Mntce Zone-A

SUB HEAD: SCHEDULED ITEMS Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead (a) With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes, with putty and nails wherever necessary including raking out the old putty: (a) Float glass panes of thickness 4 mm

Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (a) Circular tank/Rectangular

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :(I) With F.P.S. brick tiles

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (a) With stainless steel cover plate minimum 1.25 mm thickness.

12 mm cement plaster of mix : (a) 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : (a) 1:6 (1 cement: 6 fine sand)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (a ) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (a) Of area 3 sq. metres and below

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. (a) In cement mortar

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (a) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Kiln seasoned and chemically treated hollock wood 35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood 35 mm thick

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood 30 mm thick

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing to existing door frames. 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/ 10 sqm)

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more

SUB HEAD : SERVICES: Clearing of chocked sewer manhole and removing all rubbish etc. complete in all respect as per the direction of Engineer-in-Charge.

Re-setting of aluminum door, tightening of cleats etc.replacing of pivots or aluminium hinges or rubber gasket wherever required including steel screws etc. all complete.

Cleaning of Terrace including khurras ,floor cleaning including removal of rank vegetations, grass etc. and disposal upto 50m lead all complete as per direction of Engineer-in-Charge.

Providing the plumbing services with skilled plumber for attending the maintenance complaints like repairs to water supply equipments and sanitary installations in the BSNL building Compounds within the Municipal limits of Jammu City complete as per direction of Engineer-In-Charge. Note: The agency shall provide all the necessary tools & plants , ladder, scaffolding wherever required including mobile phone and conveyance to the worker for attending the complaints. (Nothing extra shall be paid on this account.) The materials / fitting required shall be paid for seperately.

Providing the carpenter services with skilled carpenter for attending the maintenance complaints like repairs to wooden/steel/pvc doors , windows, partitions , pelmets ,cupboars and other fittings etc. in the BSNL building Compounds within the Municipal limits of Jammu City complete as per direction of Engineer-In-Charge. Note: The agency shall provide all the necessary tools & plants , ladder, scaffolding wherever required including mobile phone and conveyance to the worker for attending the complaints. (Nothing extra shall be paid on this account.) The materials / fitting required shall be paid for seperately.

Providing the sewer / drain line services with sewer man for attending mtc. complaints like removing /clearing of internal blockage of floor traps ,water clsets , urinals and sewerage pipes in shaft by way of rodding and flushing with requisite quantity of surplus water etc , disinfecting by way of spraying disinfectent etc in the BSNL building Compounds and removal of sludge outside the building premises and dumping within the Municipal limits of Jammu City complete as per direction of Engineer-In-Charge. Note: The agency shall provide all the necessary tools & plants and disinfectant etc wherever required for attending the complaints. (Nothing extra shall be paid on this account.) The materials / fitting required shall be paid for seperately.

SUB HEAD: NON SCHEDULED ITEMS Removal of Plantation of all types of trees from the roofs, shafts and from other parts of the Building at all heights and removing its roots, and pouring necessary acid or equivalent chemical in the roots of plants and making good the same complete including extra by using the ladder , Jhula, Scaffolding including supporting labourers etc above 3.00 metre from plinth level and upto all heights all complete as per the directions of Engineer-in-Charge. as per direction of Engineer-in-Charge

Disposal of sewerage rubbish / malba / similar waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond municipal limits initial lead, for all loads including all lifts involved.

Supplying the following items FROM Sr. No 44 To 106 as and when required as per approved brand and approved manufacturer( ISI marked) complete as per direction of Engineer-In-Charge. Flushing Cistern P.V.C. 10 litre capacity ( low level ) (In all colours as per direction of EIC)

White plastic seat (solid) with lid C.P. brass hinges and rubber buffers (a) White solid plastic seat cover with lid

Vitreous china flat back wash basin (a) Flat back wash basin 550 x 400mm

Flexible (coil shaped) PVC waste pipe for sink and washbasin 32 mm dia with length not less than 700 mm i/c PVC waste fittings.

