TTPS Operation Circle CAD CWPH-I Charges for Dismantling, lifting and strengthening the base support frame of CWPH-I LT switchgear of units I, II III

Charges for Laying / Releasing the 3C X 185 Sq.mm. LT Aluminium Power Cable Between CWPH-I and CWPH-II for provision of Temporary Power Supply to CWPH-I.

Glanding & Termination charges for 3C X 185 Sq.mm. LT Aluminium Cable for Temporary Power Cable.

De-Termination charges for LTUG. Aluminium armoured cable in LT switchgear Panel.

Charges for excavation of earth up to 1.5 M depth and refilling the same excavated earth after laying the cable.

Charges for releasing of all the top and side cover plate of main bus bar chamber, removal of bus bar from the supporting insulator in each panel in the switchgear.

Charges for Lifting & shifting the panel using chain block and transporting the same outside the Switchgear room.

Charges for removal of existing demaged bottom base structure angle for LT panel by gas cutting for one panel area.

Loading the panel from outside of Repair pay, Transporting to the location and unloading the panel.

Charges for fabrication and erection of MS Structurals and patch up work.

Charges for excavation the earth, erection of 3 meters copper earth rod in the pit, transporting the fly ash from ash silo to transformer yard, filling up the fly ash in the earth pit, connect the clamps in the earth pit.

Charges for fabrication of 1 no earth pit tub cover 0.75m x 0.75m x 0.006 m thickness by Gas cutting, welding and painting.

Laying of GI earth flat : Charges for laying of existing GI earth flat size 50 x 10 mm by cutting, bending, welding,providing fixing holes and entry holes in walls for 12 meter.

300 x 140 I – Beam

ISMC 100 x 50 x 5.0 H – Channel

ISMC 65x65x6 mm - Channel

ISMC 150 x 75 x 5.7 mm Channel

M.S. Chequered Plate (Beam, Angle & Stiffener base Plate)

M. XAVIER CONTRACTOR (BID ID -1135383)