ADDN ALTN OF INTERNAL SECURITY OFFICE BLDG NO P 86 OF 222 ABOD PROVN OF OVERHEAD COVERED SHELTER AT TECHNICAL AREA MAIN GATEOF 222 ABOD PROVN OF GUARD ROOM AT TALTALA GUARD POST OF 222 ABOD PROVN OF ROOF REPLACEMENT AT BLDG NO T 1 BLOCK AT JORABAT ME

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable , etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified & as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soil n exc 50 mtr distance and depositing at level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and directed.

Material and labour for PCC 1:2:4 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 ( using 20mm gradrd stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 ( using 20mm gradrd stone aggregate) in Column filling complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type B1 ( using 20mm gradrd stone aggregate) in beam,cantilevers, lintels complete all as specified and directed.

Material and labour for RCC 1:1.5:3 type A1(20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed.

Material and labour for PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in back filling in pressed steel door and window frame/hold fast complete all as specified and as directed.

Material and labour for Precast RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in manhole cover slabs, of any thickness, size or shape including necessary form work, finished concrete surfaces even & fair in cement mortar complete all as specified and directed.

Material and labour for 100 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone agg). as in sub base of floor and laying 150 micron thick polythene film all as specified and as directed.

Material and labour for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound etc complete all as specified and as direted.

Use and waste formwork to sides of concrete foundations, footing, bases of columns, plinth beams for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and as directed.

Use and waste formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings , floors, roofs, landings, balconies etc., n exc 200 mm thick (horizontal or sloping) for fair finished surface of concrete complete all as specified and as directed.

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and as directed.

Material and labour for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 all as specified and directed.

Material and labour for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

Material and labour for glazed ceramic tiles of size 450 mm x 350 mm x 7 mm thick, coloured/printed, on vertical surfaces, set, jointed in net cement slurry and pointed in white cement mixed with colour pigments to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed

Material and labour for mild steel TMT bars 5 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces on wall finished even & smooth without using extra cement complete all as specified and as directed

Material and labour for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound 200ml/50kg of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound to be measured and paid separately as "Supply only

Supply only approved integral water proofing compound.

Material and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Material and labour for complete removal of existing finishes/treatment of wall and applying two coat of acrylic distemper over one coat of primer including 1 mm thick(average) wall care putty complete all as specified and as directed.

Material and labour preparation newly plastered surface and applying two coat of acrylic distemper over a coat of 1mm thick wall care putty and a coat of primer on walls all as specified and directed.

Material and labour for preparation of new wall surface and applying two coats of acrylic exterior weather resistant paint (weather proof paint) of tint as approved over a coat of primer and including applying wall care putty of 1mm thick average thickness complete all as specified and as directed.

Material and labour Complete removal of existing wall surface and applying two coats of acrylic exterior weather resistant paint (weather proof paint) of tint as approved over a coat of primer and including applying wall care putty of 1mm thick average thickness complete all as specified and as directed.

Supply and fix in repairs 25 mm dia stainless steel tublar curtain rods including fancy type with fixing brackets, stops, rollers etc. with bracket complete all as specified and as directed.

Material and labour for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.

Taking down chowkats with shutters including builders hardware(without taking off shutters from the frame) area n.exc. 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames area exceeding 1.5 Sqm but not exceeding 4 Sqm each including shutter with builders hardware (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description, area not exceeding 1 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as specified and as directed.

Material and labour for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors with double rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

Material and labour for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

Supply and fix 30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and as directed.

Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

Supply and fix 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and as directed.

Dismantling timber scantling 40Sqcm and over in section framed work in any position complete all as specified and as directed.

Material and labour for 2nd class hard wood, in scantlings, clean sawn timber as in framed work complete all as specified and as directed.

