PRVNMEDICALGASPIPELINE SYSWITHALLIED WKSFOR OPERATION THATRE, ACCIDENTEMRGNCY CENTRE N CNNCTING PIPELINE NEWOXYGEN GENRATNPLANT PRVN 01 LIGHTENING ARRESTOR N ALLIED WKS AT BLDG NO T86 PRVN WINDOW SAFETYGRILLS QTR225 VARIOUS WARDDEPT NMKUM GERANCHI

Amount

Oxygen Manifold :- Supply, installation, testing and commissioning of Oxygen manifold system of 5+5 size comprising of high pressure copper pole and with high pressure copper fittings , NRV made of high quality material and with tail pipes connect cylinders with manifold NRV made of Teflon tube breaded with stainless steel wire and covered by S.S. Spring complete all as specified & directed (Notes : The system will have non-return valves for easy change of cylinder without loss of continuity of gas supply)

Fully Automatic Control panel :- Supply, installation, testing and commissioning of fully automatic control panel CE marked digital display type to indicate just before manifold switches from bank in use to reserve with out fluctuation in delivery line pressure. The panel shall be fitted with standby regulators besides line regulators and the control panel with three coloured LEDs eleven indicator four for the left bank and four for right bank and three for the mainline duty bank complete all as specified & directed (Note : Panel shall confirm to NFPA-99 or HTM-2022 BS EN 737 C-11 safety standards/ISO certification)

Copper pipe line for oxygen and vacuum:- Supply, installation, testing and commissioning of copper pipe solid drawn, seamless, deoxidized, non arsenical, half hard, temered and degrees manufactured as per BS 2871Pt. I table-X of 1971 chemical comosition as per BS 6017 of 1981 table 2, Gu-DHP complete complete all as specified & directed of following sizes :-

12 mm outer dia x 0.7 mm thick

15 mm outer dia x 0.9 mm thick

22mm outer dia x 0.9 mm thick

28 mm outer dia x 0.9 mm thick

42 mm outer dia x 0.9 mm thick

Supply, installation, testing and commissioning of oxygen outlet (Din type) with probre indigenous for oxygen supply with double stage regulator complete all as specified & directed

Supply, installation, testing and commissioning of Vacuum outlet (Din type) with probre indigenous for Vacuum supply with double stage regulator complete all as specified & directed

Supply, installation, testing and commissioning of Medical air outlet (Din type) with indigenous probre for medical air supply with double stage regulator complete all as specified & directed

Supply, installation, testing and commissioning of area valve service unit (AVSU) for oxygen gas complete all as specified & directed

Supply, installation, testing and commissioning of area valve service unit (AVSU) for 2 Gas i.e air and Vacuum complete all as specified & directed

Supply, installation, testing and commissioning of shut off valves of 12 mm complete all as specified & directed

Supply, installation, testing and commissioning of shut off valves of 15 mm complete all as specified & directed

Supply, installation, testing and commissioning of shut off valves of 22 mm complete all as specified & directed

Supply, installation, testing and commissioning of shut off valves of 28 mm complete all as specified & directed

Supply, installation, testing and commissioning of suction machine IR make model V-255 with 5 HP 3 phase electrical motor V-belt drive complete with suction regulating gauge with bactieria filter,NRV and pressure regulator valve etc. complete all as specified and directed

Supply, installation, testing and commissioning of vacuum reciever tank of capacity 500 ltrs made of 6 mm MS plate with supporting ring inside the tank and tested at a pressure of 15 Kg Cm2 complete with piping work complete all as specified and directed

Supply, installation, testing and commissioning of ward vacuum unit with 1000 ml polycarbonate collection Jar with stainless steel clamps ,auto clavable with anti overflow safty device and equipped with a plastic anti bactirial filter complete all as specified and directed

Supply, installation, testing and commissioning of madical gas hose assemebley as per standard and Vacuum) complete all as specified and directed

Bed head Panel :- Supply, installation, testing and commissioning of bed head panel for ICU 4 ft size for 2 gas . The bed head panel made of high strength extructed aluminium profile with powder coating with choice of colour to suit the interior decor of the hospital complete all as specified & directed. Each bed head panel shall be provided with the following :- (i) Oxygen outlet point. (ii) Suction outlet point. (iii) Comp. Air outlet point. (iv) 5/15 amp electrical socket 4 Nos`aluminium railing to accommodate IV stand ward vacuum unit and infusion pump stand complete all as specified & directed.

BPC Flow Meter :- S&F back pressure compensated flow meter with flow range 0-15 ltr/m, high quality brass body with unbreakable humidifier bottle complete all as specified & directed

Supply, installation, testing and commissioning of area alarm system pneumaticaly four channel micro processer control alarm for 2 gases and vacuum services with digital display of line pressure for all the services with factory calibrated pressure sensors. Colour coded LED display of line pressure status (High->caution->normal->caution->low). It has audible alarm for high & low pressure condition for facility of alarm limit for all four gases operates on 230 volt AC supply.

M&L providing earthing complete with GI earth plate electrode of size 60×60cm ×3.15 mm thick electrode and 20×3mm copper strip as earthing lead burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 20×3mm copper strip as earthing lead by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.5 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 32 mm bore GI pipe (light grade) for protection of earth lead etc. complete all as specified and directed.

M&L copper strip 20 x 3.15mm with saddles and fixing screws etc for roof conductors and down conductors of pole and above ground with require connected items complete all as specified and as directed. Note : All joints of copper shall be of brazing only and including in quoted rates of items.

S&F in repair test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 32 mm long hex. head screw complete all as specified and directed.

M&L for termination single pointed copper rod.12mm dia 300 mm fixed to roof and pole including required accessoreis for fixing complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable, foundation etc, and getting out in hard /dense soil all as directed.

Excavating in trenches not exceeding 1.5m wide and exceeding 1.5m in but not exceeding 3.0m depth for laying of cable, foundation etc, and getting out in hard /dense soil all as directed.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25cm thick with dry type of soil complete all as specified and as directed.

Removing excavated surplus soil to a distanc3 not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

Supply and fix steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts nut and screws as specified type 410 SP-55 (11.0 meters long) including two coats of aluminium paint over a coat of red oxide primer all as specified and as directed. Note : Necessary earth work excavation, removal of surplus soil & concrete shall be measured and paid separately in respective items.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate for foundations / filling around the post all as specified and as directed.

Material and labour for plain cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate for path ways, hard standing & pole coping including necessary form work and applying two coats of white wash on exposed surfaces etc complete all as specified and directed.

Material and labour for jumper connections between two pole from top to top with ACSR conductors of suitable size and length (Weasel) including necessary lugs wherever required / aluminium heavy duty PG clamps / binding properly without any loose contact all as specified and as directed.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 .

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete.

M&L rendering 10 mm thick in CM 1:4 on fair faces of concrete finished even and fair on wall.

M&L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted over a coat of chalk whiting, complete all as specified & directed

M&L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed.

BHARATI ENTERPRISES