Renovation (Civil and Electrical) of Lab. No. 7 of TFAN dept. for Jigyasa activities at SRP Block, CSIR - CFTRI, Mysuru

Amount

PART: A - CIVIL WORKS

Removing laboratory sink of any size including stacking of useful materials within 50 metres lead or to the auction yard of CFTRI as directed by Engineer-in-charge.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Island Table (2400x1500x900mm) with worktop in 18+/- 1mm thick black granite construction; storage module with one drawer., one shutter - 2 Nos, leg space with footrest - 4 Nos., 2+2 6/16 Amps 3 pin socket cum switches Material of Construction: 20 guage electro galvanised sheet with epoxy polyester powder coating

Emergency Eye/ Face Wash and shower (Combination unit) PIPE: ISI Marked GI pipe and Fittings with Powder Coating/ Spray Paint for anti corrosion. VALVE: ½” Self closing brass ball valve with stainless steel/ Brass ball and spindle operated with yellow ABS push plate. 1" Cast iron ball valves with SS ball and spindle., operated by yellow colored pull rod. RECEPTOR BOWL: High visibility yellow extra-large cycloc receptor bowl reistant to damage from alkali, salf solution, oil and most acids. SHOWER HEAD: Extra large cycloc drench shower head with perforated spreader ensures complete drenching of victim in seconds. AUTOMISER HEADS: Twin soft flow automiser head which has aerators to control the stream straightness and diameter, thus reducing splash by aerating the stream. It also controls to save water and reduce energy costs. The twin flow has flip/flop dust cover which protects from dust and opens with water pressure. STEAM CONTROL: For Eye Wash-Steady water flow under varying pressures assured with automatic pressure compensators for 30-90 PSI. SUPPLY:1½” BSP Recommended Pressure: 30 PSI/2Kg/CM2

Providing and fixing Vertical blinds made up of machine woven jute fabric of width 100 mm and required length fixed to extruded aluminium track section of size 45x25mm Make: ad blinds (Window Fashion)

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm Make: Parryware/ Hindware/ CERA

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes Make : Ashirwad/Finolex

Making chases up to 7.5x7.5 cm in walls/ floors including making good and finishing with matching surface after housing G.I. pipe etc.

Providing and laying Vitrified tiles in floor in different sizes (Minimum thickness of 10 mm) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 M sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA/NITCO

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA/NITCO

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer Make: Asian or Nerolac or Dulux

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Make: Asian or Nerolac or Dulux

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work Recommended Brands [asian - apcolite gloss enamel OR Nerolac – synthetic enamel OR Dulux - Gloss enamel]

PART: B - ELECTRICAL WORKS

Dismantling & taking down wiring with switch boxes, old Electrical panel etc. as directed by Engineer in charge and depositing old materials in E & MM Store yard.

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Anchor-ROMA a) Group B

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model:Anchor-ROMA a) Group C

Supply, Installation, testing and commissioning of 300 mm sweep, industrial type, Exhaust fan with with 1.5 / 2.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.ready to use. Make : USHA / CROMPTON / ALMONARD / HAVELLS / BAJAJ / KHAITHAN

Supplying and fixing of 25 mm size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. PVC Conduit make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's.

Supplying and drawing 5 Runs x 4.0 Sq.mm. FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required Wire Make: Havels / Finolex / Standard / V-Guard/ POLYCAB

Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Four Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: L&T/ABB/INDO ASIAN/CRAB TREE

Supplying and fixing 5A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: L&T/ABB/INDO ASIAN/CRAB TREE

Supplying and fixing 8 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: L&T/ABB/INDO ASIAN/CRAB TREE

Supply and fixing of 10” x 12” Teakwood Switch Board covered with 3 mm thick white hylem sheet and consisting of the following pre-wired, wiring with 4.0 / 2.5 sq. mm. copper wire, connectiing with existing wiring etc. for ready to use a) 5/6A, Flush type, white colour One way Switch. Make : LISHA. - 2 Nos. b) 5/6A, Flush type, white colour, 3/5pin socket. Make : LISHA. - 2 Nos. c) 15/16A, Flush type, white colour, one way Switch. Make : LISHA. - 2 Nos. d) 15/16A, Flush type, white colour, 3/5pin socket. Make : LISHA. - 2 Nos. e) Flush type, white & Red colour indicator. Make : LISHA. - 1 No. f) 2 Pole, 16A, MCB. Make : ABB / HAVELLS/LEGRAND. - 1 No.

Supplying and fixing of modular, 6A, switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required .Make:Anchor-ROMA

Supplying and fixing of modular, 6A, 3pin socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Make:Anchor-ROMA

Supplying and fixing following size/ modules, PVC box along with modular base & cover plate for modular switches in recess etc. as required. 4 Module. Make:Anchor-ROMA

K S RAVEESH KUMAR