Supply and fix anodized aluminium push pull type glazed door shutter single leaf including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, 5 mm thick float glass tinted quality on both panels complete all as specified and as directed. (Refer Jindal Cat M-2016) Aluminium sections : 'A' series (i) Shutter top, bottom & middle rails :- 85.00 mm x 44.45 mm x 1.20 mm thick (19600) (ii) Shutter vertical rail : 47.62 mm x 44.45 mm x 1.20 mm thick ( (iii) Frame top and sides :- 63.50 mm x 38.10 mm x 1.2 mm thick (20027)

Supply and fix three track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete like 5.00 mm thick glass panes, rubber beading, etc. complete all as specified and as directed. (Refer Jindal Cat M-2014 ) Aluminium sections : 'A' series (i) Shutter bottom & top :- 37.50 x 15 x 1.1 mm thick (20690) (ii) Shutter interlock :- 37.50 x 23 x 1.1 mm thick (20689) (iii) Shutter side (Handle) :- 37.50 x 23 x 1.1 mm thick (20689) (iv) Frame bottom :- 92 x 26 x 1 mm thick (20671) (v) Frame top and sides :- 92 x 26 x 1 mm thick (20672)

Supply and fix steel windows and ventilator fixed type complete with glazing bars dovetailed of welded ready for wire mesh/glass pan fixing complete all as specified.

Supply and fix factory made solid PVC door frame of size 40mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS Tube for top & bottom rails MS Frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm thick width struck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheet beading & joined together with solvent cement supplied & fixed in the frame at site as per specifications and drawing complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

Supply and fix 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

Supply and fix 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

Supply and fix 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

Supply and fix 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

Supply and fix 100mm size butt hinges, stainless steel complete all as specified and directed.

Supply and fix mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and as directed.

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

Supply and fix aluminium door closer (Diecast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed.

Supply and fix stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 4mm thick, frosted sheet glass ordinary quality and glazing, with oil putty in Squares n.exc 0.5 Sqm each complete all as specified.

Supply and fix rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and complete all as specified and as directed.

Material and labour 40mm thick damp proof course 1:2:4 type B-0 and applying evenly a tack coat of blown bitumen 85/25 @ 1.2kg per sqm.blinding with clean dry sand @ 0.05 cumsqm and laying 150 micron thick polythene film all as specified and directed

Supply and fix stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

Supply and fix vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.

Supply and fix 32 mm dia PVC waste pipe complete all as specified and as directed.

Supply and fix sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

Supply and fix GI tubing 15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix 10 Litres capacity, PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including bracket swith 32mm dia PVC pipe 600 mm long etc complete all as specified and as directed

Supply and fix PVC connection 450mm long and15 mm dia with brass fly nut at both ends complete all as specified and as directed

Supply and fix 15mm bore, bib taps, fancy type cast copper alloy chromium plated screwed down for iron pipe for brass ferrule and fixed complete all as specified and as directed

Supply and fix vitreous china wash basin white flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed.

Supply and fix 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix Grating doom 100mm dia of stainless steel ( Minimum weight 25gm ) complete all as specified and directed

Supply and fix chromium plated swivel shower rose of size 150x150mm square type with accessories complete all as specified and as directed.

Material and labour 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Supply and fix PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in tranches or in floors including haunching complete all as specified and as directed.

Supply and fix PVC (SWR) 110mm bore bend, any radius complete all as specified and as directed.

Supply and fix 75 mm PVC bore soil waste and vent pipe in any length with or without ears fixed to wall complete all as specified and directed.

Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete bore of pipe 110mm all as specified and as directed.

Cutting into existing manhole for connecting new drain pipe (150mm dia),making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc. all as specified and as directed

Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, eave board fixed with self tapping screw as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material and labour for rolled mild steel as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) conforming to Fe-410-W(Gde-E-250) completed all as specified and as directed.

Material and labour for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.

Supply and fix Rolled mld steel roof trusses ( framed) trussed purlins, crane gantries, rails and fastenings and heavy brackets framing ( Beam, tee, angle, channel or flat section) including distace pieces, cleats etc confirming to Fe 410-W ( Gde E-250 Quality A) complete all as specified & as directed.

Supply and fix for rolled M S Plate pain or chequred 5 mm thick or over in thickness of Fe-410-0 quality B W-E-250 all as specified and as directed

Supply and fix for mild steel rag or lowers bolts 12mm neck diameter screwed one ends with hexagonal or square nuts and washers the other end enlarged and jagged or loused n,exc 15cm long all as specified and as directed

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long and diameter of shank 5 to 10mm completed all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc, including cleaning and refixing or removal to store (meaasured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Material and labour for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.

