8666 WELCOME MAINT PERIODICAL SERVICES INCLUDING ALLIED WORKS TO MD OTM ACCN UNDER THE AOR OF AGE BR III UNDER GE SOUTH PUNE

Amount

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, including dismantling PCC floor / tiles of any type including cement mortar bedding layer and removing of debries & dismantled materials up to a distance exc. 250m n. exc. 500m complete all as specified and as directed

M&L for 20-25 mm thick Machine cut kota stone slab flooring over 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc including dismantling of existing stone slabs / tiles including beding layer and removing of debries & dismantled materials up to a distance exc. 250m n. exc. 500m complete all as specified and as directed

M&L 20-25 mm thick machine cut kota stone slab, single piece as in steps, riser, dado or skirting etc and other similar work laid over and including 10mm thick screed bed in CM 1:4, set and jointed with grey neat cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing etc with and including triangular filleting in CM 1:4 on top edges skirting including dismantling of existing stone slabs / tiles including beding layer and removing of debries & dismantled materials up to a distance exc. 250m n. exc. 500m complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping even and smooth and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) including demolition of cement concrete of any description in floors and paving n. exc. 15 cm thick and removal of debris and demolished materials to a distance up to 500 m complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished with sand faced plaster including taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:4 on brick / concrete surfaces as on walls finished even and smooth without using extra cement including taking down of old existing cement plaster from brick / block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for preparation of new plastered surfaces of any description and applying two coats of plastic emulsion paint over and including 2mm thick wall care putty, complete all as specified and as directed

M&L for coloured glazed ceramic designer tiles as on vertical surface, 600x 300x 7mm thick size, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster in CM 1:4 with and including triangular filleting in CM 1:4 on top edges including dismantling of old existing wall tiles including backing coat and removing of debries & dismantled materials to a distance exc. 250m n. exc. 500m complete all as specified and as directed

M&L for vitrified tiles, double charged, 10 mm thick (square/ rectangular) polished, of 600x1200mm size, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 20 mm thick screed bed in cm 1:6 including dismantling of old existing floor, hearth etc of any type including cement mortar bedding and removing of debries etc etc up to a distance exc. 250m n. exc. 500m complete all as specified and as directed

M&L for vitrified tiles, double charged, 10 mm thick (square/ rectangular), of 600x600mm size, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick screed bed in cm 1:6 including dismantling of old existing floor, hearth etc of any type including cement mortar bedding and removing of debries etc etc up to a distance exc. 250m n. exc. 500m complete all as specified and as directed

M&L for vitrified tiles, double charged, 10 mm thick (square/ rectangular), of 600x600mm size, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10 mm thick plaster in cm 1:4 with and including triangular filleting in CM 1:4 on top edges including dismantling of old existing wall tiles including backing coat and removing of debries & dismantled materials to a distance exc. 250m n. exc. 500m complete all as specified and as directed

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain coloured flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In- Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows & other Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Mild steel hold fast / lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Taking down door shutter not exc 1.0 sqm each any description and re-fixing in same opening after resecuring or easing and adjustment and also re-fixing builders hardware etc complete all as specified and directed.

Taking down door shutter exc. 1.0 sqm but not exc. 2.0 sqm each any description and re-fixing in same opening after resecuring or easing and adjustment and also re-fixing builders hardware etc complete all as specified and directed.

M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws etc including taking down of old unserviceable frame work etc complete all as specified and drawings as provided by Engineer-in-Charge

M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming toIS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass/ stainless steel screws etcincluding taking down of old unserviceable frame work etc complete all as specified and drawings as provided by Engineer-in-Charge

S&F sheet glass 4 mm thick ordinary quality exc. 0.50 Sqm in each pane and glazing with oil putty or glazing pins / spring clips with steel frames including hackingout of existing broken glass complete all as specified and directed

S&F sheet glass 4 mm thick frosted ordinary quality exc. 0.50 Sqm in each pane and glazing with oil putty or glazing pins / spring clips with steel frames including hackingout of existing broken glass complete all as specified and directed

S&F stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

S&F mild steel framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders: framed balusters, wall ways, railings, frame work of water tanks and similar work confirming to Fe.290.Gde-E-165 including dismantling of old existing unserviceable framed work complete all as specified and directed.

S&F aluminium anodised grill of approved design & pattern with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, including dismantling of old existing unserviceable grill and removal from the site complete all as specified and directed.

S&F solar control film 25 micron, reflective type, sticked to glass panes as per manufacturer’s instructions complete all as directed

S&F in repairs 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including second class hardwood beads of suitable size including dismantling of old existing unserviceable partition / shelves or shutters etc complete all as specified and directed.

S & F Continuous (piano) hinges of 20 mm flap width, Stainless Steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repairs 2nd class hardwood Plain fillets sectional area exc. 6.0 sqcm and n. exc. 13 sqcm , square, rectangular or triangular in section, wrought, secured with screws complete all as specified and directed.

S&F in repairs 2nd class hardwood plain fillets n. exc. 3 sqcm in section, square, rectangular or triangular in section, wrought, secured with screws to partcale board as leaping complete all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F butt hinge, medium weight, cold rolled mild steel 75mm long complete all as specified and as directed.

S&F stainless steel butt hinge, medium weight, cold rolled, 100mm long complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specified and as directed.

