Loading
Loading…
Loading…
Tender Value
₹4.9 L
EMD Value
₹9,718
Closing Date
29 Aug 2026, 12:00 pmDue tomorrow
EXECUTIVE ENGINEER REW BANDIPORA
EXECUTIVE ENGINEER REW BANDIPORA
DEVELOPMENT OF PRIMARY HEALTH CENTRE AT SADUNARA -A
2026_RDPR_321893_28
NIT75
Open Tender
Civil Works
Percentage
EXECUTIVE ENGINEER REW BANDIPORA
Please refer Tender documents.
2 documents required · 2 mandatory
₹300
Rural Development and Panchayati Raj
₹9,718
24 Aug 2026
24 Aug 2026
29 Aug 2026
24 Aug 2026
29 Aug 2026
24 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating holes more than 0.10 cum and upto 0.5 cum including returning the soil as required in layers not exceeding 20 cm in depth, layer by ramming, watering etc, disposing of surplus excavated soil; as upto 1.5m in: 2.13.1 All kinds of soil. By manual | 27.67 | No | 206.6 | ₹5,716.62 |
| - | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 1.84 | Cum | 6,591.25 | ₹12,127.9 |
| - | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position all complete WITHOUT PRIMECOAT | 863.24 | Kg | 116.3 | ₹1,00,394.81 |
| - | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 16.25.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade | 92.53 | Sqm | 852.05 | ₹78,840.19 |
| - | Painting steel work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90 litre/10 sqm over an under coat of primer applied @ 0.80 litre/10 sqm of approved brand and manufacture (Allow 10% Qty Only) | 9.26 | Sqm | 131.85 | ₹1,220.93 |
| - | Carriage of different material by mechanical transport – Sand 2 km, | 0.83 | Cum | 147.44 | ₹122.38 |
| - | Carriage of different material by mechanical transport – Bajri 22 km | 1.65 | Cum | 432.02 | ₹712.83 |
| - | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-in-charge and panelling with panels of: 9.7.3 12 mm thick pre-laminated particle board | 11.26 | Sqm | 3,044.25 | ₹34,278.26 |
| - | Providing and fixing 30 mm thick factory made laminated veneer lumber glazed shutter conforming to IS:14616 and TADS 15:2001 (Part B), using frosted glass panes 4 mm thick for doors, windows and clerestory windows | 14.26 | Sqm | 2,576 | ₹36,733.76 |
| - | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 9.75.1 250x10 mm | 8 | No | 373.35 | ₹2,986.8 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.42 MB
BOQ_1076474.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].