Material and labour for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

Material and labour for applying two coats of black bituminus paints incl preparation of any description wood, steel, iron, concrete, brick, stone, etc, exceeding 10cm in width or girth surfaces of any description, not otherwise described complete all as specified & as directed.

Material and labour for preparation of new or previsously untreated steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide completed all as specified and directed.

Supply and fix suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of GI Snap grid size 600mmx600 mm with main runner 34 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 3mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and directed

Material and labour in repairs, for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 34 mm x 24 mm and wall angle 32mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in a grid of GI system duly suspended with 3mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLSH cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) laid/fixed in and including concealed in PVC rigid conduit on walls/ceiling, and also including sunk type pressed steel terminal box made out of galvanised iron sheet thickness not less than 1mm and 3 mm thick plastic laminated sheet top covers for One light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed.

All as per item serial No 114 here-in-before but for One 3 pin 5 Amp switch socket outlet on same board with other switch.

All as per item serial No 114 here-in-before but for One3 pin 5 Amp switch socket outlet on independent board.

All same as per item No 114 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

Supply and fix switch piano, flush type single pole one way 5 Amps 240 volt complete all as directed.

Supply and fix in repair switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed.

Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps, flush type complete all as specified and as directed.

Supply and fix in repairs, socket outlet 3 pin, 2-in-1, 5 Amps, flush type complete all as specified and as directed.

Supply and fix switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed.

Supply and fix switch socket combination, multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed.

Supply and fix in repairs, switch socket combination, multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed.

Supply and fix stepped type electronic fan regulator, two module size, flush type complete all as specified and as directed.

Supply and fix in repairs, stepped type electronic fan regulator, two module size, flush type complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65x50mm three terminal complete all as specified and as directed.

Supply and fix in repairs ceiling rose surface bakelite, 65x50mm three terminal complete all as specified and as directed.

Supply and fix lamp holder, insulated, PVC / polycarbonate /bakelite body complete all as specified and as directed.

Supply and fix Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix in repairs LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fix in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing building security light bracket made of GI pipe 40 mm bore medium grade (bend to shape), 2.00 metre long and fixed with Ms flat iron clamp(clamp shall be 40 x 5mm), nuts, bolts and washers on pole complete all as specified and directed.

Material and labour for Sub main wiring with 4runs of 6.0 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit conforming to IS-9537 with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith two run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring including conduit any type and size complete all as specified and as directed. Note : six runs of cable and one run of PVC conduit will be measured as one Rm unit.

Material and labour for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrode at one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm bore GI pipe medium grade with all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-I complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louversCopper winding with 1400 rpm complete all as specified and directed.

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix in repair MCB DB, double door sheet metal enclosure IP -43 , SPN 8 way with 200 A rated bus bar complete and grouted in wall with PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed.

Supply and fix MCB DB, double door sheet metal enclosure IP -43 , SPN 8 way with 200 A rated bus bar complete and grouted in wall with PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed.

Supply and fix in repair MCB DB, double door sheet metal enclosure IP -43 , SPN 8 way with 200 A rated bus bar complete and grouted in wall with PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed.

Supply and fix in replacement MCB DB, double door sheet metal IP 43 enclosure TPN 4 way with 200 A rated bus bar with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

Supply and fix in repair MCB TPN 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and directed.

Supply and fix in repair MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA, C-series marked fixing in DBs (DBs catered separately in this Schedule)

Supply and fix MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA, C-series marked fixing in DBs (DBs catered separately in this Schedule)

Supply and fix MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series complete all as specified and directed.

Supply and fix in repairs MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series complete all as specified and directed.

Supply and lay GI tubing 25mm bore light grade for cable protection and fixing to the existing pole with flat iron clamp 25x 3mm including nut bolts complete all as specified and as directed.

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

Material and labour for Sub class ‘B’ old size well burnt brick laid flat in trenches over the cable for protection of LT cable complete all as specified and as directed.

KAKWANI BUILDERS (BID ID -3168274)

M/s Talukdar Construction (BID ID -3169367)

M/S P&R CONSTRUCTIONS (BID ID -3169132)