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc. 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs 15mm bore GI pipe "medium grade" (concealed) including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed. Note for item nos. 41 & 42:- The necessary cost of scaffolding / safety measures etc shall be deemed to be included in quoted rates as the work has to be carried out up to 12.00m elevated height of building

S&F in repairs 20mm bore GI pipe "medium grade" (concealed) including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

S&F in repairs 20mm bore ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repairs bib taps CP 15mm bore fancy type with wall flange conforming to CAT No.ORP-CHR-10037PM of "Jaquar" or of Equivalent cat part from makes as specified here-in-after, complete all as specified and directed

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered "Hof or "Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, cat no FLR-CHR-5011N of "Jaquar" or of Equivalent cat part from makes as specified here-in-after, complete all as specified and directed

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms), complete all as specified and directed.

S&F in repairs PVC connection pipe 450mm long with 2 Nos. brass check nuts suitable for 15mm bore of pipe with washer etc. complete all as specified and directed.

S&F in repairs PVC connection pipe 600mm long with 2 Nos. brass check nuts suitable for 15mm bore of pipe with washer etc. complete all as specified and directed.

S&F in repairs stop cock ISI Marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs stop cock ISI Marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 20mm bore complete all as specified and directed.

S&F in repairs brass spindle 01 & 3 No. suitable for bib / stop cock, angle cock, pillar cock of any size and type, complete all as specified and directed.

S&F in repairs brass spindle 04 & 5 No. suitable for wall or basin mixers of any size and type, complete all as specified and directed.

S&F in repairs PTMT waste fitting 32/40mm bore suitable for WHB / sink complete all as specified and directed.

S&F in repairs waste coupling, brass chromium plated 32mm dia suitable for WHB, complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass chromium plated 38/40 mm dia suitable for sink, complete all as specified and directed.

S&F in repairs 10 Itrs capacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs 500 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed.

S&F in repairs 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed.

S&F in repairs 2000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, three layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia of suitable length, suitable for low level cistern including jointing to WC complete all as specified and directed.

S&F in repairs 32mm bore, 750mm long PVC waste pipe suitable for WHB complete all as specified and direcetd.

S&F in repairs 38/40 mm bore and 75 cm long PVC/waste pipe suitable for sink complete all as specified and directed.

S&F in repairs vitreous china ceramic, white, single piece, WC (S or P trap with UF soft close seat cover, hinges, accessories set, size 365x655x765mm, product Code: LYS-WHT-38851S of “Jaquar” make or of equivalent cat part from the make as mentioned here-in-after, complete all as specified and directed

S&F vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair of size 580x440mm white including with intergral foot rest with 'P' or 'S' trap complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc, complete all as specified and directed.

S&F in repairs 2mm thick PVC fibre mirror cabinet of size 450x325x120mm and fixed to wall after taking down old mirror, complete all as specified and directed. Make- CERA or Equivalent

S&F in repairs CP wall mixer of 15mm bore of pipe conforming to CAT No. CQT-23273UPR of "Jaquar" or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder with flap recessed type stainless steel CP Cat ID AHS-1533 of Jaguar or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs soap dish, brass chromium plated, Cat ID AHS-1531 Jaguar or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs, two way bib cock with wall flange, brass, chromium plated toilet fittings conforming to CAT No. FUS-29041 of jagur or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs wash hand basin CP brass mixer suitable for mixing of hot & cold water as approved pattern, screwed down for 15mm dia iron pipe, complete all as specified and directed by Engineer in charge. Make : Jaquar cat no.OPP-CHR-15011BPM or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repair health faucet cromium plated including with 1000 mm long pipe, complete all as specified and directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as specified and directed.

S& F in repair sheet glass (5mm thick) corner shelf 450x100mm including CP railing and CP brackets, complete all as specified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as specified and directed.

S&F in repairs brass CP towel rail 600 mm long 20mm dia fixed with plastic guities with steel screws etc., complete all as specified and directed. by Engineer in charge..

S&F in repairs towel ring of brass CP 200mm size, fixed with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed

S & F in repair angle cock, fancy type, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Cleaning the surface with wire brush, detecting sources of leakages and removing / taking down unserviceable treatment / surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection should have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent make as approved complete all as directed by Engr-in-charge.

M&L for preparation of old decorated surfaces by brooming down and scrapping wherever necessary and applying one coat of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns etc complete all as specified and directed. Note:- Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality

M & L for complete removal or existing treatment from old decorated surfaces of walls / celling, soffits / facia of chajja / roof projection etc and applying two coat of plastic emulsion paint over a coat of primer after preparation o f surfaces complete all as specified and directed

S&F in repairs readymade pulley operated clothes drying system including of 4 No. aluminium pipes of suitable dia and 2.80m long each (04 pipe set) including channel assembly, locking system, ropes etc complete all as directed by Engr-in-charge Make- Easy Dry or equivalent make as approved

M&L for preparation of new surface and applying two coats of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & Sqm projected columns over and including priming coat of exterior primer etc complete all as specified and directed. Note:- Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality

PRANAV ENTERPRISES (BID ID -3279758)

PRASHANT CONSTRUCTION (BID ID -3279575)

Sunny Enterprises (BID ID -3278087)

Gauri Associates (BID ID -3279467)

PAL CONSTRUCTION (BID ID -3279454)

shiva traders (BID ID -3279708)

L.T Associate (BID ID -3279804)

SHREESAMARTH CONSTRUCTION (BID ID -3279598)