SPECIAL REPAIRS OF CONCERTINA COIL AND BARBED WIRE AT VARIOUS PLACES ON PERIMETER OF WED MANKHURD AND SPECIAL REPAIRS TO LADDERS AT WED MANKHURD AND PROVISION OF STORES AND REST/CHANGING ROOMS AT 2ND MEZZANINE FLOOR AT SRU (W) OP FACILITY AT MANKHURD

Amount

Surface dressing n exc 15 cm deep and getting out in hard/dense soil

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in Hard/Dense soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

Removal of excavated material (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 above the starting point.

M&L for Cement concrete Type B2 1:2:4 (40mm Graded aggregate) in foundations, filling and mass concrete

M&L for Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 100mm thick as in floors

S&F in repairs for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required Superficail area exc 150 sq cm but n.exc 400 sq cm in each hole

M&L for Preparing surfaces of steel and iron work, of any description and girth, not otherwise described, and treated with tar or coal tar black paint as in treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each,

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide

M&L for demolition of Concrete of any description provided in bed blocks coping etc and in any position reinforced or unreinforced not otherwise specifically provided for and including providing for Cement Concrete Type B1 1:2:4 (20mm graded aggregate ) in bed blocks, coping, lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as directed and as specified by Engineer in Charge.

S&F in Repairs for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F in repairs for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F in repairs for Medium Blade Profile Concertina Coil 600mm dia (8 Spiral Per Running meter) made from 2.5mm thick High tensile galvanised steel wire of tensile 1500 Mpa with razor shaped barbes of 0.5mm galvanised steel wire of 22mm length and 16mm width out to out and 35mm spacing centre to centre fixed completely approximately weighing 1.42 Kg/mtr and completely all as specified and as directed.

M&L for Rendering 15mm thick in CM 1:4 on fair face of brick /concrete surfaces finished fair and even

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Note : Prelaminated items, sheet glass, particle boads will be supplied only

Supply 12 MM TH Veneered particle board, solid core, exterior grade, with decorative face veneers both face complete all as specified and directed

Supply 4mm thick plain sheet glass, ordinary quality, in squares exc 0.5 sq. m each all as specified and directed

S&F 605 X605 MM Anodised aluminium snap grid frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing of fixing Gypsum Board 12mm thick in ceiling fixed with screw as specified and directed

Precoated Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, light shade

S/F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F mild steel 4 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed

M & L for point wiring with PVC insulated FRLS unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC casing-caping, fixed on wall / ceiling surface with all accessories, fittings, PVC junction boxes etc, with suitabe sunk pressed steel boxes for modular fittings not less than 1.6 mm thick, including Modular cover plate of suitable size etc with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes concealed in wall mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for one light / fan / bell point controlled by one switch.

-Ditto- all as per item No 01 here-in-before but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board.

All as per item No. 01 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board

S&F modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 16 A one way SP switch 1 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed.

Supply & Fix Modular Bell push flush type 6 Amp, 1 module, 230 Volts complete all as specified and directed.

Supply and fix bell ding dong AC 230 V single pole. complete all as specified and directed.

S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed

S & F Modular cover plate 8 modules

S & F Modular cover plate 3 modules

S & F Modular cover plate 2 modules

S & F Modular cover plate 1 modules

S & F ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.

S & F 20-22 W capacity surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, CCT 4000K to 6000K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, CRI> 80, lamp burning hours not less than 50000, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor PVC insulated cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Make : BAJAJ/JAQUAR/WIPRO

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

Supply & fix in repairs Pedestal Fan 450 mm sweep, operating on single phase, 230V, AC, 50 Hz having speed of 1400 RPM, air delivery 115 CMM, power output of 100W star rated along with blade, canopy, mounting brackets, rubber insulator. Make - Bajaj ( model - 250439) or equivalent of ALMONARD / ORIENT

S & F MCB DB, 8 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections, complete all as specified and directed. Note: Quoted rate shall also be deemed to include for provision of copper bus bar of 200 Amps rating.

S&F MCCB DB, TPN, double door, 4 way IP 43 metal body having earth terminal, neutral bus terminal for 4 way circuits complete in all respect fixed on wall including making electrical incoming and out going connections with lugs/thimbles complete all as specified and directed.

S & F MCB, SP, 05 to 32 Amps, 240 Volts, 10 KA Breaking capacity, C-series, complete all as specified and directed.

S & F MCB, SPN, 40 Amps, 240 Volts, 10 KA Breaking capacity, C-series, complete all as specified and directed.

S & F MCCB 100Amps, 4 pole, 16KA, 415 volts including connecting up complete all as specified and directed.

S & F MCB, TP, 40 Amps, 415 Volts, 10 KA Breaking capacity, C-series, complete all as specified and directed.

S&F in repairs single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall and directed. Make :- LEGRAND/ SCHEINDER/ L&T

M&L for sub main wiring using proper colour coding with three run of single core PVC insulated (one run of 4 sqmm for earth wire), FRLS, unsheathed suitable for 1100 volts multistranded copper conductor cable of size 4 Sqmm, drawn in and including PVC Casing Caping medium grade of suitable size ISI marked fixed in wall / roof etc with required acessories complete all as specified and directed.

M&L for sub main wiring using proper colour coding with three run of single core PVC insulated, FRLS (one run of 6 sqmm for earth wire), unsheathed suitable for 1100 volts multistranded copper conductor cable of size 6 sqmm drawn in and including PVC casing caping medium grade of suitable size ISI marked fixed in wall / roof etc with required acessories complete all as specified and directed.

Supply & Laying PVC insulated, armoured, heavy duty, 1100 volt grade electric LT UG cable with multi stranded aluminium conductor of size 25 Sqmm 4 Core, saddling the cable in duct/wall etc and making all connections, complete all as specified and directed. Note : A sum of Rs 1,14,455.00 towards sch of credit shall be deducted to arrive the contract sum.

M/s Hari Om Construction

mp construction co

Parmatma Enterprises

Joy builders