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Brass face for C.P. brass pillar cocks/ bib cocks/stop cocks etc.

CP stainless jali grating (a) 100mm dia

Hydraulic door closer tubular type Aluminium section body

Aluminium hanging floor door stopper with twin rubber & stopper

Brass bib-cock 15 mm dia

Brass stop-cock 15 mm dia

CP bass bib cock confirm to IS:8931 (a) 15mm nominal bore

CP brass long body bib cock confirm to IS:8931 (a) 15mm nominal bore

CP brass angle valve confirm to IS:8931 (a) 15mm nominal bore

uplasticised PVC connection pipe with brass unions (a) 30cm length (i) 15mm nominal bore

CP spray jet for european wc pan,15mm nominal bore

CP brass pillar cock (Heavy type) confirm to IS:8931 (a) 15mm nominal bore

CPVC Pipes of approved make for water supply (a) 20m dia nominal bore

CPVC Pipes of approved make for water supply (b) 25mm dia nominial bore

CPVC Pipes of approved make for water supply (c) 40mm dia nominial bore

Aluminium Tower Bolts 200 x 10mm

Aluminium Tower Bolts 150 x 10mm

Aluminium Handles 100mm

Aluminium Handles 75mm

Aluminium Sliding Door bolts 200 x 16mm

18mm thick block board BWP ( commercial )

4mm thick plywood BWP( commercial )

Curtain rod 20mm dia. SS pipe

Curtain rod 20mm dia. MS pipe

Brass ball valve with lever handle. 15 mm

Brass ball valve with lever handle. 20 mm

Brass ball valve with lever handle. 25 mm

Translucent poly carbonate sheets of approved brand and manufacture of thickness not less than 2.0 mm.

Female/ Male Threaded Adaptar [MTA]. 20mm n/bore

Female/ Male Threaded Adaptar [MTA]. 25mm n/bore

M-seal / Aral-seal (a) A pack of 75 gm.

Toughened tapes

PVC Gatti [rawl plug] (a) 50mm long (i) Pack of 100 Nos

CP brass Two Way angle Valve 15mm nominal Bore

CPVC TEE 20mm n/bore

CPVC TEE 25mm n/bore

CPVC Tank Nipple 25mm n/bore

CPVC Elbow 25mm n/bore

C.P Brass shower Square/ Round upto 100mm dia/ side. 15mm n/bore.

Jointing cement/solvents for Jointing of CPVC Pipes. A Pack/bottle of 118ml

GI Elbow 15mm n/bore

GI Elbow 20mm n/bore

GI TEE 15mm n/bore

GI TEE 20mm n/bore

GI Nipple 15mm n/bore (1) Upto150mm long

Ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (a) 15 mm nominal bore

Ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (b) 20 mm nominal bore

MS black Screws (a) 25 mm long a Pack of 100 Nos

MS black Screws (a) 50mm long a Pack of 100 Nos

White Cement (a) A pack of 1 Kg

Portland Pozzolana Cement 43 grade (a) A bag of 50 Kgs

Coarse Sand

Stone Agrregate 20mm n/size

Brass Waste coupling for sink and wash basin (a) 32 mm n/bore

White vitreous china water closet (European type W.C. pan)

White vitreous china water closet squatting pan (Indian type) (a) Long pattern W.C Pan of size 580x440 mm

Ball cock for cisterns ( For PVC low level cistern)

Cistern Handles ( For PVC low level cistern)

Credit for old dismantled / unserviceable material from Sr. No. 107 To 118: - Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose, brass gate valves, CP ring,CP brass towel rail etc. of all dia

brass face

Floor spring

Door closer

Brass lock

PVC Bib cock,stop cock, ball cock/WC seat cover, internal fitting of low level PVC cistern etc.

PVC flushing cistern

CP gating of all sizes

PVC Connection/PVC waste pipes

GI pipes 15mm nominal bore

GI pipes 20mm nominal bore

Reinforcements bars

Please Enable Macros to View BoQ information