Turfing of Lawn and Permanent Hedges in Workshop Division Charkhi Dadri.

Amount

Surface dressing of the ground in all kind of soil including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (HSR item 4.4.1)

Excavating, supplying and filling of local earth (including royalty) cum by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (HSR item 4.33)

Loading, Unloading and carriage of earth for additional 6 Km (HSR item 3.1.2)

Earth work in excavation in all kind of soils by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 4.14.1 All kinds of soil. (HSR Item 4.14.1)

Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in Cement Sand Mortar 1:6. (HSR Item 7.21.2)

10 mm thick cement plaster in Cement Sand 1:3 with fine sand. (HSR Item 11.4.2)

Providing and laying in position cement concrete in 1:3:6 with 20mm stone aggregate excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level. (HSR item 6.1.4)

Uprooting rank vegetation and weeds by digging the area sqm 40 to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 1 o to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. (HSR Item 26.4.8)

Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth, mixed with farm?yard manure, supplied at the rate of 1.62 cum per 18 sqm, DAP 0.6kg, Chlorpyriphos 20%EC@ 0.20 litre per 18 sqm and supplying and planting hedge at 30 cm apart in two rows @ 202 no. well trimmed bushy ,multi-branched ,30 cm to 45 cm in height plants to be supplied in 15 cm x 15 cm poly bags per 18 sqm (HSR item 26.34)

Supply and planting flower beds including digging 30 cm sqm deep bed and refilling of beds with excavated soil and FYM 0.0508 cum per sqm , Fertilizer DAP 50 gms and insecticides chlorpyriphos 10 ml per sqm , planting of F1 hybrid flower saplings to be supplied in tray pots / thumb pots at 20 cm distance from plant to plant and row to row minimum 25 no . plants per sqm (HSR item 26.22.2)

Edging of paths/ beds with bricks inclined at 60 degree with horizontal laid dry, including required excavation, refilling, consolidating with hand and spreading neatly surplus earth within a lead of 50 meters (HSR item 26.55.4)

Providing & fixing of Haridwar Pebbles( White river stone size of 2" to 2.50"dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc. as per direction of office in charge. (HSR item 26.58)

Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications. (HSR item no.26.58.1)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR Item No. 22.181)

Providing and fixing G.I. pipes of Nominal bore 20mm complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (HSR 22.87.2)

Providing and fixing G.I. pipes of Nominal bore 15mm complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (HSR 22.87.1)

Providing and fixing G.I. pipes complete with G.I. fittings up to 0.30m to 1.00m depth and refilling etc.including trenching (Hsr item 22.91.1)

Providing and fixing ball valve (brass) 20MM nominal bore of approved quality, High or low pressure, with plastic floats complete. (HSR item 22.103.2)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) of 20mm bore. (HSR Item No. 22.98.2)

Providing and fixing brass stop cock 15mm nominal bore of approved quality (HSR item No.22.97.1)

RAJESH SANGWAN

Naresh Kumar Contractor

SATYAPAL SINGH CONTRACTOR

Charanjeet Singh Contractor

DEEPAK CONSTRUCTION COMPANY

AVTAR SINGH CONTRACTOR