M.S. Structural Steel work along with the painting at Bottom Ash Silo #7 under DPPS, DPL.Job No. 932/DPPS.

Removing loose scales blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface : With super gloss (hi-gloss) – (iv) Two coats (with any shade except white)

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of consumables such as electrodes, gas and hires charge of all tools and plants and labour required for the work including all incidental charges such as labour insurance charges etc. For structural members of specified sections weighing less than22.5 Kg. /m (MS structural material will be supplied by the agency).

Welding in M.S. structural work with gas or electric: b) Continuous weld.

Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc.

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia. bamboo as main posts at the rate of 1 meter center to center and 7.5 cm. dia. bamboo ties @ 0.75 meter apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in charge at 3.90 m height.

Labour for lowering and stacking after dismantling in parts R.S. joists, channels, angles, tees, plates etc. complete as directed. From 1st floor level.

Carriage of Steel materials over pucca road. Up to 5 KM.