing surface complete all as specified and as directed.

M&L 7 to 8 mm thick, Non-skid coloured Ceramic tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.16 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles, laid over & including 15mm thick screed bed or bedding layer of cement mortar 1:6 as in flooring complete all as specified and as directed.

S&F coloured Vitrified Ceramic tiles (Dark shade/Double charged/Ultra charged )10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile complete.

M&L glazed coloured ceramic tiles, 350 x 250 x 7 mm/450x350x7mm thick, in vertical surfaces such as skirting/dado etc, set and jointed in cement slurry, laid over & including 10mm thick rendering in cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tile complete all as specified and as directed.

Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm each including builder hardware fitting complete all as specified and as directed.

All as per item No 12.00 here in Before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description area exc 1.00 Sqm but not exc 2.00 Sqm each leaf including builder hardware fitting complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section using FE-290 (Gde-E-165) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 including taking down old guard bars complete all as specified and directed.

S&F 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 35mm 2nd class hard wood skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24.

S&F solid PVC moulded door frame of size 50x47mm, made out of 5mm thick one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed.

S&F Factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F powder coated aluminium of various section as required for frame of windown/ventilators etc with one or more rebates including jointing cleats for fixing etc. & fixed with cadmium plated screw not less then 300 mm C to C & cealing the joints between frames & granite/kota stone with polysulphide sealant as per the manufactures instructionall as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2Nos.) suitable handle (1 No) complete all as specified.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete all as specified.

S & F powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 12mm thick pre-laminated sheet fixed in half bottom portion complete all as specfied and directed.

S&F brass mortice lock 100mm 6 lever vertical type with duplicate key and handle set complete all as specified.

S&F Door closer, aluminium body hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete.

S&F 100mm size, mild steel butt hinges, cold rolled, medium weight, fixed with Stainless steel screws complete all as specified and as directed.

S&F 100mm size, stainless steel butt hinges, fixed with Stainless steel screws complete all as specified and as directed.

S&F hydraulic door hinges, fancy type, stainless steel, fixed to cup board and similar items complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

S&F 200 mm long Stainless steel handles, Fancy type and fixed complete all as specified and as directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel screws complete all as specified and as directed.

S&F in repair 19 mm thick PVC board, grade-2, interior grade, commercial type, fixed with screws to timber framed work including taking down old boarding, as in shelves, shutters, etc complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Cement concrete 1:4:8, Type D-2, using 40mm graded stone aggregate, as in foundation, filling and mass concrete complete all as specified and as directed.

Supply and laying dry river sand for cushioning to interlocking paver block including punning down of sand complete all as specified and as directed. Note: for measurement purpose punned thickness of sand only shall be considered.

M&L for 80 mm thick, Machine pressed precast concrete interlocking rubber moulded paver block any shape, colour and size confirming to IS 15658-2006, M-40 Grade, with grey cement and pigment complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc.complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete using FE-290 (Gde-E-165) complete all as specified and directed.

S&F mild steel rolled sections, Framed work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, using FE-290 (Gde-E-165) complete all as specified and directed.

S&F in repair, in position Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of approved colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified, high tensile alloy steel trap sheet having 55 MPA yield strength and zinc (galvanized ) + Aluminium combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes, RMR 1040 profile width 1125 mm complete all as specified & as directed.

All as per item No 43.00 here in before but plain sheet as in ridge/valley/gutter complete all as specified & as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work etc complete all as specified and as directed.

S&F Solid PVC Wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame acomplete all as specified and directed.

S&F Gl powder coated frame work, grid size 605x605mm, for seamless ceiling, comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed.

S&F G.I. Hangers, 6 mm dia, (up to 1200mm length) adjusting level, fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size, 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F 4.00 mm thick Non asbestos fibre cement building boards (E board) designer Pattern fixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as specified and as directed.

Taking down steel tubing including connection 15 mm bore fixed in any position.

All as item No 51 above but 20mm bore

Fixing only 15 mm dia Old steel tubing and connections any grade in new or old positions viz walls ceiling, floors etc. (Pipes obtained under taking down shall be refixed after cleaning).

All as per item No 53 above but 20mm bore

S&F 20 mm outer dia bore CPVC pipe SDR -13.5 including all fittings and fixed complete to walls/ceilings or laid in trenches.

S&F 20 mm bore GI Tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete.

S&F 20 mm bore Brass Elbow for fixing of CPVC pipe

S&F Brass Elbow (3/4 X ½) mm for fixing of CPVC pipe

S&F 20 mm Brass Tee for fixing of CPVC pipe

S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of CPVC pipe

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing etc. capacity of tank exc 500 ltr but not exc 1000 ltr.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing etc. capacity of tank exc 1000 & n.exc 2000 Ltr capacity.

M & L in repair 20mm thick Granite slab (of any type) work (table rubbed and polished), in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite stone slab, over and including 20mm thick screed in cement mortar 1:6 including demolition of old stone slab complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel screws complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of alkali resistant primer, over and including 3 mm thick cement based wall care putty complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved (Colour scheme shall be as approved by the GE & user) over and including a coat of priming paint, over and including 3 mm thick cement based wall care putty complete all as specified and as directed.

M&L preparation of new plastered ceiling and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of pink primer complete all as specified and as directed..

M&L for preparation of new or previously untreated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide primer complete all as specified and as directed.

S&F of 4 mm thick Aluminium Composite panel cladding of approved quality and colour as approved by GE,fixing in MS frame at any height and including MS frame of size not exc 0.36 sqm (used in rect angular tubes of size 50.8mmx 25.4mm x 2.9mm thick or square tubes 38mm x38mm x 2.9 mm thick are used in frame) and filling the joints with all weather silicon sealant including all mouldings, cuttings, etc complete all as specified and directed (Make- ACP Aluedecor, Alstrong, Wonder Alu Board over seas, VIVA and Eurobond

Taking down/removing existing roof treatment over roof slab including roughening and wire brushing the surface to remove the loose concrete, dust and cleaning the surface complete all as specified and as directed.

M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight not less than 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps etc as per manufacturers instruction.(Make:- SNL ltd ,STP Ltd or Choksy chemical pvt ltd) (c) M&L for finishing of top surface by applying two coats of aluminium paint complete all as specified and directed.

Cutting grooves 75 mm wide & 65 mm deep in brick wall/ RCC surfaces at any location shaping horizntal face with mechanical cutter and grooves filled with PCC 1:2:4 type B-0 (using 12.5 mm gradded stone aggregate) mixed with chemical compound SUPER LATEX OR DR FIXIT OF PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD mixed with proportion 200 ml per 50 kgs cement as per manufactures instruction all as specified & directed.

M&L 25 mm thick machine cut Kota stone flooring, laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finished, jointed and pointed with grey cement slurry mixed with pigments to match with the shade of Kota stone including rubbing and mirror polishing complete all as specified and as directed.

All as per item No 74.00 here in before but as in Riser of steps, skirting/dado and pillar, laid over and including 10 mm thick rendering in cement mortar 1:4 including demolition of old skirting/dado etc complete all as specified and as directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying one coat of wall care putty then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying one coats of OBD of any colour washing down with water complete all as directed.

M&L for preparation of old decorated, wall, chequered floor, roof (corrugal) surface, by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved (to match with the Existing surface) complete all as specified and as directed. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials outside MOD land (As approved by local Municipal Authorities) by manual/mechanical means including loading, transporting and unloading the same complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed.

M&L point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including concealed, rigid non-metallic PVC Conduit of minimum 25mm dia or as per site requirement with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for One light/fan/bell point controlled by one No, 5 Amp, one way switch/bell push complete all as specified and as directed.

All as per item No. 80.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed.

All as per item No. 80.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed.

All as per item No. 80.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed.

All as per item No. 80.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 1 or 2 module complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 3 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 4 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 6 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 8 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 12 modules complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 16 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 1 or 2 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 3 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 4 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 6 modules complete all as specified and as directed.

S&F in replacement modular metal flush box, 8 modules complete all as specified and as directed.

S&F in replacement module metal flush box, 12 modules complete all as specified and as directed.

S&F in replacement module metal flush box, 16 modules complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete all as specified and as directed.

S&F in replacement modular Fan step regulator, 120W - 1 module complete all as specified and as directed.

S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.

S&F in replacement sub main wiring with 2 runs of 4 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 20 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 4 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in replacement sub main wiring with 2 runs of 6 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in repair load line, distribution board, double door type, TPN, vertical, 4 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. Make : Legrand Model: 5077 45 or equivalent model of Make mentioned in PS.

S&F in repair load line, distribution board, double door type, TPN, vertical, 8 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. Make : Legrand Model: 5077 47 or equivalent model of Make mentioned in PS.

S & F in repair for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in repair for distribution board double door type, SPN, 4way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in repair for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

Supply, fixing and connecting in replacement recessed Type, Full window, opal Diffuser, Ultra modern, slim LED Panel 2x2, 36W, size 595X595mm (Nominal), suitable for Existing false ceiling, with CRCA powder coated White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 3KV, safety & performance test as per IS:15885 Part 2/Sec, Total system Lumen not less than 4200, in Cool day Light (5700K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours, complete with all accessories as required complete all as specified and as directed. Make : Make - Havells Cat Part No. - PLANO2X2PLR36WLED857S /Polycab/CG

Supply, fixing and connecting in replacement of Surface/Wall Mounted 10W integrated LED 2 feet Fitting with Epoxy powder coated white polycarbonate channel housing. Total system Lumen of 10W Led should be 800 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 20, Complete with all accessories as required with connections.Make - Havells cat part No -LUMILINEBS10WLED865SPCWH/ Wipro/Philips.

Supply, fixing and connecting in replacement of Surface/Wall Mounted integrated LED 4 feet Fitting of not more than 20w with polycorbonate housing & opal diffuser finish , Integral electronic driver with Output short circuit protection, Surge Voltage Protection of min 3 KV and Safety test as per IS15885 Part 2/ Sec 13. Total system Lumen not less than 2000 or above in Cool day Light(6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy100 Lm/w, THD(%) < 20, LED with Average life of 50000 Burning hours. Complete with all accessories as required with connections. .Make - Havells cat part No -LUMILINEBS20WLED865SPCWH/Wipro/Philips.

M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mm bore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.

S&F in repair Rigid, non-metallic, PVC conduit, medium grade, 20mm bore, including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.

All as per item No 116.00 here in before but 25 mm bore complete all as specified and as directed.

S&F in repair modular blanking plate, 1 Module complete all as specified and as directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and directed.

S & F in repair MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed.

S & F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed.

S & F in repair MCB DP, 240 Volts, 63 Amps complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 32Amps complete all as specified and directed.

Supply and fix in repair for PVC T-COVER complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 63 Amps complete all as specified and directed.

M/S GEETANJALI ENTERPRISES

AJ. Owners

Ex Serviceman Enterprises

R R Associates

Vishal Traders